I have accumulated a number of parts that I will never use, so I am offering them for sale. Some of the parts have been in guns, and some are new old stock, which is the way they came to me. If you are interested in any of them or have any questions, please contact me via e-mail through the forum. Please don't post in the thread as I am not going to be watching it. It will be updated and "bumped" only if items are added or if an item runs out.
For the small part, shipping will be via USPS in a small padded envelope and will be $3.00. If you desire tracking or expedited delivery, please let me know and I will use Priority Mail which will be $6.00. Shipping is included in the price of the barrels.
Payment is requested via USPS money order or, if you are a member of the S&WCA, a personal check is also OK.
Also, at this point I am not interested in a bulk sale. The purpose of this listing is to make items available for individuals who have a revolver that has a problem, but either want to fix it themselves or have been unable to find the right pieces and the gun is lying useless. Hopefully combining this and the explanations that are stickies in the gunsmithing section will facilitate someone getting one back up and running.
Model 10 - two-inch heavier profile barrel. This barrel has not been on a revolver. It has a heavier profile and the front sight is slightly less than 1/8" wide. Price is $55.00 including shipping priority mail.
Model 10 - two-inch slim profile barrel. This barrel has not been on a revolver.It has a slim profile and the front sight is approximately .08" wide. Price is $55 including shipping priority mail.
SOLD - K-32 Post-war Light Barrel. Offered is an unfinished .32 "light barrel." It is of the style as show on the upper revolver in the photo on page 129 of the third edition of the SCS&W. It has been rifled, drilled for the front sight base and for the front latch. It requires polishing and blueing. There is some discoloration but no pitting. There are no markings which makes it easier to mark it for the caliber of your choice. SOLD
Long Action K-frame hands. There are two types of hands. One has the ramp for the side plate mounted hammer block. The second type has a hump and is of the earlier type where the hand was tensioned by a spring and plunger in the side plate. If you order a hand, please measure the width of yours. If the carry-up is slow, most of the time a hand that is .002" wider will solve the problem. A photo of your hand would also be helpful. The price of a long action K-frame hand is $ 17.00.
Modern K-frame hands. Most of these are marked with an "S" for stainless. I have never had a problem putting these into a non-stainless gun. If you order a hand, please measure the width of yours. If the carry-up is slow, most of the time a hand that is .002" wider will solve the problem. A photo of your hand would also be helpful. The price of a modern K-frame hand is $ 17.00.
Double action sear. This is also called a "fly". These will fit a K, L, or N-frame hammer. If you order one for an early K-frame, please measure the width of your sear. There are two widths. These are all more modern and are narrower. These are new and have not been fitted to a gun. The price of a double action sear is $10.00.
J-frame hammer blocks. I am only aware of one type being used in the modern J-frames. If there is another type, please let me know. The price of the J-frame hammer block is $7.00.
Modern J-frame hands. Most of these are marked with an "S" for stainless. I have never had a problem putting these into a non-stainless gun. If you order a hand, please measure the width of yours. If the carry-up in your revolver is slow, most of the time a hand that is .002" wider will solve the problem. A photo of your hand would also be helpful. The price of a modern J-frame hand is $ 18.00.
Long Action J-frame hands. If you order a hand, please measure the width of yours. If the carry-up in your revolver is slow, most of the time a hand that is .002" wider will solve the problem. A photo of your hand would also be helpful. The price of a long action J-frame hand is $ 17.00.
Double action J-frame sear. This is also called a "fly". These are new and have not been fitted to a gun. There are two types. Please specify which kind you need. A photo of the one being replaced would help. The price of a double action sear is $10.00.
If you want a part, I am happy to e-mail a photo of the part before you send payment.
For the small part, shipping will be via USPS in a small padded envelope and will be $3.00. If you desire tracking or expedited delivery, please let me know and I will use Priority Mail which will be $6.00. Shipping is included in the price of the barrels.
Payment is requested via USPS money order or, if you are a member of the S&WCA, a personal check is also OK.
Also, at this point I am not interested in a bulk sale. The purpose of this listing is to make items available for individuals who have a revolver that has a problem, but either want to fix it themselves or have been unable to find the right pieces and the gun is lying useless. Hopefully combining this and the explanations that are stickies in the gunsmithing section will facilitate someone getting one back up and running.
Model 10 - two-inch heavier profile barrel. This barrel has not been on a revolver. It has a heavier profile and the front sight is slightly less than 1/8" wide. Price is $55.00 including shipping priority mail.
Model 10 - two-inch slim profile barrel. This barrel has not been on a revolver.It has a slim profile and the front sight is approximately .08" wide. Price is $55 including shipping priority mail.
SOLD - K-32 Post-war Light Barrel. Offered is an unfinished .32 "light barrel." It is of the style as show on the upper revolver in the photo on page 129 of the third edition of the SCS&W. It has been rifled, drilled for the front sight base and for the front latch. It requires polishing and blueing. There is some discoloration but no pitting. There are no markings which makes it easier to mark it for the caliber of your choice. SOLD
Long Action K-frame hands. There are two types of hands. One has the ramp for the side plate mounted hammer block. The second type has a hump and is of the earlier type where the hand was tensioned by a spring and plunger in the side plate. If you order a hand, please measure the width of yours. If the carry-up is slow, most of the time a hand that is .002" wider will solve the problem. A photo of your hand would also be helpful. The price of a long action K-frame hand is $ 17.00.
Modern K-frame hands. Most of these are marked with an "S" for stainless. I have never had a problem putting these into a non-stainless gun. If you order a hand, please measure the width of yours. If the carry-up is slow, most of the time a hand that is .002" wider will solve the problem. A photo of your hand would also be helpful. The price of a modern K-frame hand is $ 17.00.
Double action sear. This is also called a "fly". These will fit a K, L, or N-frame hammer. If you order one for an early K-frame, please measure the width of your sear. There are two widths. These are all more modern and are narrower. These are new and have not been fitted to a gun. The price of a double action sear is $10.00.
J-frame hammer blocks. I am only aware of one type being used in the modern J-frames. If there is another type, please let me know. The price of the J-frame hammer block is $7.00.
Modern J-frame hands. Most of these are marked with an "S" for stainless. I have never had a problem putting these into a non-stainless gun. If you order a hand, please measure the width of yours. If the carry-up in your revolver is slow, most of the time a hand that is .002" wider will solve the problem. A photo of your hand would also be helpful. The price of a modern J-frame hand is $ 18.00.
Long Action J-frame hands. If you order a hand, please measure the width of yours. If the carry-up in your revolver is slow, most of the time a hand that is .002" wider will solve the problem. A photo of your hand would also be helpful. The price of a long action J-frame hand is $ 17.00.
Double action J-frame sear. This is also called a "fly". These are new and have not been fitted to a gun. There are two types. Please specify which kind you need. A photo of the one being replaced would help. The price of a double action sear is $10.00.
If you want a part, I am happy to e-mail a photo of the part before you send payment.
Last edited:
