I am helping a friend with info on a 48-3 with the 8" barrel. It is a pinned/recessed 1975, but using my 4th Edition S&W book, the serial number is not listed I can see. It has me thinking as to whether it's a -2 to -3 transition model? The serial is 8k999 & change. The 48 -3 starts it seems at the 8k200xxx mark. The entry just above is a 6k number to an 8k, but that 8k entry ends before this model 48s serial starts. It lies in between the two somewhere. Is it made clearer in the 5th edition book maybe ? Where does the 48-3 8k999xx fall?
Model 48-3 transition gun?
- Thread starter Becket
- Start date
Register to hide this ad
Hair Trigger
US Veteran
5th Ed SCSW says in the "engineering & Production changes for the M48-2 "many S/N's in the 6Kxxxx range." That doesn't make sense to me because the dash 2 was 1962-1967, the dash-3 was 1967-1977 and the SN listings in the appendix show 6K SN's as 1974 and 1975. What is the SN of your revolver, stamped on the bottom of the butt? If you have target stocks you'll have to remove them to see it. You can also look inside the yoke cut for one like this (my M48-4 is from 1981). 8K should be 1975, the listing shows 8K20763 through 9K 100000 is 1975.
Last edited:
In the 5th Edition for 8k999xx falls in 1975.
OP
Ok I believe those numbers are different than in 4th edition
OP
Been a long day, jeez; of course it is after 207xxx. We were trying to fit it into the start of the -3, instead of the end of that year, like of a regular number (99 is before 207) without seeing its as 999 serial number being higher. Both of us did it. Thanks, my old brain couldn't fit anything more in today apparently. Beauty of a 48 safe queen though, regardless.
