Installed "JP" Springs...

[HAWKEYE10]

I installed the JP 3.5 springs and went to the range. "WOW" what a difference. The factory trigger was horrible, but I think I can live with this. Is it as good as I would like? "NO" But I can live with it. Has there been any other success stories with JP springs? Don

 

[KaiDoi]

I installed the JP yellow springs in my 15-22 prior to my first range session. So, I do not know the difference. I have an extra Geissele SSA 2 stage trigger in the parts bin. For laughs and fun, I might put that assembly in my 15-22.

 

[ChattanoogaPhil]

I installed the JP 3.5 springs and went to the range. "WOW" what a difference. The factory trigger was horrible, but I think I can live with this. Is it as good as I would like? "NO" But I can live with it. Has there been any other success stories with JP springs? Don

http://smith-wessonforum.com/smith-wesson-m-p-15-22/133659-jp-spring-kit.html?highlight=spring

http://smith-wessonforum.com/smith-wesson-m-p-15-22/134293-1-jp-spring-kit.html?highlight=spring

 

[BeginingOfTheEnd]

I didn't mind the factory trigger but won't go back after experiencing the jp system

 

[HAWKEYE10]

I didn't mind the factory trigger but won't go back after experiencing the jp system

My trigger was so bad I had to do something. I might have just got a bad one. A friend of mine is like you and says his trigger feels good. Don

 

[rhassick1]

I installed the JP springs and like them as well. The factory springs made it hard for my young son to pull the trigger. The new ones lighten the trigger pull enough to make it more fun to shot. They also helped with some problems I was having with FTE. The lighter hammer spring lets the bolt cycle easier.

 

[Timman]

I installed the JP springs and spent a lot of time polishing the sear points with a dremel and jewelers rouge. I don’t have a scale, but I estimate the pull was reduced by near half. I believe the polishing of the sear points is essential to achieve the maximum potential of the kit.

 

[cpprpythn1]

I love the JP spring kit in mine. Lighter pull of course and took away that annoying notch feel just before the trigger break.

 

[stevegartx]

JP Springs

I just installed my JP springs the {3.5 pound} & took Belt Fed advise with the rubbing compound on sear surfaces . Its amazing how much it it helps the trigger pull . Love it . If you haven't done this yet . You need to try it . Or try some one else M &P that has been performed on . I 'm saving my stock springs , but I don't see me going back to them .

 

[boltman]

I actually never shot my 15-22 with factory springs before. I changed them out with the JP spring kit before my first rounds with the rifle. I am going back out tomorrow and shoot some more federal 550 value pack and some cci velocitors. I haven't had any ftf's or fte's so far.

I don't think anyone would look back at their factory spring setup after installing the JP spring kit.

The spring kit is absolutely noticeable compared to the factory springs. Good value for 9.95. I got mine at Brownell's awhile back and I believe they delivered it within 3 days.

 

[kilo6echo]

Man, I have been telling myself for months that I need to just pull the trigger on that jp kit. I hear nothing but good news on this ten dollar kit.

 

[BELT_FED]

Man, I have been telling myself for months that I need to just pull the trigger on that jp kit. I hear nothing but good news on this ten dollar kit.

jump.. it will be the best 10 bucks you spend