K32 first year of manufacture

[Aussie Collector]

Many sources state the k32 was first manufactured in 1946.
The SCS&W 4th states..
Manufactured circa 1946-1974
I have a Smith & Wesson all model circular from 1946/47, prices effective Oct 5 1946.
The anticipated production schedule states that the K32 should be shipped in small lots early in 1948.

Is this 1946 date referring to a prototype as it looks to me production started some time in 1947 or the first one possible completed in 1948 if shipping started early in 1948.

What's is the earliest shipped k32 date out there?

 

[bower]

I thought there were a limited number manufactured pre war.

 

[JP@AK]

The first production K-32 Masterpiece revolvers were assembled at the very end of December, 1948. The earliest shipment dates I find were in March, 1949, with one possibly shipped in February. That said, I do show one K-32, apparently a prototype, that shipped to E. F. Warner, Publisher of Field & Stream magazine, in March, 1948.

 

[bullmack]

The first production K-32 Masterpiece revolvers were assembled at the very end of December, 1948. The earliest shipment dates I find were in March, 1949, with one possibly shipped in February. That said, I do show one K-32, apparently a prototype, that shipped to E. F. Warner, Publisher of Field & Stream magazine, in March, 1948.

I own the K-32 you are referring to. It did ship to Warner on 3/10/1948. It was not a prototype. In its letter Roy states that the first K-32 shipped on July 22, 1947. There's an extensive post about my K-32 that I'll find the link to.

 

[22hipower]

There was also a pre-K32 First Model described as "Special Early Production" in S&W letters. Some 94 of them produced between 1936 and 1941. Billed as an "M&P Target 38 Special chambered in 32 Long S&W." The letter says this is how this model was marked at shipment until 1938 when they were first called K32s.

Jeff
SWCA #1457

 

[bullmack]

My thread reply was in regard to post-war K-32's.

 

[JSR III]

Not necessarily the case with the K32's however, using the .22/32 HFT's as an example, the first shipments were in 1911 however it supposedly did not officially go into production and appear in the catalogs until 1915. (I have not checked my catalogs to verify this as due to a remodel they are buried)

The other possibility was that S&W discussed or even advertised this model prior to the first run merely to build anticipation and therefore sales.

Remember with S&W it was always about the $$$$$ first.

 

[rct269]

Well, to pick the nit between a K-32 (.) and a K-32 Masterpiece, my K-32 1st Model (#681819) was shipped March 25, 1940.

My first K-32 Masterpiece (2nd Model K-32?) #K58970 was shipped March 24, 1949.

My second K-32 Masterpiece (3rd Model K-32?) #K232389 was shipped December 12, 1955.

I reckon that's the end of the K-32 Masterpieces, per se, to be followed by Post Masterpieces, perhaps better known as Model Numberpieces. I didn't have any of those, preferring items with some semblance of soul---or creativity----or style----or pretty much anything besides numbers.

Ralph Tremaine

And as an aside of dubious value, my letter on the 1st Model simply states "These early K-32's are officially known as the K-32 First Model. " I reckon they felt that was necessary after whatever all that gobbledygook Jeff was talking about what the early letters were saying.

As another aside of dubious value, my "2nd Model K-32?" was a narrow rib version with the funky finish ("Satin Blue")---the 3rd Model being a wide rib, bright blue.

 

[JP@AK]

In its letter Roy states that the first K-32 shipped on July 22, 1947.

Yes. Unquestionably there were a few early examples assembled. But Roy has also informed us that actual production did not begin until December 29, 1948.

 

[22hipower]

Yes. Unquestionably there were a few early examples assembled. But Roy has also informed us that actual production did not begin until December 29, 1948.

I understand I think, but Roy's letter from 2005 is fairly clear on when he thought the first K32s were produced and that those were indeed K32s. I wouldn't know one way or another had I not recently stumbled on one for sale with the letter. Just more S&W trivia, but interesting trivia. The letter shown here is not mine.

Jeff
SWCA #1457


https://flic.kr/p/2pKdZQV https://www.flickr.com/photos/194934231@N03/

 

[bdGreen]

This post needs a picture or two.

K-32 6", blue K237377 **October 1956**

Enjoy,
bdGreen

Tap on image to enlarge.

 

[JP@AK]

I understand I think, but Roy's letter from 2005 is fairly clear on when he thought the first K32s were produced and that those were indeed K32s. I wouldn't know one way or another had I not recently stumbled on one for sale with the letter. Just more S&W trivia, but interesting trivia. The letter shown here is not mine.

Jeff
SWCA #1457

Yes. My comments, consistent with the question originally asked in this tread, was in reference to the postwar K-32 Masterpiece. Hence, my comments were not applicable to anything S&W did prior to WWII.

Good info here though. Thanks.

 

[Green Frog]

In the best of all worlds where I would have unlimited funds and total worldwide search function, I would purchase a 1949 vintage tapered barrel, narrow rib K32 to go with my 1948 vintage K22 & K38. Alas, I don't live in such a world so this individual gun must elude me.

"A man's reach must needs exceed his grasp, else what's Heaven for?"

Froggie
PS I was born in 1949, so conceived in 1948, so those years hold special significance for me.

 

[Aussie Collector]

Interesting...

K32 manufacturing did start in 1948 with the first one possibly completed in 1949.
The key Id feature here being a "K" in the serial number.

so possibly the K-32 Hand Ejector First Model. Should be called "32 Hand Ejector First Model (pre K32)" or "32 Hand Ejector Target (pre K32)" made from 1938 to 1940.
Id being no "K" in the serial number.

 

[Muley Gil]

I recall a few posts concerning .32 Long revolvers being built and numbered in the .32-20 serial number range. Were any of those target models?

 

[mikepriwer]

Gil

First, a couple of comments. When it comes to chambering an early K-frame revolver in 32 long, the 32-20 serial number series should have been the choice, because 32-20 and 32 long are exactly the same size. The only difference is in the cylinder chambering.

In fact, the 1st K-frames chambered in 32 long were in the 32-20 serial number series, and were a built at least as early as 1910. They were done in very small groups (10-20 guns) and were categorized as special orders. Some had target sights, and others were fixed M&P sights, in various barrel lengths.

In the later 1930's, a much larger group were produced, and serial numbered in the 38 serial number series. This group is more well-known to the collecting community. After WW2, the 32-long K-frames were advertised as K-32's.

It's worth noting that, regardless of the serial number series, all these guns are the same: K-frames chambered in 32-long.

Having said all of that, here are two consecutively-numbered early target K-frames chambered in 32-long. They were numbered in the 32-20 series, and are serial numbers 43133 and 43134. They were built and shipped in 1910 to two St Louis shooters of the period. They letter as I have described.

Regards, Mike Priwer

 

[22hipower]

Interesting...

K32 manufacturing did start in 1948 with the first one possibly completed in 1949.
The key Id feature here being a "K" in the serial number.

so possibly the K-32 Hand Ejector First Model. Should be called "32 Hand Ejector First Model (pre K32)" or "32 Hand Ejector Target (pre K32)" made from 1938 to 1940.
Id being no "K" in the serial number.

Maybe, seems like a pre-war post-war differentiation works. Usually the collector community accepts whatever the S&W Letter says versus what any of us think it should say though. As to the K not being in the serial number, true enough, but also true that it is a K frame so calling it a K-32 seems appropriate too. Since the letter calls those 94 pre-war 32 targets First Model K-32s I think it's hard to argue that they are not.

Jeff
SWCA #1457

 

[Aussie Collector]

It would be really interesting to know if the non K serial number ones were actually called K32 by the factory. Do we know what was on the factory invoices for these earlier pre war 32s?

Edit...I like the term pre-war and post-war. Possibly put this into the standard catalogue of Smith & Wesson 5th...

 

[Aussie Collector]

Many sources state the k32 was first manufactured in 1946.
The SCS&W 4th states..
Manufactured circa 1946-1974
I have a Smith & Wesson all model circular from 1946/47, prices effective Oct 5 1946.
The anticipated production schedule states that the K32 should be shipped in small lots early in 1948.

My first post was eluding to the start manufacturing date of the post war being incorrect. 2 or 3 years out..
From the other posts above the date should be 1948 or 1949 to 1974......

 

[Muley Gil]

Gil

First, a couple of comments. When it comes to chambering an early K-frame revolver in 32 long, the 32-20 serial number series should have been the choice, because 32-20 and 32 long are exactly the same size. The only difference is in the cylinder chambering.

In fact, the 1st K-frames chambered in 32 long were in the 32-20 serial number series, and were a built at least as early as 1910. They were done in very small groups (10-20 guns) and were categorized as special orders. Some had target sights, and others were fixed M&P sights, in various barrel lengths.

In the later 1930's, a much larger group were produced, and serial numbered in the 38 serial number series. This group is more well-known to the collecting community. After WW2, the 32-long K-frames were advertised as K-32's.

It's worth noting that, regardless of the serial number series, all these guns are the same: K-frames chambered in 32-long.

Having said all of that, here are two consecutively-numbered early target K-frames chambered in 32-long. They were numbered in the 32-20 series, and are serial numbers 43133 and 43134. They were built and shipped in 1910 to two St Louis shooters of the period. They letter as I have described.

Regards, Mike Priwer

Thanks Mike.

That's what I remember reading here on the Forum, but it had been a few years back & I didn't want to spew bad info.