jrplourde
Member
I was pleased measuring the neck expansion portion of the powder funnel at .003-.004 less then bullet diameter. Except for magnum loads, a heavy crimp is not called for I think. Any thoughts?
Bob
Bob
Dillon 550/neck expansion
- Thread starter jrplourde
- Start date
Register to hide this ad
shovelwrench
Member
What caliber?
Seems for hangun, you won't get a lead bullet in the case @.003 less then diameter.
Seems for hangun, you won't get a lead bullet in the case @.003 less then diameter.
OP
jrplourde
Member
Resize
Oh sure. Bell the case a "little" and lead will work fine. What I measured were 9mm and 45 Colt.
Bob
Oh sure. Bell the case a "little" and lead will work fine. What I measured were 9mm and 45 Colt.
Bob
I was having problems with plated bullets from Rannier without just a bit of bell in 45acp.
dillonhelp
Member
On handgun calibers we recommend flaring the case mouth at least .010" larger than a sized, unflared cse measures. This ensures both a consistant powder drop as well as shaving-free bullet seating.
FrankD45
Absent Comrade
When I set up my Dillon, I screw down the powder die until I get full travel on the powder measure, and then add an eighth of a turn. That seems to give me enough bell.
I hope that helps,
Frank
I hope that helps,
Frank
Beans
Member
dillonhelp
Junior Member
Welcome to the forum and I'm glad to see you here
Junior Member
Welcome to the forum and I'm glad to see you here
