I have a 629-1 that I bought supposedly new in box a few years back. Come to find out that it probably was not. I had it in with a gunsmith to repair a hammer push off problem. I had removed the sideplate before giving it to them to look at the trigger and hammer surfaces and I forgot to put the hammer block back in. Well, I got the revolver back and now the hammer block is giving me trouble. If it is not installed, the revolver works fine. If I put it in, then it somehow interferes with the trigger rebound and it hangs up as the trigger is released to come forward. I am about at my wit's end!
Problem with hammer block
- Thread starter Rio Laxas
- Start date
Bruce51
Member
search
I don't have the answer to your question, but remembered a previous discussion of a hammer block issue.
http://smith-wessonforum.com/s-w-smithing/130542-66-7-hitch-hammer-block-but-works-fine-without.html
I hope this helps.
Bruce
I don't have the answer to your question, but remembered a previous discussion of a hammer block issue.
http://smith-wessonforum.com/s-w-smithing/130542-66-7-hitch-hammer-block-but-works-fine-without.html
I hope this helps.
Bruce
