I have one on order (AIWB version). I have a similarly made holster from Rocketman Holsters (rmholsters.com) for another gun, and have never had any problem with clip breakage.
Last edited:
M&P Shield holsters and accessories?
- Thread starter Tommato
- Start date
I have one on order (AIWB version). I have a similarly made holster from Rocketman Holsters (rmholsters.com) for another gun, and have never had any problem with clip breakage.
I have a Skeleton holster and mag carrier on the way from PHLster.
M&P Shield Custom Kydex! - YouTube
M&P Shield Custom Kydex! - YouTube
I went ahead and ordered one along with a mag carrier. Paul says that breakage is extremely rare and that he'll replace if broken. Will review when it comes in.
Good deal. Glad to hear he stands by his products and will take care of you if there are any problems.
K1500
Member
Comp Tac is also making stuff for the Shield.
I ordered mine Sunday morning (4/22) and paid on-line using Paypal.
It was in my mailbox this afternoon (4/24).
It's a simple, molded IWB option.
DavidC77
Member
Ha, you beat me to it Justin, I saw that you guys are listing the holsters for the Shields already.
I've told the folks over on the other forum that I am on all the time to try you guys.
Plus 1 to anyone here thinking of a High Noon Holster.
High Noon makes great stuff, I have their holsters and their Rock Steady Belt, best set up I have ever worn...............
kris7047th
Member
- Joined
- Aug 28, 2010
- Messages
- 520
- Reaction score
- 103
For the time being until RCS has specific holster for the Shield. I bought a Galco IWB (Natural) Glock 26. Stamped on the back is G119L .. STO286
Aahzz
Member
I have the Kydex OWB on order from RKBA holsters. Can't wait to get it. Going mildly nuts waiting, but I'm not complaining, because it's worth waiting for quality handmade gear, and the 2-4 weeks stated on the website is more than reasonable. A week and a half down, just a little while longer.....
For the time being until RCS has specific holster for the Shield. I bought a Galco IWB (Natural) Glock 26. Stamped on the back is G119L .. STO286
How is that working for you??
I have one that a friend gave me... it has been in the bag for sometime now (did not have a gun for it)... new, never used... if it works for the Shield I might use it until I get one from High Noon Holsters
kris7047th
Member
- Joined
- Aug 28, 2010
- Messages
- 520
- Reaction score
- 103
Quite comfortable. I tried other Galcos. The black leather (much more expensive) was too bulky. No way will I bother with a Serpa. Try it out.
High Noon Holsters
Member
yanici
US Veteran
I've heard that the MA compliant shield may have a popup loaded chamber indicator similar to some Rugers. Would there be a special holster for these guns?
Last edited:
Justin, thank you for letting me know. Not a problem.
kris7047th
Member
- Joined
- Aug 28, 2010
- Messages
- 520
- Reaction score
- 103
There is no pop up chamber indicator on the Shield.
Wrong. Check your manual. pg 15, figure 13b.
The Remora model# is "4B". I have one on the way: RFT and SS.
Its not on their web page yet. You have to call to order.
kris7047th
Member
- Joined
- Aug 28, 2010
- Messages
- 520
- Reaction score
- 103
The manual says *some* have that pop up indicator. Mine does not have one. Could this be a state safety requirement .. like California?
Last edited:
I have one for my Kahr CM9 with a mag pouch. I was suprised that it works just fine for my new Shield! Stoked! I may have to order this one if it's the "correct" holster.
motorcityfred
Member
I just got my new holster for my shield a galco ultimate second amendment 286 for a glock 26, I love this holster I had one for my kahr cm9, just sold the kahr today
I just received my holster from pjholsters, and I am very pleased. It is a perfect fit with no adjustment required (although it does have an adjusting screw) and is very nicely made. I also bought a mag carrier at the same time. It is a very nice product as well.
Fast service, good price and quality workmanship! I can't think of anything else to want.
BlueBridge
Member
I received mine today as well! I have holsters from him for other pistols too. So far they are my favorite IWB holster and I find them to be very comfortable. Not to mention he is quick to answer questions and will work with you on customization.
I was perusing this forum thread tonight because I'm picking up my new M&P Shield this week and would like to find a good holster for it. I saw the pics posted of the High Noon Holster and can tell by the photos that this is a very well made holster. As a professional leather worker with over 15 years experience I can see the quality involved and wanted to comment about it. The work I do is entirely different from holster manufacturing so I know not to try to make my own rig. I'm not going to say negative things about other manufacturers but I will say that the detail in the High Noon holsters will get my business, hands down. Great Job High Noon.
stmcelroy
Member
Here's a kydex AIWB/IWB holster that I just finished up for a customer.
a_just_cause
Member
- Joined
- Dec 4, 2011
- Messages
- 33
- Reaction score
- 0
Wow. I have one ordered from RKBA for my shield... that one looks amazing! Secretly hoping its mine 
Of course I ordered an OWB... damn that IWB looks sharp!
Of course I ordered an OWB... damn that IWB looks sharp!
Last edited:
stmcelroy
Member
Wow. I have one ordered from RKBA for my shield... that one looks amazing! Secretly hoping its mine
If your last name is a big state than it's likely.
a_just_cause
Member
- Joined
- Dec 4, 2011
- Messages
- 33
- Reaction score
- 0
hah - no...I have a long last name and living in the same state as you.
stmcelroy
Member
Yes you do. So long I had to shorten it to fit in my spreadsheet.
Similar threads
- Locked
