postban
Member
Customized M&P9-CT and M&P9c ~pic heavy~
Doug at BilletFlow did the top and side serrations and Joeywhat at Michigan Gun Owners did the stippling.
...and yeah, full size is about 500rds dirty and only gonna get dirtier.
The serrations are purposeful and give you aggressive purchase on every surface of the slide. You can one-hand rack it on the top of the slide on a pants leg, belt, table edge, pretty much anything. The top serrations match the figure, depth and cut angle of the factory side ones at the rear on a stock slide. The Front slide serrations aid in press checking the gun. I requested those in addition to the top serrations after trying another gun without.
I felt the Melonite was a bit slicker than the tenifer finish on my G19 so it seemed necessary. Doug and he got them just right.
The slide has had the Melonite finish reapplied also by a local refinisher.
Both guns have Dougs drop in sears for reduced pre-travel, pull weight and overtravel. Trigger pulls and resets are just stellar, outstanding feel and control. About 4lbs each and reset distance is now reduced to 1/8".
Joey showed me a few stippling jobs he had done and I asked him for a finer slightly less coarse texture and he pulled it off to perfection.
Aggressive texture but not abrasive. Very even and consistent depths and material displacement while maintaining the curving borders of the grip.
I only wanted the front strap textured so if you want more he can do full coverage too.
Also did some finger placement pads for doing drills and safety while holstering or non-aimed handling. If your finger is not on the trigger, it should be on the pad basically. He also relieved the rear of the trigger guards for a slightly higher grip placement.
Both guns will soon have Heinie LEDGE Straight 8 Night Sights which are on order.
M&P currently had Bowie 10-8 Night Sights and the M&P9c has stock 3-dot.
Both of these things feel great and it is hard to put them down or stop dryfiring at Kyle Buschs tires during the all-star race. Did so just long enough to type this up.
Doug at BilletFlow did the top and side serrations and Joeywhat at Michigan Gun Owners did the stippling.
...and yeah, full size is about 500rds dirty and only gonna get dirtier.
The serrations are purposeful and give you aggressive purchase on every surface of the slide. You can one-hand rack it on the top of the slide on a pants leg, belt, table edge, pretty much anything. The top serrations match the figure, depth and cut angle of the factory side ones at the rear on a stock slide. The Front slide serrations aid in press checking the gun. I requested those in addition to the top serrations after trying another gun without.
I felt the Melonite was a bit slicker than the tenifer finish on my G19 so it seemed necessary. Doug and he got them just right.
The slide has had the Melonite finish reapplied also by a local refinisher.
Both guns have Dougs drop in sears for reduced pre-travel, pull weight and overtravel. Trigger pulls and resets are just stellar, outstanding feel and control. About 4lbs each and reset distance is now reduced to 1/8".
Joey showed me a few stippling jobs he had done and I asked him for a finer slightly less coarse texture and he pulled it off to perfection.
Aggressive texture but not abrasive. Very even and consistent depths and material displacement while maintaining the curving borders of the grip.
I only wanted the front strap textured so if you want more he can do full coverage too.
Also did some finger placement pads for doing drills and safety while holstering or non-aimed handling. If your finger is not on the trigger, it should be on the pad basically. He also relieved the rear of the trigger guards for a slightly higher grip placement.
Both guns will soon have Heinie LEDGE Straight 8 Night Sights which are on order.
M&P currently had Bowie 10-8 Night Sights and the M&P9c has stock 3-dot.
Both of these things feel great and it is hard to put them down or stop dryfiring at Kyle Buschs tires during the all-star race. Did so just long enough to type this up.













