Henry Arms revolvers...

[coltle6920]

First off I'm not here to discuss "this vs that". Just thought I'd look into what Henry's line of revolvers looked like. Already have Golden Boy rifles in 22LR and 22WMR and the craftmanship is excellent so I expected no less in their revolvers.

I have to say that my interest dropped quickly when I saw the prices on both the 357 and 22LR. MSRP is $928 for each model. The 22LR model is a 10 shot and actually weighs 2oz more than the .357. The 22LR comes with spare front sights so the shooter can fine tune his accuracy.

I'm sure Henry Arms is still a top notch firearms company but have their reviews gone to their head with pricing? Ten years ago my two Golden boy rifles cost $499 each. They're now up over $700.

I have several guns in 22LR (both revolver and pocket carry) so it isn't like I need another one just for plinking. Maybe I've just been out of the market too long?

 

[BabaBlueJay]

That's what happens with time. I see people on here talk about gun prices back in the 90's/80's or even earlier and I am envious as a millennial. People buying crates of Chinese SKS rifles for 100$ when now just one averages about $600 where I am at. If you feel they are overpriced, I would avoid them. Maybe you can find them used eventually.

 

[Grayfox]

When they were first introduced the Henry revolvers were big news with articles and reviews everywhere. Now there's hardly a word.
Personally, I never cared for them. Just didn't like the looks and the price was way more than I'd give. I've never actually seen one in the flesh or for sale anywhere around me.
I think they turned into a big nothing. Don't be surprised if Henry drops them before long.

 

[CH4]

Checked em out at SHOT. Seemed solid but didn't like the looks. General consensus was luke warm. An answer to a question not asked. Kinda like S&W's lever rifle.

 

[Rustyt1953]

George Carlin once said something to the effect that if you glue any two objects together someone will buy it.

 

[Gunhacker]

Henry sure missed the mark with them, the website says "Your Cowboy Kit, Completed" Uh, no way. My Cowboy kit does not include a DA swing out cylinder. I can't believe there was not a single action... I can buy a Ruger Bearcat for less and it matches up better with a lever gun.

 

[swagmeister]

They are supposed to be well built, but as mentioned in previous posts, they are overpriced and not too attractive. Too many other vintage Smiths and Rugers available to obtain at near the same price or better instead of them.

 

[Model19man]

I bought a Henry .22 rifle from Wal Mart in 2009 for $166 including tax. Their revolvers are pretty funky looking and the prices are crazy. I will keep my wallet in my pocket.

 

[glenwolde]

$499 in 2014 dollars is $660 today so that may be about right. It's the curse of getting old. You see the long-term inflation.

The Python I bought for $350 in 1982 inflates out to $1300 today. That's about right. The minimum wage was $2.30 an hour and I rented a nice apartment for $300. Yes, everything was cheaper but you made a lot less too. I was a young man making $10.00 an hour, which today would be $37.50.

 

[Drm50]

Henry has ace #1 Customer Service. That. Can't be denied. Their rifles are not works of art. They have good barrels and wood. The revolver doesn't look western or American. I'll pass.

 

[Ameshawki]

The 357 models are somewhat common in this market. Street price is usually mid 700 range. I don't think they sell very well. Didn't know they had a 22 model, never seen one.

I've been slightly intrigued by the bird's head grip model but not enough to pay $800. Haven't seen any on the used market yet.

 

[gunbarrel]

LOL...I'm old. I remember pallets loaded with SKS Chinese rifles selling for $59.95

 

[Shrek Of The Arctic]

I've had a passing interest in them, and handled a couple. Last one I handled was pretty smooth and well made, but the crown looked like it was made with a chainsaw file. I think an issue they face in marketing is that they went with an old, vintage type of styling. The caveat being that those who are drawn to that aesthetic still have a broad selection of Smiths, Colts, and perhaps even Rugers available at the same price range.

I'd still buy one for the right price, just because they're a bit different,and I think they may become an oddity in the future. That having been said, feel that I can totally see why it wouldn't be a hot seller.

 

[Drm50]

LOL...I'm old. I remember pallets loaded with SKS Chinese rifles selling for $59.95

I'm older, I remember every other page in Shotgun News had Mosins for 3/$99.

 

[Shrek Of The Arctic]

All them "******" old Enfields, Arisakas, K-31s, M-39s...

Police turn in Model 10s for $110 each...sigh...

If only I had today's paycheck back then. Of course..I was just another kid in the 80's, so...there is that...

 

[bobsguns]

The price of steel has gone up exponentially over the years. Priced any Snap-On tools lately?

Hopefully, after the election prices will come down.

 

[gunbarrel]

But, what about the Snap-on tool *calendar*!? That's critical!!

 

[Model19man]

LOL...I'm old. I remember pallets loaded with SKS Chinese rifles selling for $59.95

I bought an SKS in 1988 for $79 including a bandolier and 1000 rounds of chinese ammunition. I sold the same rifle last year for $580 with 800 rounds of the same ammo. I thought I did pretty good.

 

[kaaskop49]

I like it, but it's the wrong gun at the wrong time. In 1970 or so, the 4" .357, especially the Python and Model 19, were the primo guns that permit holders coveted in the NYC region. Not no more, Billy. This gun would appeal to an older crowd like myself, but we already have the 4" .357s that we like. Also, some of us are thinning out our 'inventory' and are not in the market for another service-size .357. It is sad, IMO. I'd really like to handle one. I know the Imperatos from NYC and they offer quality products.

Now if they were to offer a 2"!... (You know me!)

Kaaskop49
Shield #5103

 

[8shot]

Might those Henry D/A revolvers would look better with a underlug barrel?

 

[Muley Gil]

Might those Henry D/A revolvers would look better with a underlug barrel?

No! There are too many overly heavy revolvers out there already.

 

[CH4]

Might those Henry D/A revolvers would look better with a underlug barrel?

The only thing that'll make a Henry revolver look better is when it is sitting in a holster. Anyone make holsters for it?

 

[BabaBlueJay]

George Carlin once said something to the effect that if you glue any two objects together someone will buy it.

Hey now, we have a lot of re-loaders here that would be happy to pay for the privilege of putting those objects together themselves.

 

[The Norseman]

Oh Henry

I like the Henry Revolvers. The ones I've
seen and inspected were well made; fit
and finish well done.

I eventually get one when they become
reasonably priced.

 

[Mike SC Hunter]

H revolvers are so UGLY they should be free prizes in Cracker Jack Boxes.

 

[GypsmJim]

I'm older, I remember every other page in Shotgun News had Mosins for 3/$99.

I paid 30 bucks to get an 03FFL and with that I bought Mosins for $29 with free shipping. It also included a bayonet and a leather ammo pouch.

If you wanted to take a chance with their u-fix-ems I bought a few at $16 out the door. They all shot well and rarely were missing more than a couple of screws.

 

[inspcalahan]

I found one about a year ago for around $750 and said what the heck. I'm a huge Henry fan with most of their long gun offerings and have hunted with them all from .22 to .45-70 for many years. I said why not... it's the "Gunfighter" standard grip. I don't like the Birdshead style anyway.

I found it to be one of the nicest shooting .357's I own, in regards to a gun I'd actually carry outdoors, in the woods, in the weather, fishing, driving the tractor, etc. It's no Python or Match Target anything. It's easily equal to an off the shelf 686, King Cobra, etc though. I'm not talking fit and finish. I'm talking trigger pull, good sight picture (extra front site included to adjust with your loads as needed), accuracy, etc.

I put a set of checkered stocks on it for more grip traction, as the smooth wood was slick for a woods gun where I may be wearing gloves.

The brass frame kinda grew on me the more I handled it. Maybe a little additional weight is why it feels good shooting, even with hot loads. There's a takedown button on the front of the trigger guard that releases the entire cylinder/crane assemble out the front without having to take out screws and is a very nice feature for cleaning.

Overall, I'm pleased with mine. Many don't like the looks. I get that. It's different for sure. The role this one fills is a working tool, that's enjoyable to use.

I only recently learned about the 10 shot .22 but for now, don't think I'll be going after one. My 10 shot Colt King Cobra .22 has become my favorite for that role.

If you're on the Colt Forum, you can find a lengthy review I did of the Henry .357 complete with pictures.