N Frame Trigger Job
- Thread starter 41special
- Start date
Register to hide this ad
Until something better comes along, you could order a Wilson Combat spring kit and change out 2 springs yourself.
bigggbbruce
Member
I changed my 625 springs with Wolff ribbed reduced power and a 14lb trigger return. Sweet. I've shot about 60 with 100% ignition. Nothing else needed for that one.
If you have ability to do it yourself give it a go.
If you have ability to do it yourself give it a go.
USBP SW
Member
Nothing tunes the action of a Smith & Wesson like shooting it. That's my opinion, all the polishing occurs exactly where it's needed and there's no unnecessary grinding/honing or accelerated wear. If you can't afford the ammo, get some snap caps and dry fire practice while watching tv, make sure it's unloaded or you'll be buying a new television.
Yes but the internals may need some grease or oil... and the rebound spring is oversprung... and easy to change out.
I have also noticed machine marks on the rebound slide and cylinder stop not to mention the window where the cylinder paw resides. With a stone you can take those out and not have excessive wear on the other parts that did not have any tool marks. No need to cycling the action 1000s of times. Simply cycle and fire it a bit and then pop the hood.. you will see the wear marks.
Invictus357
Member
- Joined
- Feb 20, 2012
- Messages
- 566
- Reaction score
- 512
I sent two back to SW for the "Master Action Revolver Package". Was worth every penny. I thought they did a marvelous job.
ultratec00
Member
- Joined
- Jul 5, 2011
- Messages
- 762
- Reaction score
- 346
Seems most smiths from the factory come bone dry. Doesn't take much to smooth them up. Break them down, clean, and apply a good lube where needed. I prefer a good spring kit myself and will polish a few select areas.
Did you channel your inner Elvis?
- Joined
- May 30, 2005
- Messages
- 40
- Reaction score
- 7
Nelson Ford
USBP SW
Member
Actually, I was a firearms instructor and was fortunate to be one of those rare individuals that learned from the mistakes of others. I used a true incident to warn others of the risks. The incident happened with a service firearm in an apartment complex, therefore, it was a reportable incident, requiring an investigation. Fortunately, the tv, the wall and a blemished career were the only casualties, the projectile did not penetrate the wall of the adjacent apartment.So how much did the new TV cost you?
I was just giving you crap. Reminded me of myself setting myself up for somebody to pick on.
Have a great day
Tom
Have a great day
Tom
USBP SW
Member
I know but before someone feels sympathetic and tries to sell me their old tv, I already have three hand-me-up tv's from my son.
You have a great day also, take care!
Steve
