dacoontz
Member
PLEASE CLOSE
Prices including shipping via USPS first class or priority, whichever is more reasonable. I do my best to describe condition but please see pictures and ask questions if not clear. I'll take just about any form of payment including Paypal (+4% for fees). Personal checks must clear before shipping items, if paying that way. I don't wait to ship on personal checks for people I have done good business with in the past or S&WCA members.
I am simply posting the parts with measurements but please don't ask me what model these will or will not fit as it is somewhat complicated. It is up to you to know if the part fits your gun or not. Some are NOS and some appear to have been used. All measurements are approximately using digital calipers.
First I'll take it followed by a PM has buying priority.
First group are 45 auto 5 inch barrels. Please notice that 2 of them are different than the other. Width of barrel at ramp end are .695 inches. Ramp width on the 2 wider are .35 inches and thinner one is .3 inches. (Barrel with thinner ramp and hood is SOLD)
Price: $75 each.
SOLD Second Item is 3rd Gen Firing Pin. Length is 2.31 inches, looks new.
Price: $12. SOLD
Third Group are 9 mm Barrels, 1 (4 inch SOLD) and 2 (3.5 inch) (one with thinner width hood is SOLD) All have feed ramp of .272 inches and barrel width of .62 inches. One of the 3.5 inch barrels has "S" and "p" stamped on bottom of feed ramp while the other has "T" stamped on it. Of the 2 barrels with 3.5 inch length the one with the "T" has a wider hood of .4 inches while the other measures the same as the ramp at .272. The 4 inch barrel also has a hood width of .4 inches.
Price: $65 each.
Fourth group are guide rods of various types and sizes. This group has the longer 2 tiered plunger. One is longer at 3.87 inches and is stainless steel with a larger diameter rod like for the 10mm, 40 and 45 cal. The two smaller blued rods measure at 3.49 inches are are also made of steel.
(Top rod is sold)
Price: $12 each.
SOLD Fifth item is 40 S&W 4 inch barrel with a width of .62 inches. Feed ramp and hood measure .27 inches.
Price: $65 SOLD
Sixth group is another batch of the larger diameter guide rods. These are the kind that have the shorter plunger. Longer ones are made of aluminum and are 4.48 inches. The blued one is also made of aluminum and measure 3.6 inches. The shorter stainless one is 3.52 inches and is made of stainless steel. (Bottom rod is sold)
Price: $12/each
Seventh group are guide rod springs of various lengths and I would assume types. Please note that 2 of these look to have been non-factory shortened and 4 of them are coated on a red coating that comes off on your hands when you handle them. The longest of them measures just over 6 inches. The red coated ones measure right around 4.65 inches. The smallest one has been cut and the one just larger than the 4 red ones has also been cut.
Price: Choose one for Free if you purchase a guide rod otherwise $5.
Thanks for looking and always open to offers on multiple items are all of it. Thanks.
Another add on:
SOLD Nickel Combat Magnum Box in great shape. Includes all paperwork and tool kit minus the screw driver. Some small blemishes (see pics) that are mostly on one box side. This box was for a gun that was sold in the summer of 1979.
Price: $85 shipped. SOLD
Link to more pics of the box:
Nickel Combat Magnum Box Photos by dacoontz | Photobucket
______________________
Also for sale is a large lot of model 52 parts being sold as one complete package of parts.
I have already organized them in two divider boxes with corresponding part numbers per the parts list I was able to print off the inter web. Here's the link to the 52-2 parts list on a certain parts sellers website:
https://www.gunpartscorp.com/Manufacturers/SmithWesson-33495/AutoPistols-42024/52-2-35293.htm
I also have a written inventory of the parts which I will paste here at the end of my thread.
These parts are mostly NOS with a small percentage, maybe 10%, that have been on guns or show some superficial rust from being stored for a long time. I picked these up in Southern California from a parts distributor that has been selling off his parts.
I am always willing to entertain reasonable offers and may be willing to do partial trade/cash.
They'll be shipped USPS priority insured.
Here's what is included and I have also listed if that particular part is shown as sold out on the previously mentioned gun parts seller's webpage:
Parts in lot:
Part #, Quantity, Sold Out on Numrich
#3, 2, yes
#6, 4, no
#7, 1, no
#10, 15, no
#11, 8, yes
#12, 2, no
#13, 2, no
#14, 2, no
#20, 1, yes
#22, 58, yes
#23, 13, no
#27, 5, yes
#35, 9, no
#36, 9, yes
#37, 11, no
#38, 12, no
#39, 9, yes
#40, 9, no
#41, 18, no
#51, 4, no
#61, 5, yes
#62, 5, yes
#63, 12, no
#64, 13, no
#65, 13, no
#66, 10, no
#67, 9, no
#75, 31, no
#76, 6, no
#79, 6, no
#80, 4, no
#81, 7, no
#82, 11, no
Rear Sight 1, yes
Complete
Barrels 2, yes. ( A barrel just sold on flee bay for $391, maybe an anomaly but do the math)
Complete Slide
(no barrel) 1, yes
These parts if bought at website prices would be precisely $4804 before shipping costs are added.
As usual, the first "I'll take it" gets the parts. My price: $2250 shipped. REDUCED TO $1900 shipped. NOW $1750.
Here's a couple pics with a link to an album with pictures of everything included.
Model 52 Parts Lot Photos by dacoontz | Photobucket
Thanks for looking and I should mention that the only model 52 extractor is the one on the slide. There were none left in the guys supply when I bought these parts from him.
Prices including shipping via USPS first class or priority, whichever is more reasonable. I do my best to describe condition but please see pictures and ask questions if not clear. I'll take just about any form of payment including Paypal (+4% for fees). Personal checks must clear before shipping items, if paying that way. I don't wait to ship on personal checks for people I have done good business with in the past or S&WCA members.
I am simply posting the parts with measurements but please don't ask me what model these will or will not fit as it is somewhat complicated. It is up to you to know if the part fits your gun or not. Some are NOS and some appear to have been used. All measurements are approximately using digital calipers.
First I'll take it followed by a PM has buying priority.
First group are 45 auto 5 inch barrels. Please notice that 2 of them are different than the other. Width of barrel at ramp end are .695 inches. Ramp width on the 2 wider are .35 inches and thinner one is .3 inches. (Barrel with thinner ramp and hood is SOLD)
Price: $75 each.
SOLD Second Item is 3rd Gen Firing Pin. Length is 2.31 inches, looks new.
Price: $12. SOLD
Third Group are 9 mm Barrels, 1 (4 inch SOLD) and 2 (3.5 inch) (one with thinner width hood is SOLD) All have feed ramp of .272 inches and barrel width of .62 inches. One of the 3.5 inch barrels has "S" and "p" stamped on bottom of feed ramp while the other has "T" stamped on it. Of the 2 barrels with 3.5 inch length the one with the "T" has a wider hood of .4 inches while the other measures the same as the ramp at .272. The 4 inch barrel also has a hood width of .4 inches.
Price: $65 each.
Fourth group are guide rods of various types and sizes. This group has the longer 2 tiered plunger. One is longer at 3.87 inches and is stainless steel with a larger diameter rod like for the 10mm, 40 and 45 cal. The two smaller blued rods measure at 3.49 inches are are also made of steel.
(Top rod is sold)
Price: $12 each.
SOLD Fifth item is 40 S&W 4 inch barrel with a width of .62 inches. Feed ramp and hood measure .27 inches.
Price: $65 SOLD
Sixth group is another batch of the larger diameter guide rods. These are the kind that have the shorter plunger. Longer ones are made of aluminum and are 4.48 inches. The blued one is also made of aluminum and measure 3.6 inches. The shorter stainless one is 3.52 inches and is made of stainless steel. (Bottom rod is sold)
Price: $12/each
Seventh group are guide rod springs of various lengths and I would assume types. Please note that 2 of these look to have been non-factory shortened and 4 of them are coated on a red coating that comes off on your hands when you handle them. The longest of them measures just over 6 inches. The red coated ones measure right around 4.65 inches. The smallest one has been cut and the one just larger than the 4 red ones has also been cut.
Price: Choose one for Free if you purchase a guide rod otherwise $5.
Thanks for looking and always open to offers on multiple items are all of it. Thanks.
Another add on:
SOLD Nickel Combat Magnum Box in great shape. Includes all paperwork and tool kit minus the screw driver. Some small blemishes (see pics) that are mostly on one box side. This box was for a gun that was sold in the summer of 1979.
Price: $85 shipped. SOLD
Link to more pics of the box:
Nickel Combat Magnum Box Photos by dacoontz | Photobucket
______________________
Also for sale is a large lot of model 52 parts being sold as one complete package of parts.
I have already organized them in two divider boxes with corresponding part numbers per the parts list I was able to print off the inter web. Here's the link to the 52-2 parts list on a certain parts sellers website:
https://www.gunpartscorp.com/Manufacturers/SmithWesson-33495/AutoPistols-42024/52-2-35293.htm
I also have a written inventory of the parts which I will paste here at the end of my thread.
These parts are mostly NOS with a small percentage, maybe 10%, that have been on guns or show some superficial rust from being stored for a long time. I picked these up in Southern California from a parts distributor that has been selling off his parts.
I am always willing to entertain reasonable offers and may be willing to do partial trade/cash.
They'll be shipped USPS priority insured.
Here's what is included and I have also listed if that particular part is shown as sold out on the previously mentioned gun parts seller's webpage:
Parts in lot:
Part #, Quantity, Sold Out on Numrich
#3, 2, yes
#6, 4, no
#7, 1, no
#10, 15, no
#11, 8, yes
#12, 2, no
#13, 2, no
#14, 2, no
#20, 1, yes
#22, 58, yes
#23, 13, no
#27, 5, yes
#35, 9, no
#36, 9, yes
#37, 11, no
#38, 12, no
#39, 9, yes
#40, 9, no
#41, 18, no
#51, 4, no
#61, 5, yes
#62, 5, yes
#63, 12, no
#64, 13, no
#65, 13, no
#66, 10, no
#67, 9, no
#75, 31, no
#76, 6, no
#79, 6, no
#80, 4, no
#81, 7, no
#82, 11, no
Rear Sight 1, yes
Complete
Barrels 2, yes. ( A barrel just sold on flee bay for $391, maybe an anomaly but do the math)
Complete Slide
(no barrel) 1, yes
These parts if bought at website prices would be precisely $4804 before shipping costs are added.
As usual, the first "I'll take it" gets the parts. My price: $2250 shipped. REDUCED TO $1900 shipped. NOW $1750.
Here's a couple pics with a link to an album with pictures of everything included.
Model 52 Parts Lot Photos by dacoontz | Photobucket
Thanks for looking and I should mention that the only model 52 extractor is the one on the slide. There were none left in the guys supply when I bought these parts from him.
Last edited:
