M&P 15-22 ejector

jaynew

Member
Joined
Feb 2, 2022
Messages
5
Reaction score
4
Location
PA.
New member, have a question on the 15-22. About 400 or so rounds through it, runs fine, but have tried rapid fire a couple times and the spent brass stove pipes after 3 or 4 rounds.I use CCI mini mags high velocity. Is there a break in period or do you recommend replacing with a better extractor now? Thanks.
 
Register to hide this ad
Volquartsen makes an improved extractor that is a good upgrade. The ejector probably needs adjustment, most do out of the box. The ejector needs to be almost rubbing the bottom of the bolt and the center rib. If it does rub, it can slow the bolt enough to cause misfeeds so there needs to be a couple of thousandths clearance in both directions.
 
Thanks. I ordered to V extractor. Will keep an eye on the ejector.
 
Same experience here . Several FTEs and stove pipes right out of the box . Swapped the extractor with the Volquartsen extractor and ran 150 rounds , ZERO issues....
 
Volquartsen makes an improved extractor that is a good upgrade. The ejector probably needs adjustment, most do out of the box. The ejector needs to be almost rubbing the bottom of the bolt and the center rib. If it does rub, it can slow the bolt enough to cause misfeeds so there needs to be a couple of thousandths clearance in both directions.
I have the Volquartsen extractor on order. Agree with the adjustment on the ejector.
 
I now have the Volquartsen extractor. Easy install and it works great. Excellent upgrade.
 
Back
Top