nickeled K-frames with magnas!

[stevieboy]

Rags started a wonderful thread showing Ks with Magnas. Sadly, I don't own one to contribute to his thread but I do have a nickeled 19-3. So, let's start a new one, nickeled K's with magnas!

 

[GF]

How 'bout ANOTHER nickel Mod 19-3 with magnas...!?!

... can you ever have too many?

GF

 

[pennlineman]

13-1

 

[Cocked & Locked]

do these count?

15-4 with "magna style" Sambar stag

 

[Dragon88]

Poor picture, but a good shooter. Nickel 10-6 4". Paid $229 for this one and it's one of my favorite range guns.

 

[Dennis The B]

Here's my...

...Model 15, nickel, with Magnas:

 

[ScottJ]

Can a pre-61 join the party?

 

[semperfi71]

 

[JCS&W]

Ok, some K frames with magnas.

 

[Art Doc]

ScottJ- pre 61?

 

[xray97]

M15-3

 

[ScottJ]

ScottJ- pre 61?

Yeah, mine isn't model marked. I would guess it to be a 1956 gun if I'm reading the SCSW correctly.

 

[crsides]

My one and only

Charlie

 

[donadler]

 

[redlevel]

Model 10-5 . . .

With Lobo carved Threepersons . . .

 

[Victor69]

Recently acquired 19-4

Picked up this Mint Nickel 19-4. I have a question though the pin that locks the barrel in place is loose to the point I can take it out. Is this normal and how can I keep it to stay in place ?

 

[jpdopes]

 

[Pilgrim]

unfired 15-3

 

[Stranglehold]

15-3

Roe

 

[Cocked & Locked]

Picked up this Mint Nickel 19-4. I have a question though the pin that locks the barrel in place is loose to the point I can take it out. Is this normal and how can I keep it to stay in place ?

I would take the pin out and put some blue Loc Tite on it...then put it back in place.

 

[Victor69]

I would take the pin out and put some blue Loc Tite on it...then put it back in place.

Great minds think alike. That's what I did and I just checked on it and it seems more secure, I asked though cause I wasn't sure if this is the norm. Thanks

 

[Mike SC Hunter]

I would take the pin out and put some blue Loc Tite on it...then put it back in place.

Or you can bend it slightly in the middle and tap it back in.

 

[james56]

S&W M19-4 2.5"

 

[Victor69]

Or you can bend it slightly in the middle and tap it back in.

Actually drove it out again then tried to flatten it on one side and drove it back in Following some advice from Grant Cunningham, it seems like it won't slip out now.