Let's See Those Dirty Guns!

Joined
Jan 25, 2010
Messages
6,421
Reaction score
8,165
Location
The wet side of Oregon
OK, enough already with those perfectly preserved safe queens all shined up with Renaissance Wax.

Time for some revolvers that get dirty - often. They work and work hard.

I will lead off with this one. Just back from the range. 400 practice rounds today through this 625.
My other 625 has open sights and gets used just as hard.

dirty.jpg
 
Last edited:
Register to hide this ad


Model 19-6 After 3 days of the phase II portion of the Oklahoma LE Academy's (CLEET) firearms instructor course. Over a thousand rounds in 3 days.

Dang that is dirty. 2 weeks ago I took the Chapman Academy Intro again with a revolver. 600 rounds in one day. My Ron Powers custom 686 looked like yours. 2 years ago I took the Chapman Academy Advanced with my then new DW VBOB. Put 500 rounds through it to break it in. Then another 1,500 rounds through it for the 3 day class. Never cleaned it for a torture test. No malfunctions. Sure was dirty. No pics. Complete strip & clean.
 
I should have read your post earlier today because I JUST finished cleaning my Colt Gold Cup 1911 which was rather dirty due to a 3 hour stint at the Range this afternoon. Unlike revolvers the Autos tend to look cleaner on the outside but get really yukky inside. I shoot 230 grain RNL re-loads in mine and the wax they put in the groove burns a bit dirty. Two out of the three Ranges I belong to do NOT allow the use of jacketed ammo indoors.
 
Dang that is dirty. 2 weeks ago I took the Chapman Academy Intro again with a revolver. 600 rounds in one day. My Ron Powers custom 686 looked like yours. 2 years ago I took the Chapman Academy Advanced with my then new DW VBOB. Put 500 rounds through it to break it in. Then another 1,500 rounds through it for the 3 day class. Never cleaned it for a torture test. No malfunctions. Sure was dirty. No pics. Complete strip & clean.

Lead cast bullets, Lee liquid lube and Unique powder. Very dirty load but I've been using unique for 30 years and have good loads worked up for all of my pistols. I've standardized on it and see no reason to change. I buy one powder for all my pistols.
 
Last edited:
From the last IHMSA match:

DSC03008_zps9dbb465c.jpg

625 PP

DSC03013_zpsa747a180.jpg

A couple of hundred rounds of cast and swaged bullets since the last wipe down and this is all it could manage, sorry!

Not all that bad, as far as I'm concerned, but haven't anything else recent. Usual dirty revolver champ is the 4" 617, but it hasn't been sucking down bricks of ammo for a while!
 
Last edited:
Dirty gun

Usually I do not take photos of my guns when they aren't cleaned. There is only one photo that I have of a "dirty" revolver.

It is to prove that I am not merely a collector but shooter of Korth revolvers and appreciate their performance more than looks and quality. The thought of having a fine firearm and not shooting it, is lost on me.

DSCF7503_zpsfbbb9440.jpg
 

Latest posts

Back
Top