Looking for DOB & value of 32 cal.
- Thread starter lago
- Start date
Register to hide this ad
Model19man
Member
I think you have a .32 Hand Ejector, third model. It was made some time between about 1927 - 37, perhaps someone else can guess closer. You would need a factory letter to be sure. In any case value is low, probably about $200 if it is functional. A good night stand gun if it shoots OK. Here's a reference:
Standard Catalog of Smith & Wesson - Jim Supica, Richard Nahas - Google Books
Standard Catalog of Smith & Wesson - Jim Supica, Richard Nahas - Google Books
Serial numbers in the 400000 range for these small frame revolvers began coming off the assembly floor in 1924. Because the company did not ship in strict serial number order, that gun may date to 1925.
That's a 3.25 inch barrel, one of the standard lengths for this model. Other barrels were 4.25 and 6 inches.
You can deal with the surface rust with some fine bronze wool and oil. (Superfine steel wool will do in a pinch, but don't really grind away at the rust; light pressure and repeated strokes are best.)
Gun prices vary around the country on a regional basis. Depending on where you live, that could be a $200 to $300 gun.
That's a 3.25 inch barrel, one of the standard lengths for this model. Other barrels were 4.25 and 6 inches.
You can deal with the surface rust with some fine bronze wool and oil. (Superfine steel wool will do in a pinch, but don't really grind away at the rust; light pressure and repeated strokes are best.)
Gun prices vary around the country on a regional basis. Depending on where you live, that could be a $200 to $300 gun.
