Quick question: Removing QD Swivel on MOE

[ZenOhSix]

Is it easy to remove the QD Swivel that is built into the frame? I am trying to debate between the MOE (811034) vs. regular threaded barrel version (811033). I want the accessories on the MOE - but also would like to ocassionally slap on the Slide Fire stock between my AR and this. To do that, I would have to remove the QD Swivel point that is put on the MOE 811034 version.

Was curious to whomever has one - can I simply remove the swivel if needed easily?

Thanks,
Mike

 

[gzimm]

The swivel pops right off. Not sure about the actual sockets on either side that the swivel attaches to.

 

[WebSnyper]

Yes, the QD can just be pulled out. The mount can be removed if you unscrew it with a proper sized allen wrench. There are 2 "cups" and a bolt and that is it. One of the cups has threads that the bolt engages. Mine actually fell out and I had to get a replacement from Smith. I just installed it with some Blue LocTite on the bolt threads to keep it from happening again.

 

[TedWash]

My QD also fell off the last time I was at the range. I was lucky that I was able to find both cups and the screw. All of you MOE owners might want to check the tightness of the screw periodically. I will be headed to the hardware store for some Loktite before my next trip to the range.