M&P sport trigger upgrade options

[blues7]

Good to hear, tcon. Seems that the TTU's great reputation around these parts was come by honestly.

It would be interesting to fire the single stage TTU and dual stage M2 versions side by side to experience the difference firsthand since they are both rated at 4 lbs.

 

[bergermeister]

Best choice for the $ I know of..

I use a Rock River 2 stage trigger from AR15Sales in all my Ar's. They are a low cost trigger with a clean 4 pound pull. The last one I bought was $99 dollars with free shipping if I remember correctly.

If you are not familiar with doing a 'triggerjob' you best forget it- You may improve it a little or make something totally unsafe. The geometry on the mil-spec requires initially fighting the hammer spring no matter what you do to improve it. The RR 2- stage is the best for the money, light, clean and crisp. Based on several high-dollar triggers I am familiar with and being proficient at polishing mil-spec's; Most people will be totally happy with the RR.
No, I will not argue the subjective point that most shooters will benefit with a high-dollar trigger over the RR 2-stage

 

[flyfishinjunkee]

Frustrated!

So, I received the G2S today and installed it in my new m&p sport 2... I believe I'm having a problem with the trigger, its not behaving as I'd expect it to. I've installed it several times and I'm 99% sure its in there correctly, not sure what is wrong! This isnt the first AR trigger I've installed....

Once installed the trigger appears to function in FIRE and SAFE mode. When pulled it has quite a bit of take-up, then stops. When I pull further the hammer drops. I dont feel 2 "stages".. measured trigger pull at the only stage I feel and its about 4#... Any suggestions here? I'm thinking I got a wrong part or installed something incorrectly....

 

[WVSig]

So, I received the G2S today and installed it in my new m&p sport 2... I believe I'm having a problem with the trigger, its not behaving as I'd expect it to. I've installed it several times and I'm 99% sure its in there correctly, not sure what is wrong! This isnt the first AR trigger I've installed....

Once installed the trigger appears to function in FIRE and SAFE mode. When pulled it has quite a bit of take-up, then stops. When I pull further the hammer drops. I dont feel 2 "stages".. measured trigger pull at the only stage I feel and its about 4#... Any suggestions here? I'm thinking I got a wrong part or installed something incorrectly....

Have you shot 2 stage triggers before?

 

[flyfishinjunkee]

Have you shot 2 stage triggers before?

Yes, only one in my uncles AR. It has 2 distinct stages. I only feel one stage with this trigger.

Sent from my SM-G920V using Tapatalk

 

[WVSig]

Yes, only one in my uncles AR. It has 2 distinct stages. I only feel one stage with this trigger.

Sent from my SM-G920V using Tapatalk

Do you have a trigger pull gauge? I bet the "take up" you are feeling is 2.5 lbs and the then 2 lbs and it then it breaks.

 

[flyfishinjunkee]

Guess I was confused as to how this trigger works, looks like it's fine . I'll send a range report once I get this thing out. Trigger pull is just over 4 lbs..

Sent from my SM-G920V using Tapatalk