Combat Magnum snubs, still using one?

[18DAI]

Combat Magnum snubs, still using one?

How many here are? Model 19 or 66?

What are you stuffing them with?

I'm still using a 2.5" 66-2 off duty, loaded with Winchester Ranger 110 grain +P+. The old Treasury load.

Love my 66 snubbie. Regards 18DAI.

 

[keith44spl]

2 1/2" 66

Yep, Remington GS 110er's

Su Amigo,
Dave

 

[38-44HD45]

Used my 2 1/2" 66-2 for the revolver portion of my instructor re-qual last fall. Occasionally carry it in a Bianchi 9R. It stays stuffed with Speer 158gr. Gold Dot .357s.

 

[Larry from Bend]

I still enjoy using my 2.5" nickle 19-3. I use 145 grain WW Silvertips in it. I carried it concealed for a few years in a Bianchi Pistol Pocket.

 

[ENGINE18]

19-3 and 66-2, both 2-1/2". I have never carried the 19-3 as it's almost perfect, and I rarely carry the 66-2. (My 65-5 is usually my go-to .357K-frame)

However, most of the .357 loads for the Ks are Mag Tech, Federal, and the like, in 158 SJSP or SJHP loads. All my Ks seem to like them.

 

[bronco45]

Model 19-4 2.5" in a Galco Speedmaster, a HKS Model 10A and a 6 round cartridge slide, with W-W 145 Silvertips

 

[ACP230]

I have an M19 snub, and an M66 snub. I bought the M19 because I thought I'd never find an M66. Not long afterward an M66 showed up in an ad in Shotgun News.
So now I have a pair of K frame .357 snubs.

I shoot a lot of .38 Special reloads made with 158 grain LSWCs in each gun. Other loads I've used include the Black Hills 125 grain JHP and a 140 grain JHP load, I think by Cor-Bon. The M19 really seems to like the Black Hills round. The M66 seems more partial to the 140 grain JHP.

 

[Xfuzz]

19-3 on a regular basis..same load as OP.

 

[snw19_357]

19-4 in a Bianchi #5 Black Widow w/ Federal C357B 125gr Hi-Shok.

I don't have to worry about the finish on this one.

 

[JLM]

I was using my mdl. 19, 2.5" until about 3 weeks ago when I got an LCR. The 19 is more accurate, but then again I've been shooting it for over 20 years. The LCR sure packs easier.

 

[dirtygrunt95]

Model 65 custom, 3" sq butt.

 

[RedBerens]

I occasionally carry this 66-1. My usual ammo is the Speer .38 Special 135gr. +P Gold Dot, but sometimes I use the Short-Barrel 135gr. Magnum load. I use one of Lobo Gunleather's pancake holsters, and a Dade Speedloader is carried in my front pocket. It's one of my favorite guns;

 

[chief38]

When in the woods, a 3" M 65 with BB Heavy 357 Magnum Ammo - 180 gr. L.F.N. -G.C. (1,400fps/M.E. 783 ft. lbs.) - 20 Round Box. If I have no need for something that heavy, I will go to my M 60 loaded with BB 38 Spl. 158Gr. LHP +P. (1040 fps out of a 2" bbl). Those work for me.

chief38

 

[Srigs]

You bet I do.

I carry my 66-1 2.5" with Gold Dot 357s in one of my The Slide OWB holsters. I carry it 30% of the time and most weekends when I'm up north.

Here is a pic of one of my original prototypes of The Slide I still use from 4 years ago.

Here is what it wears for grips now days.

 

[Trooper224]

My 2.5 inch 66 currently serves as our house gun, loaded with +P Gold Dots. Or rather I should say my wifes 66, as she's quite fond of it.

 

[balin]

19-4 in a Bianchi #5 Black Widow w/ Federal C357B 125gr Hi-Shok.

I don't have to worry about the finish on this one.

Looks like a beautiful gun. Looks to have been appreciated over the years!

 

[njdet354]

65 3"

dirtygrunt95
Nice 65. What finish is that you used on the stainless? What Tridium front sight did you use.

 

[guitarded]

Currently carrying a 2.5 bbl, 66-5 stuffed with Hornady 140 gr FTX. But, I just recently bought it so I'm experimenting with different loads.

 

[dirtygrunt95]

dirtygrunt95
Nice 65. What finish is that you used on the stainless? What Tridium front sight did you use.

The finish is a gray duracoat on the frame, everything else is polished and clear coated. The front sight is a tritium shotgun bead. I run 158 grain hydra shocks in it

 

[Cashdog]

Great thread. I don't currently have a K frame, but I've got my eye on a 2.5" 66-2 that I hope to scoop up one day soon. Think it's just the thing to fill the gap between my J frames and my 4" L frames.

Nice looking holster Srigs.

When in the woods, a 3" M 65 with BB Heavy 357 Magnum Ammo - 180 gr. L.F.N. -G.C. (1,400fps/M.E. 783 ft. lbs.) - 20 Round Box. If I have no need for something that heavy, I will go to my M 60 loaded with BB 38 Spl. 158Gr. LHP +P. (1040 fps out of a 2" bbl). Those work for me.

chief38

I've used that 180 gr load on deer with a 7.5" Redhawk. Bet that 65's a handful squeezing those off.