Lipsey's considering a special run of .327 Fed rifles

[MNruss]

I'm in

I'm up for almost any kind.
My Marlin 1894CB is awful heavy, to the point I may soon sell it, but the 327 is a whole different critter & I'll be interested in what they come up with.
I did find a 18" T/C Contender barrel from the 2009 TCA run, & it'll chamber a 160 grain cast boolit (311291hp) but I haven't tried to see what I could get out of it for velocity.

Regards

Russ

 

[Tom K]

I would love to have a Model 16 .327 Mag, but I'd want it with a clone of the 8-3/8" Model 53 barrel. No need for a heavy underlug, might as well put that extra weight into length for more sight radius. And fine sights for varmint shooting. For that matter would love to see a twin in 17 HMR.
....

Kinda like this? The ejector rod isn't enclosed as on a Model 53 but other than that it's about what you describe.

http://smith-wessonforum.com/s-w-revolvers-1961-1980/472728-seldom-seen-8-3-8-k32.html

http://smith-wessonforum.com/s-w-re...e-session-8-3-8-327-44-spl.html#post139111771

 

[5-Shot]

As the OP suggested, I emailed Lipsey's to give them the thumbs up. In addition, I shamelessly begged for a high wall in 327. To my delight and surprise they responded that they were already talking to Winchester about a low wall. Life is indeed good. My very favorite rifle is my Browning Traditional Hunter in 30-30.

Ed

 

[peyton]

5-Shot, that is good news indeed, I kept looking at the older single shot rifles wondering any could be converted. I have a T/C Encore in 300 blackout and I investigated getting another barrel. I did not do it yet.

 

[bummer]

single shot low wall or a rolling block

 

[les.b]

Likely to appeal to folks in states with "straight wall only" law for deer hunting.

Probably makes enough energy to be legal.

I learn something here every day. I know that some states like Ohio only allow shotguns, and some states have minimum calibers, but have never heard of "straight wall only" does that mean something like a 45-70, or a .45 Colt??? And what is the rationale?

Best Regards, Les

 

[peh_7]

Henry in 327 Federal

I was communicating with Henry on this subject back in March (2016) and received an short email, on the 17th, from Anthony Imperato the President, where he stated "We are studying the 327 as we speak." Interested enthusiasts might want to drop him an email to help push things along. IMHO a Big Boy Steel would be optimal.

 

[les.b]

I have always admired that company, the rifles they produce, and their philosophy: "Made in America, or we won't make it at all"!!! I would be interested in such a gun, even though I don't have the pistol yet. But I would be reloading for it, and I am always looking for new horizons!!!

Best Regards, Les

 

[damienph]

At this point, as long as it's weak enough, I'm sure any caliber would qualify for CAS.

Those guys aren't interested in real history.

Maybe not, but they are interested in shooting guns and having a little fun while doing it.

 

[Drm50]

There has been a need for a field gun in 25 to 32 calibre range
for a while. Gun companies have not be invested in turning out
useful field guns for some time. They have been catering to
Para military and "game" guns ( not game as in hunting ). There
is a niche for a small cf cartridge. Right now you have the choice
of a HV 22 or 357. A lot of time cartridges of this power are not
required for the job. In the area I live 25/20 & 32/20 guns have
always been in demand. Now due to ammo situation they aren't
being used as much. They took care of most needs around the
farm and woods here in the east. I think a 327 rifle that was
capable of firing 32H&R and 32 long would be well accepted. A
lot of us like to shot things that don't come down in pieces, tore
up so bad you wasted the animal, Muzzel blast that scares every
thing for a mile, ect. There should also be reasonably priced
Lead bullet loads, you can get lead 38s $8-$10. With the price
of 22lr in same neighborhood it could really take off.

 

[indigo22]

A .357mag bolt gun has been on my want list for a while. If it actually happens a .327mag might fill that spot. Hopefully it may also spur the ammo industry into looking at what will fill the nitch for hunters/plinkers. I know that hunters are using the 22Lr's for mid sized game but a mid sized cartridge would do better without over extending.

 

[jtcarm]

They outta bring back the #3, that'd be a great platform (though I'd want something besides a .327).

Is Ruger ever going to figure out no matter how long you make a .32, it's just not gonna sell? Maybe the .327 Norma Ultra-Mag is next.

 

[stonehorses]

Reply from Henry's Anthony Imperato to Mr. Stonehorses

From: Anthony Imperato <[email protected]>
Date: June 29, 2016 at 6:53:33 AM EDT
Subject: Re: Customer search for

Thank you for your interest in buying a Henry. We are looking at the 327 as we speak. We will keep you posted.

On Jun 24, 2016 9:40 PM,
<[email protected]> wrote:
Notes: I am looking for a lever action chambered in 327 federal mag. If you made one you'd be the first like Chevy did with the midsize truck. Everyone else would follow. Ok maybe not a good comparison but I think you get the idea, right? With Marlin not being the same as years ago I believe you would make them right and at a good price too. What do you think? Thanks.
Source: Henryrifles.com
Interactology Webmaster

 

[Jebus35745]

I like the single shot idea in a low wall would be great. Actually having a T/C barrel made from Bullbury or MGM would satisfy my itch and be somewhat cheaper. A short heavy barrel contender rifle would be neat. Shootin at 200 yards at bowling pins would be fun. Could save a few bucks to spend on other things I don't need but buy anyway. Love the .32 caliber. Larry