Point me to a recommended Model .357 mag

Under 700 you say... well if you're not dead set on a 357 magnum, I bought myself a 44 Magnum 5 inch barrel 629-4 for $650. I've seen some really nice Dan Wessons for under $700. You can also get a Smith and Wesson Model 66 combat Magnum? The Ruger is a good option too. Best advice is buy what makes you feel safe, buy what you can handle... Shop around and good luck
 
I bow hunt. The last two years I've had encounters coming out of my stand with gray wolves coming within 100 yards. This fall I'd like to carry in a 6" .357 mag with me for self-protection, should the need arise. I'm not knowledgeable on revolvers and am confused by the number of S&W models and version numbers. I am considering a 6" Ruger GP100. What S&W model/version (new or good used) would you recommend I take into consideration? Budget $500-700.
Thanks in advance. Keith

THE VERY BEST REVOLVER FOR YOUR PURPOSE WOULD BE A CLEAN, USED, PRE LOCK M686+. THE + VERSION WOULD GIVE YOU 7 SHOTS, AS OPPOSED TO 6. (SOMEONE WITH DASH NUMBERS AT THEIR FINGERTIPS MAY BE ALONG TO TELL US WHICH DASH NUMBER WOULD HAVE THAT CONFIGURATION). THE 6" VERSION THAT YOU ARE LOOKING FOR SEEMS TO BE THE LEAST POPULAR, AND THE LEAST EXPENSIVE. REALISTICALLY, TO COME UP WITH ONE FOR $700. OTD, MAY BE A VERY DIFFICULT TASK. DON'T BE AFRAID TO SPEND A LITTLE MORE. THIS IS A LIFETIME INVESTMENT. THE FEW DOLLARS SPENT OVER YOUR BUDGET, WILL SOON BE ECLIPSED BY THE PRIDE OF OWNING AND THE JOY OF SHOOTING, ARGUABLY THE FINEST .357 MAGNUM REVOLVER IN CURRENT PRODUCTION……

ON THE OTHER SIDE OF THE COIN IS THE RUGER. YOU SHOULD DEFINITELY BE ABLE TO PICK UP A USED RUGER, WITHIN THE LIMITS OF YOUR BUDGET. THE RUGER IS A BLUE COLLAR, UTILITARIAN, WORKHORSE. IT IS OVERBUILT, AND VERY DURABLE. IT WILL GO BANG EVERY TIME. I HAVE OWNED RUGER PRODUCTS, AND NEVER HAD AN ISSUE WITH QUALITY. THEY LACK THE REFINEMENT, THE TRIGGERS, THE LOOKS, AND THE FEEL OF THE S&W. THERE IS A REASON WHY THEY ARE LESS EXPENSIVE. THEY ARE NOT COMPARABLE ! ! ! A ROLEX AND A TIMEX BOTH KEEP TIME (AN EXTREME EXAMPLE). BOTH A CADDY AND A CHEVY WILL TAKE YOU TO THE BEACH, ETC. YOU DON'T GET TO DRIVE A CADDY AT THE COST OF A CHEVY. THE RUGER IS HEAD AND SHOULDERS ABOVE A TAURUS (DON'T GET TEMPTED BY THEIR LOW PRICES. YOU WILL BE SORRY), BUT THE RUGER IS NOT AS NICE OF A REVOLVER AS A SMITH & WESSON 686……

I HAVE BEEN SHOOTING FOR OVER 50 YEARS--MANY YEARS SHOOTING COLT PYTHONS AND DIAMONDBACKS, EXCLUSIVELY. I WOULD SAY THAT THE 686 COMPARES VERY FAVORABLY WITH THE PYTHON. I GIVE A SLIGHT EDGE TO THE PYTHON WHOSE PARTS ARE ALL HAND FITTED--BUT WE ARE COMPARING CADDIES AND LINCOLNS--VERY CLOSE, AND MORE JUST A MATTER OF CHOICE, ALTHOUGH THE 686 IS CHEAPER.. (NOTICE THAT PYTHONS ARE NO LONGER MADE, AND COLT HAS DECLARED BANKRUPTCY. THEY COULD NO LONGER AFFORD TO MAKE THE PYTHON).

I HAVE 3 M686s IN MY COLLECTION, AND THEY ARE MY "GO TO" GUNS, DEPENDING UPON MY CIRCUMSTANCES OR PLANS. THEY ARE A 2 1/2" NO-DASH, CONVERTED TO A 7 SHOOTER @ S&W, A 4" MOUNTAIN GUN--A 7 SHOOTER THAT CAN DO IT ALL, AND AN 8 3/8" NO-DASH WITH A 30MM RED DOT MOUNTED USING A CLAMP-ON, NO-DRILL MOUNT, TO PRESERVE THE ORIGINALITY OF THE GUN, WHICH WAS NOT DRILLED AND TAPPED AT THE FACTORY. THIS GUN SHOOTS LIKE A RIFLE ! ! ! I I SOMETIMES SHOOT IT ON THE 200 YARD RANGE. I STILL OWN COLT PYTHONS AND DIAMONDBACKS, BUT I VERY RARELY SHOOT THEM. I ENJOY MY 686s SO MUCH, THAT I JUST NEVER GET THE URGE TO TAKE THEM OUT OF THE SAFE…..
 
Last edited:
This is what I ended up with; got a good price on this 19-4; I'll pick up a rear sight for it.
Congratulations! Gotta love the older k-frames. Resist the temptation to shoot lightweight magnum ammo, i.e. 125 grain bullets. Leave that stuff for the 686s of this world. Feed it a steady diet of 158 grains and it will reward you with many years of faithful service.
 
Last edited:
Are wolves aggressive towards hunters in general, and if so at what range would you engage them? A 6" 686 or GP-100 (also a fine choice, by the way) will be pushing 5 pounds loaded in a holster, and for shorter distances a more compact 3-4" revolver may suit your needs well.

I AGREE WITH murphydog. THE 4" 686+ WOULD BE THE IDEAL. IT WILL CERTAINLY EXCEED THE $700. LIMIT HE HAS IMPSED ON HIS PURCHASE…..
 
I tend to agree with whoever said 9mm...being alone with something that travels in packs I would want high capacity and quick follow up shots. Maybe. Full size m&p it even the compact that still holds 12 rounds +1 in the chamber
 
I don't understand this statement. My 3" SP101 fits in the same holsters I use for my Model 60s.
I tried my J-frames in a holster used for the SP101, and the gun was not secure. The fit was sloppy, even for a thumb break. Forcing an SP101 into a J-frame holster will spoil the fit in my opinion. In any case, any thumb break will be hopeless to close, unless the holster was intended for the SP101's blocky frame.
 
Here's the first 10 rounds fired from the 19-4.

I'm the OP. I picked up the 19-4 from my FFL yesterday (transfer) and just fired it from my bench. My first revolver; I've fired lots of 1911 .45 and .22 (S&W 41). I'm pretty happy with this pistol. I think I got a real deal for $300. A picture of the pistol is posted a few posts above. Here's the 1st 10 rounds fired at 25 yards from my bench (38 Special); I'm sure it will do a lot better with practice and reloads. Thanks to everyone for all the feedback.
 
Last edited:
I suggest the S&W Model 686 4 inch barrel 6 shot cylinder.

I realize its not a 6 inch but the 4 inch barrel has a couple of advantages.

1. the 4 inch barrel version of the 686 is lighter in weight.

2. because of the short barrel it is much easier to carry then 6 inch barreled 686

3. if I may quote an old saying ounces equal pounds and pounds equal pain!
 
Last edited:
Back
Top