M&P 15-22 FTF

[CZU]

I've had this one for a couple months and just got around to trying it out yesterday. Ejection is fine, could the FTF be caused because I was using CCI Quite 22? Maybe the action is cycling enough to eject but not quite enough to strip the next round from the magazine. They do feed fine manually cycling with the charging handle. Also, would this be considered a first gen with the sights that it has? Here is a pic with a 30 cal can attached.

 

[cjt50]

The ammo is your problem and you have a 1st gen rifle.

CCI quiets will not fully cycle any semi-auto without modification. Really not worth the trouble. CCI standard velocity is fairly quiet out of the 15-22 and will fully cycle the action reliably. With a suppressor the only thing you really hear is the action noise.

 

[CZU]

The ammo is your problem and you have a 1st gen rifle.

CCI quiets will not fully cycle any semi-auto without modification. Really not worth the trouble. CCI standard velocity is fairly quiet out of the 15-22 and will fully cycle the action reliably. With a suppressor the only thing you really hear is the action noise.

Thank you cjt50!

 

[fff92y]

The ammo is your problem and you have a 1st gen rifle.

CCI quiets will not fully cycle any semi-auto without modification. Really not worth the trouble. CCI standard velocity is fairly quiet out of the 15-22 and will fully cycle the action reliably. With a suppressor the only thing you really hear is the action noise.

Ya most quiet subsonic ammo info even says not for semi auto's as it may not cycle properly.