Model 27-2 6" P&R Help

[640400obpd]

I just picked up this beauty S&W Model 27-2 P&R 6 inch.
Shows a little wear. The price was $50.
Yes I said $50.
The only problem is the dork who had it before me was a little careless and damaged the barrel. The barrel has two bulges in it. I cannot imagine how he managed to put two bulges in the barrel. I guess you clear a squib with another round?!?!?! If you look closely at the photo of the shot down the muzzle you can see the bulges. :-( Anybody out there have a ballpark figure what S&W would charge to change out the barrel and re-blue this beauty.
I am going to call them tomorrow but figured this is a topic that some of you guys could sink your teeth into.
Picasa Web Albums - scrapinbuy - March 19, 2013@@AMEPARAM@@https://picasaweb.google.com/data/feed/base/user/110061996569115129695/albumid/5857156538571083169?alt=rss@@AMEPARAM@@110061996569115129695@@AMEPARAM@@5857156538571083169
Thanks

 

[diamonback68]

I would check with them, they may not have barrels for it anymore.

 

[ditrina]

The re blue is not the problem..( about $300.00 I think) I don't believe S&W HAS the barrel.. to change out.. You might try Jack's First parts, Numirich or Brownells.. or Gun Broker

If you find a barrel.. THEN call Smith and ask what the charge would be with you supplying the barrel..

Good luck..

 

[shawn mccarver]

I just picked up this beauty S&W Model 27-2 P&R 6 inch.
Shows a little wear. The price was $50.
Yes I said $50.
The only problem is the dork who had it before me was a little careless and damaged the barrel. The barrel has two bulges in it. I cannot imagine how he managed to put two bulges in the barrel. I guess you clear a squib with another round?!?!?! If you look closely at the photo of the shot down the muzzle you can see the bulges. :-( Anybody out there have a ballpark figure what S&W would charge to change out the barrel and re-blue this beauty.
I am going to call them tomorrow but figured this is a topic that some of you guys could sink your teeth into.
https://picasaweb.google.com/110061996569115129695/March192013?authuser=0&feat=directlink
Thanks

The first issue will be finding a barrel. Since Model 27s are in the Classic Line now, I wonder if one of those barrels will fit. If so, you will probably have to go with 4 or 6.5 inch as those are the two barrels available in the Classic Line. Naturally, if you can find a period barrel in good shape, S&W can install that.

You will want to have a complete reblue done as the blue on the barrel and the frame will not match.

I have no idea as to cost, but it will be worth it and you will have a great shooter.

Be sure you have them go over the action while it is there and change out any bad or modified parts.

I think I would make it a four inch.

 

[640400obpd]

A 4 inch would be nice. I am going to start calling in the morning.
No hurry. $50 in the gun, I can wait.

 

[640400obpd]

Will a model 28 barrel fit this gun?

 

[wetdog]

I saw a 28 with a 27 barrel on it in a gun shop not to long ago. It did sell, but I can't remember the price.

 

[jsfricks]

Will a model 28 barrel fit this gun?

Yes, I would think so. That's just a plain version of the 27 but those who know better than me will be along shortly.

 

[murphydog]

Will a model 28 barrel fit this gun?

Yes; same part, different finish and stampings.

 

[640400obpd]

You guys rock. I guess if I cannot find the correct barrel I will pick up a 28 barrel.

Thanks

 

[ttrotter]

Just my personal preference, but if you can find a 5" barrel I would sure go with that!! Probably impossible though :-(

 

[640400obpd]

S&W said they would install a barrel but would not re-pin it.
Only crush fit it.
Rats!! Now I have to find someone who will install & re-pin a barrel for me.

 

[2hawk]

Nice Score!

Hard to tell from the photos, but if the damage occurred in front of the ejector shroud it seem like shortening would be the way to go.

 

[Dennis The B]

S&W said they would install a barrel but would not re-pin it.
Only crush fit it.
Rats!! Now I have to find someone who will install & re-pin a barrel for me.

Let 'em put on another barrel. Take it to a good 'smith, and he can probably install a pin, after you zero the sights. A pin would cost chump change, and the hole in the frame is already there. Numrich has the barrel pin for $2.35/ea.

Barrel Pin Gun Parts | 322870 | Numrich Gun Parts

 

[640400obpd]

Sounds like a plan.
I located a 4" model 28 barrel and it will be in my hands in a few days.
Not original but it is new and will fit. I guess off to S&W to have them install it. I'll post some photos when I get it all done.

 

[fyimo]

Sounds like you worked it out.

 

[640400obpd]

I would have liked to have an original barrel but I guess it will be a great shooter.

 

[sw282]

6404---Dont cheapen a fine gun with a 28 barrel. l found 4 Mod 27 barrels in less than 3 minutes on one gun net auction site alone. 6'' nickel,,,5''blue,, 3 1/2'' blue,, 6'' blue. All p&r barrels too

 

[LEO918]

What he said^^^^^^^^^^

 

[640400obpd]

Yes sir, I saw those barrels.
Might have to get some chrome stripper.