Multi Bit Screwdriver Set

[yeti]

I would like your opinions on a good quality multi bit & driver set for personal use.
I do have a small set of Grace screwdrivers, but would really like a multi bit kit to use on different pistols including S&W's, Italian shotguns, & American rifles.
Some of these multi sets seem cheap in quality.
Which manufacturer makes a good kit with a decent handle(s) and relevant bits that aren't likely to twist off or break just looking at a tight screw?

 

[rck281]

Check out the many different sets at Brownells.

 

[GLV]

For the range, I like Chapman, for the bench, Brownell's 20 screwdriver set with wood rack. Do I break screwdrivers? yes, and both of these companies sells replacement bits and screwdrivers. Would much rather break a screwdriver than damage or break a screw. Heat is sometimes necessary to break down locktite.

 

[dfariswheel]

The best quality and the industry standard are the Brownell's Magna-Tip driver bits and handles.

They make far more sizes then anyone else, and the quality is way above any one else.
If you break a bit, they send you a new one free with an email request.
These are American made and are extremely hard and smooth finished.

I recommend buying the Law Enforcement size handle. It's the perfect size for good control.
They sell handles with magnet or clip retention.

They also carry ultra thin bits as used on the European shotguns.
Because they carry so many sizes and thicknesses you seldom ever have to grind a bit.

I recommend buying the biggest set you can afford and adding bits as needed.
Buy quality, you only have to buy once.

 

[Avery11]

The best quality and the industry standard are the Brownell's Magna-Tip driver bits and handles.

They make far more sizes then anyone else, and the quality is way above any one else.
If you break a bit, they send you a new one free with an email request.
These are American made and are extremely hard and smooth finished.

I recommend buying the Law Enforcement size handle. It's the perfect size for good control.
They sell handles with magnet or clip retention.

They also carry ultra thin bits as used on the European shotguns.
Because they carry so many sizes and thicknesses you seldom ever have to grind a bit.

I recommend buying the biggest set you can afford and adding bits as needed.
Buy quality, you only have to buy once.

THIS^^^ Right on the money. Specific bits for S&W

 

[all357mag]

Try Wheeler Engineering set. Midway sells them.

 

[ogilvyspecial]

Try Wheeler Engineering set. Midway sells them.

I tried the Brownells, which are good for light, easy jobs, but
decided on one of The Wheeler Sets.....and was glad I did.

 

[kennyb]

brownell's set is the best that i have found...top quality

 

[stu1ritter]

As a Mercedes mechanic for 30 years I really appreciate fine tools with good steel. Most of my MB tools are Stahlwille and Hazet. I've owned almost all of the Brownells bits for 20 years now (including the thins) and have never had to grind a bit or order a replacement for a broken bit. Great stuff. I use them with my Snap-On ratcheting screw driver handles.
Stu

 

[yeti]

Thank you for the replies.
Brownell's Magna-Tip's are the most recommended, then Wheeler. I believe I would prefer a good sized Magna-Tip set with a LE/Magnetic handle.
Any others to consider?

 

[ozo]

These Wiha are the best I have ever used.....

Wiha Professional Quality Tools Home Page

 

[03Fatboy]

I have been very happy with Brownells magna tips, these were the first and only bits I have bought. The LE magnetic handle is perfect, I tried the larger version and now it only sits in the tool box.

 

[505Gibbs]

+1 for Brownell's sets and, as noted, replacement is not questioned!

 

[chief38]

I don't doubt that Wiha bits are great, but it is nice and convenient just to hit the speed dial button, call Brownell's and report a broken bit. A new one will be in the mail and in your mail box in a few days - no questions asked, no need to return broken bit. Over the years I have only had to replace two, and those were for a Browning shotgun and are EXTREMELY thin blades. The Brownell's line is very good quality and for the average person they will last a lifetime. I use mine just about every single day, and they are still in perfect condition.

By the way, I find the "Law Enforcement" handle to be about the best size for working on guns.

Chief38

 

[smitholdtimer]

Brownell's

What chief38 said!!!!!!! Midway refused to replace a broken bit!

 

[yeti]

Thanks guys. I really appreciate all the options you posted. Those Wiha bits look nice. I may consider those for regular fix stuff around the house and auto/moto use.

Magna-Tips are overwhelmingly recommended and dedicated for smithing use. I like the fact that you can call them up and get any damaged bits replaced without a hassle.

 

[dfariswheel]

Brownell's bits are American made, extremely hard, and very smooth.

Wheeler bits are Chinese made, not as hard, and not very smooth.