Mod 17-3, to reblue or not

[pat_riot]

I obtained a retired S&W Mod. 17-3 that my agency used for training recruits many, many years ago. I was able to purchase it as one of my retirement guns. It's a beautiful revolver, but has spots where the bluing has rubbed off of the frame...

The big question is, should I send it in to Smith & Wesson for a rebluing or just leave it as is? I have no intentions of selling it; I desire that it stay in my family and be passed down to my heirs. Thanks ahead of time for your thoughts.

 

[Scorpion520AZ]

I'll bet there's a few good places in Texas for bluing firearms if you decide to go that route.

Gun Bluing Specialty Shop

 

[Troystat]

Seem like your 17 is in decent shape with some reasonable wear I would leave it be. If you send it to somebody like Fords it will look great but there will be no sign that you owned it. Shoot it and enjoy it.

 

[g8rb8]

You asked for opinions so here goes.

I would leave it alone because:
1. I think it looks pretty good.
2. It won't shoot any better after being refinished and you won't be worried hurting the finish when you take it shooting.
3. You could spend the $220 you would spend on a blue refinish on ammo.

On the other hand if cost is irrelevant and you heart's desire is to have a shiny, new-looking revolver then get it refinished.

 

[gmborkovic]

Hello pat, I can tell you, if you re-blue it you will regret it. Plus you are out the money. Leave it alone, its telling a story.

 

[BE Mike]

Leave it. Shoot it. Enjoy it.

 

[arjay]

I like it.The trouble with reblueing is the tendency to over polish the gun.It won't look right.

 

[Usmc5811]

Another vote for leaving it as is. Ain't nothing wrong with a little honest wear.

 

[Wee Hooker]

Quality rebluing isn't cheap and it's cost is never recuperated if you sell it.

My vote would be to shoot the heck out of it. If you determine you love it, and won't ever part with it,THEN (and only then) consider dressing it up.

 

[Bladeswitcher]

I vote to leave it be.

 

[reddog81]

Even if the reblueing was free I'd still say leave it alone.

 

[Narragansett]

I would leave the gun as it, and no rebluing. A light polish with simichrome, andthen wax and shoot

 

[Jdavis]

If the imperfections bother you, I see no reason not to send it to S&W for a restoration. Since you intend to keep it for a family heirloom and have no plans to sell it, resale value isn't an issue for you. Battle scars are fine if you see them as a sign of the gun's history. If you don't, you will never be truly happy with it until the "ugly" is removed. I say this from my personal experience. I have a 29-2 that was worn and used hard over the years. I love that old gun and will never part with it. A couple of years ago, I had Ford's do their magic making it look new again. I am so glad that I had this done and I hope that someday my grandchildren will enjoy it as I have.

 

[Birdgun]

I agree with most. Leave it as is. The wear on the revolver tells part of the story that this revolver was used for training recruits. That gives the revolver some honored history.

 

[yfdcap]

I say do what ever is going to give YOU the most enjoyment. I used to think to much about resale and what my kids will do or think of them. Trying to just do what makes me happy with my guns. Life is short. Enjoy your guns while you can.

 

[Eddietruett]

It's got character. Just shoot it.

 

[IAhunter]

I would just shoot the heck out of it, and not bother to refinish it.

 

[Klaatu]

Not exactly your situation, but this is my experience. If the finish bothers you now, you will really be disappointed with anything less than a first rate refinish. I'm not advocating for or against, but if you choose to go the refinish route, don't go for a budget refinish. I bought a refinished 27 as a shooter. It didn't disappoint in that regard, and it is one of my daughters favorite guns to shoot. I knew what I was buying and what I was buying it for and didn't think the finish would bother me. I may have been happy if it was just honest wear like yours, but the gloppyness of the refinish just kind of gnawed away at me. One day it will go to my daughter, and I couldn't leave her an ugly gun, so I had it re-refinished. The roll marks are no worse than they were when I bought it and it is better in every other regard, so no regrets. I've got more money in it than it's worth but the memories shooting it with my daughter are far more valuable than the money I've got in the gun.

 

[yfdcap]

Here is a 28 from my collection. It is a early mod 28 that my grandfather owned, passed down to my father and then to me. It will go to my grandson next. It was modified by a LEO before my grandfather bought it from him. I was witness to the transaction at the age of 5. That was in 1967. He had the full treatment for the time done. Trigger job, jeweled trigger and hammer, new stocks and a re-blue. The re-blue was not very good. The gun has been a mattress gun for my grandfather, a pig hunter for my dad and a delight to shoot for me. Would not trade it for a NIB of the same. Hope my grandson feels the same way. Guess my point is its a family gun. We have and continue to enjoy it. Most who see it would say it was ruined with all the work done to it. Not us.

 

[shouldazagged]

I like them with well-earned character and stories they could tell.

It gives them personality that tops pristine perfection for me any day.