Model 60 .357

[jmcisc]

A friend of mine is thinking about selling his model 60 .357 magnum. I have only seen it very briefly, but it looks to be in excellent condition. I am not at all familiar with this model so I was hoping you could provide me with some information about it, including what you think it might be worth.

Also, as an aside, he says he wants to replace it with a different revolver that would place less strain on his shoulders. I've given him my suggestions, but maybe someone here has a better idea. Please share if you do.

Thanks in advance for your help.
Joel

 

[Pizza Bob]

A 3" K-frame would fill that bill.

JMHO.

Adios,

Pizza Bob

 

[Texas Star]

Less strain on his shoulders?! How is he carrying this gun?

We need to know his physical condition, age, weight, etc.

If he wears a shoulder holster, a heavier gun will cause more strain. If not a shoulder holster, I don't see where this strain comes from.

I suspect this story is BS. Buy the gun; disregard his story. Be sure it's as it should be.

I could speculate further and probably be right, but I'll leave this here, lacking further info.

Does this gun have The Lock? That might be part of his motivation to sell. Is it a snub or with a three-inch barrel?

 

[colt_saa]

Joel,
The J-Magnum revolvers are a favorite of mine. They are offered in many models

The 357 Model 60 was offered as a standard production gun in 2", 3" and 5"

The 2" version is by fa the most commom configuration

2" Model 60​

It was also offered as a Pro series in a 2 1/2" and a 3" offering.

Pro series firearms are production guns that get one or more Performance Center options added to then.

3" Model 60 pro​

Then there were several Distributors that ordered unique configurations of the Model 60 that were exclusive to the Distributor

Lew Horton Small Hunter​

Depending on which Model 60 configuration we are talking about, and the condition it is in, plus depending on the box and paperwork being included . . . . Value of a shooter grade might be as low as $450 while a pristine collectible grade could exceed the $1000 mark

 

[jmcisc]

A 3" K-frame would fill that bill.

JMHO.

Adios,

Pizza Bob

Thanks, Bob. I'll mention the K frame to him.
Joel

 

[jmcisc]

Less strain on his shoulders?! How is he carrying this gun?

We need to know his physical condition, age, weight, etc.

If he wears a shoulder holster, a heavier gun will cause more strain. If not a shoulder holster, I don't see where this strain comes from.

I suspect this story is BS. Buy the gun; disregard his story. Be sure it's as it should be.

I could speculate further and probably be right, but I'll leave this here, lacking further info.

Does this gun have The Lock? That might be part of his motivation to sell. Is it a snub or with a three-inch barrel?

Thanks for the response.
I don't think he is concerned about carrying. He is mid-70's and has had shoulder surgery. I think his issue is home protection and the pain he experiences when firing the model 60.

Model 60's are not high on my need-to-own list.
I'll provide additional details after I see him again.
Joel

 

[BAM-BAM]

Number of variations..... you/we need more detailed information.

Example I own a 60-10 3" .... think micro 5 shot 686; no lock

Colt-saa 's 3" I think is a 60-15 with the internal lock.

Finally condition condition condition ...... trumps everything.

 

[jmcisc]

Joel,
The J-Magnum revolvers are a favorite of mine. They are offered in many models

The 357 Model 60 was offered as a standard production gun in 2", 3" and 5"

The 2" version is by fa the most commom configuration

2" Model 60​

It was also offered as a Pro series in a 2 1/2" and a 3" offering.

Pro series firearms are production guns that get one or more Performance Center options added to then.

3" Model 60 pro​

Then there were several Distributors that ordered unique configurations of the Model 60 that were exclusive to the Distributor

Lew Horton Small Hunter​

Depending on which Model 60 configuration we are talking about, and the condition it is in, plus depending on the box and paperwork being included . . . . Value of a shooter grade might be as low as $450 while a pristine collectible grade could exceed the $1000 mark

Thanks, Colt for your comprehensive response. I may see him later today, and have more details to post, afterwards.
Joel

 

[murphydog]

The model 60-9 is the prelock 2" (actually 2 1/8") fixed sight .357, with the current internal lock model the 60-14. The 3" adjustable sight versions are the -10 and the current one the -15 in standard and Pro Series versions as noted above. All fine guns.

 

[mrchuck]

Mine is a 60-8.
Shooting 357's it is a handful !
Carries great inside the waistband soft holster.
I use 38 special Hi power ammo. 20 to the box.
This load is just fine and accurate.

 

[white cloud]

I have both the 3" and 2-1/8" prelock models. Both are excellent shooters that I will never part with. The so called medium power .357s like the Remington Golden Sabers shoot just fine out of them. I think the 3" model makes a great walk around the woods gun.

 

[BAM-BAM]

I think the 3" model makes a great walk around the woods gun.

Ditto..... my 3" 60-10 has become my Penn's Woods "Kit Gun"..... shot shells to any .38sp and loaded with 158gr soft points,not for shooting but in case I ever have an "oh s---" moment!!!!!!

 

[pasound]

I have a 60-15 3" Pro. Good shooter. The blocky factory grips don't fit my hand well, so I use the Hogue 60000 grip and it behaves with .357's. Mostly I shoot .38's in it, and keep Rem .38+P LSWCHP in it for personal protection use.

 

[Cal44]

I have a 60-9 2 1/8 inch and a 60-15 3 inch.

Both shoot 357 mag.

And the have the best triggers of my j frames.

Highly recommended.

 

[Old cop]

I'm also wondering what his Model 60 has to do w/shoulder strain. If magnum loads are too much load .38 and problem solved. As an overly suspicious old cop I'm not sure about his story but if you trust him go for it.

 

[MetalMan]

I have a 60-9 2 1/8 inch and a 60-15 3 inch.

Both shoot 357 mag.

And the have the best triggers of my j frames.

Highly recommended.

While I was wary at first about the Model 60-15 - specifically as for the IL - it has become a regular in my EDC rotation over the last 3 years.

Carries great in a Milt Sparks VMII. Great shooter at the range. No complaints.....

 

[THE PILGRIM]

Always buy the Gun!
Never buy the story!
Unless, of course you are in the publishing business!

 

[BB57]

For comparison purposes:

My 2.125" Model 60-14 weighs 24.4 oz loaded (5 rounds).

My 2.5" Model 66-4 weighs 37.1 oz loaded (6 rounds).

My 2 1/2" Model 686-5 weighs 39 oz loaded (7 rounds).

And, oddity of oddities, my 3" Model 686-6 weighs only 38.6 oz loaded (7 rounds).

In my experience a Model 60 isn't exactly comfortable to shoot with .357 Magnum loads. The K and L frame are however reasonably comfortable to shoot with .357 Magnum and are very pleasant to shoot with standard pressure .38 Special.

A standard pressure .38 Special isn't bad in a Model 60 either, but if he's looking for maximum comfort and minimum strain on his shoulders due to recoil, a K or L frame is the way to go.

 

[murphydog]

BTW, there was also a model 60-18, a 5" version in .357. Always looks a little odd to see such a long barrel on a J frame...

 

[Texas Star]

A heavier gun will be harder to hold and aim.

I think his solution is to use Plus P .38 ammo in the M-60.