OP
works good no problems.How does the SA work with the "sling shot" method to chamber a round.? The Belgian HPs, as a rule, don't like it.
Picked up the Springfield SA-35 Hi Power range report added
- Thread starter deno56
- Start date
Congrats to the OP, I have to admit I’m tempted. Am I on the list? Hint: Last month I replaced my iPhone 4S.
It’s amazing that the HP has had so few compact versions. It’s like the 1911 and the HP are two opposite ends of the scale, when in actuality they are similar in almost every other aspect.
Let’s hope SA makes a few different size options. Who’s going to be first to send their new SA to a custom house?
It’s amazing that the HP has had so few compact versions. It’s like the 1911 and the HP are two opposite ends of the scale, when in actuality they are similar in almost every other aspect.
Let’s hope SA makes a few different size options. Who’s going to be first to send their new SA to a custom house?
Sistema1927
US Veteran
And, in addition to ambi safeties being available, they are much easier to install than in a 1911. Yet, when I get one of these, I will probably be installing an SFS in it.
gregintenn
Member
You Ain't shot it yet? The rain's over.
brendonjames65
US Veteran
Congratulations! Beautiful gun, I’m a bit jealous!
OP
range report
took the gun out back today and shot 15 rounds of 115gr Winchester white box FMJ, 15 rounds federal 124 gr FMJ and 8 rounds of speer gold dot 124gr+P HP. All ran great, accuracy was outstanding but I was only shooting at about 6 yards. I used my Lyman tiger gage and got a 10 pull average of 5.14lbs. the steel target is what Lee Barner shot yesterday from 15 yards when we got back to my house, all the hits in the middle are Lee's, I did not want to mess up his group so I used the rest of the target.
took the gun out back today and shot 15 rounds of 115gr Winchester white box FMJ, 15 rounds federal 124 gr FMJ and 8 rounds of speer gold dot 124gr+P HP. All ran great, accuracy was outstanding but I was only shooting at about 6 yards. I used my Lyman tiger gage and got a 10 pull average of 5.14lbs. the steel target is what Lee Barner shot yesterday from 15 yards when we got back to my house, all the hits in the middle are Lee's, I did not want to mess up his group so I used the rest of the target.
Attachments
took the gun out back today and shot 15 rounds of 115gr Winchester white box FMJ, 15 rounds federal 124 gr FMJ and 8 rounds of speer gold dot 124gr+P HP. All ran great, accuracy was outstanding but I was only shooting at about 6 yards. I used my Lyman tiger gage and got a 10 pull average of 5.14lbs. the steel target is what Lee Barner shot yesterday from 15 yards when we got back to my house, all the hits in the middle are Lee's, I did not want to mess up his group so I used the rest of the target.
As I said in the first thread about these pistols, I don’t think Springfield will be able to run the lines quickly enough to meet demand.
Thank you for an excellent report.
BLACKHAWKNJ
Member
- Joined
- Oct 25, 2006
- Messages
- 6,187
- Reaction score
- 6,625
Forget what I was earning, I was a PFC E-3 in the Army at the time.Required some carefully budgeting, but it was worth it.
My HP has always been accurate with lead bullets.
My HP has always been accurate with lead bullets.
- Joined
- Jun 28, 2007
- Messages
- 27,664
- Reaction score
- 21,335
The OP mentioned he went to the shop with another Forum member; the other member mentioned the OP was just behind someone on the wait list who had declined the purchase, and the shop probably hadn't had time to call the OP.
How much were you making an hour back in 1967?
^^^what he said. Yes Muley Gil, you are correct. And back then, frankly, the HP was not the most desirable gun. There were few semi-autos available, and first choice was the 1911.
Kaaskop49
Shield #5103
minconrevo
Member
- Joined
- Feb 14, 2008
- Messages
- 933
- Reaction score
- 853
BTW has anyone actually handling a new SA 35 noticed if the barrel was one piece or two piece manufactured? Some of the previous Browning manufacture was two piece and occasionally would separate in use.
Darkenfast
Member
Since the HP was manufactured for many decades (and by more than one company), I won't say it never happened, but honestly, I have NEVER heard that discussed as a weakness of the design.
2-3K is common on new vehicles. Just did the dance with a Toyota dealer on a new Tundra. People will pay it. I got hung up on the trade so no deal.
I don't have a problem with dealers asking. If they can sell their merch at those prices more power to them. Things are topsy turvy these days. Dealers going out of business at an alarming rate.
I'm waiting on a new Anaconda at retail. Not $200 above retail. $1499 retail. If it doesn't happen it doesn't happen.
minconrevo
Member
- Joined
- Feb 14, 2008
- Messages
- 933
- Reaction score
- 853
Not a weakness of the general HP design, but certainly of what can happen with two piece barrels. I have seen and handled a Browning HP with the two piece barrel partly separated. The buyer of this gun in particular was going to out some bucks to replace or repair the barrel. I am hoping the SA 35 has a one piece. One piece is very doable in today's CNC machine world.
Grayfox
US Veteran
Dadgummit! Now I want one more than ever! I will buy the first one I find available!
Other than a few very expensive custom jobs, only FM Argentina was ever able to build and market a compact version of the HP. The slide and barrel are about 1" shorter. In order to get it to work properly, they had to go to dual recoil springs and a full length guide rod. I have one and its my favorite HP.
Other than a few very expensive custom jobs, only FM Argentina was ever able to build and market a compact version of the HP. The slide and barrel are about 1" shorter. In order to get it to work properly, they had to go to dual recoil springs and a full length guide rod. I have one and its my favorite HP.
Similar threads
