MustangSally
Member
- Joined
- Sep 24, 2009
- Messages
- 32
- Reaction score
- 0
Can I have some suggestions for a low recoil load using 147 gr bullets. Thanks
Low Recoil Load
- Thread starter MustangSally
- Start date
Register to hide this ad
Cartridge Loads - Hodgdon Reloading Data Center - data.hodgdon.com
147 GR. FMJ Winchester WSF .355" 1.169" 3.9 895 28,400 PSI 4.3 950 32,300 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP Hodgdon Longshot .355" 1.100" 3.8 851 25,700 PSI 4.7 1004 33,800 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP IMR 800-X .355" 1.100" 3.5 808 25,600 PSI 4.0 883 28,900 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP IMR SR 4756 .355" 1.100" 3.0 668 21,800 PSI 3.6 834 29,900 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP Hodgdon HS-6 .355" 1.100" 4.3 773 20,200 CUP 5.0 885 27,900 CUP [ Edit ] [ Delete ] 147 GR. HDY XTP Winchester AutoComp .355" 1.100" 3.6 827 27,900 PSI 4.0 916 32,800 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP Hodgdon Universal .355" 1.100" 3.0 803 24,100 CUP 3.3 869 31,000 CUP [ Edit ] [ Delete ] 147 GR. HDY XTP IMR SR 7625 .355" 1.100" 2.8 707 24,000 PSI 3.3 844 32,900 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP Hodgdon Titegroup .355" 1.100" 3.2 855 22,500 CUP 3.6 929 27,500 CUP [ Edit ] [ Delete ] 147 GR. HDY XTP IMR 700-X .355" 1.100" 2.6 764 27,300 PSI 2.9 838 32,000 PSI [ Edit ] [ Delete ] 147 GR. JHP Winchester WSF .355" 1.169" 4.0 900 30,100 PSI 4.3 935 32,300 PSI [ Edit ] [ Delete ] 147 GR. LEAD CFP Winchester WSF .355" 1.169" 3.7 905 28,500 PSI 4.1 965 32,800 PSI [ Edit ] [ Delete ] Any of these starter loads will be light recoil, but they also may be too light to work the slide. Do not go over MAX.
147 GR. FMJ Winchester WSF .355" 1.169" 3.9 895 28,400 PSI 4.3 950 32,300 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP Hodgdon Longshot .355" 1.100" 3.8 851 25,700 PSI 4.7 1004 33,800 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP IMR 800-X .355" 1.100" 3.5 808 25,600 PSI 4.0 883 28,900 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP IMR SR 4756 .355" 1.100" 3.0 668 21,800 PSI 3.6 834 29,900 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP Hodgdon HS-6 .355" 1.100" 4.3 773 20,200 CUP 5.0 885 27,900 CUP [ Edit ] [ Delete ] 147 GR. HDY XTP Winchester AutoComp .355" 1.100" 3.6 827 27,900 PSI 4.0 916 32,800 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP Hodgdon Universal .355" 1.100" 3.0 803 24,100 CUP 3.3 869 31,000 CUP [ Edit ] [ Delete ] 147 GR. HDY XTP IMR SR 7625 .355" 1.100" 2.8 707 24,000 PSI 3.3 844 32,900 PSI [ Edit ] [ Delete ] 147 GR. HDY XTP Hodgdon Titegroup .355" 1.100" 3.2 855 22,500 CUP 3.6 929 27,500 CUP [ Edit ] [ Delete ] 147 GR. HDY XTP IMR 700-X .355" 1.100" 2.6 764 27,300 PSI 2.9 838 32,000 PSI [ Edit ] [ Delete ] 147 GR. JHP Winchester WSF .355" 1.169" 4.0 900 30,100 PSI 4.3 935 32,300 PSI [ Edit ] [ Delete ] 147 GR. LEAD CFP Winchester WSF .355" 1.169" 3.7 905 28,500 PSI 4.1 965 32,800 PSI [ Edit ] [ Delete ] Any of these starter loads will be light recoil, but they also may be too light to work the slide. Do not go over MAX.
264BORESTEVE
Member
I've used the max load of Titegroup OKFC05 listed above for a few years now. If you notice, this is still way below saami standard and very economical. Just be mindful of your overall length and be sure to have a good crimp to avoid bullet setback as pressures with this powder could rise to an unsafe level in a hurry if that bullet is too far into the case! Anyway, just wanted let ya know that it has worked great for me. Be safe-have fun.
blkpitbull
Member
- Joined
- May 2, 2011
- Messages
- 292
- Reaction score
- 68
I use the 135g federal hydroshok's, light recoil defense....
Federal Premium - Handgun Details
read!!!
Federal Premium - Handgun Details
read!!!
fred5876r
Member
I assume your inquiry concerns 9mm. My normal match load, 3.2 Titegroup, gives me 130-135 PF in several 5" guns. I use 3.0 with 147 plated bullets at an indoor range for casual plinking.
