Time to clean up a few stuffed drawers.
All prices shipped to lower 48.
Prefer MO or PayPal.
(If you elect to use PayPal PLEASE select Goods or Services. I want to make sure I "render to Caesar the things that are Caesar's.)
Thanks for looking.
James
SOLD - Dillon 5JR (made by Mitch Rosen) leather holster for 4” K / L frame.
Up to 1 ½” belt.
Very nice, lightly used.
$55
SOLD - OTHER VENUE BladeTech Full Size 1911 holster.
This is the Kydex model NOT the cheaper injection molded one.
Up to 1 ¾” belt.
Was $55 - Now $45
Handgun Scope mounts.
Useful for checking loads.
SOLD Full size 1911 grip frame.
Was $25 - Now $17.50
SOLD Browning HiPower
Was $25 - Now $17.50
SOLD - S&W Full Size 3RD Gen
$25
SOLD - Speedfeed Sport Buttstock and Forend Remington 870 12 Gauge Synthetic Black
The Speedfeed Sport model is made of a durable polymer and features a thick rubber buttpad. Raised checkering and classic styling make this a great choice for anyone who is looking for a replacement stock set.
Made with 30% glass-filled polymers, this stock and forend set is totally unaffected by bad weather. It will not chip, swell, or crack even under the roughest conditions. Patterned after the Remington Premier Stock, this Sport Stock Set features fine-line checkering, classic styling, and a non-reflective finish. The stock comes with a pre-drilled hole for a sling swivel stud* and a specially designed recoil pad. Since the sets are manufactured to factory specifications, the fit is truly excellent. Easy installation; no gunsmithing required. Set complete with stock, forend and recoil pad.
*Please note that this is a NEW Sport Model set and not the less expensive standard model and that it already has the sling swivel stud.
Speedfeed is now part of the Safariland Group.
NEW!!
Was $50 (Retail price is $104.10) - Now $40
SOLD - Three HKS #586 Speed Loaders.
Like New
$25
Two 6-48 Three Flute Plug Taps NEW!!
These are not cheap Chinese taps but were bought from Brownell’s
Was $15 - Now $12.50
Custom OD Ground 25 / 625 Chamfer Tool
OD ground to .576” for perfect chamfer on 25 / 625 cylinders.
Use in a vertical mill or a VERY good drill press that you can sweep (indicate) the table.
Was $25 - Now $17.50
Custom Amish SASS / CAS – Wild Bunch Ammo Belt
2 ½” width sued lined with 10 dual 12 gauge and 6 .44 loops.
Applicable size shown in pictures.
Was $55 - Now $47.50
RCBS .45 ACP / AR / GAP Expander Die NIB
Was $15 - Now $12.50
SOLD - Hogue N Frame Round Butt MonoGrip with S&W logo.
Slightly used but very nice.
Includes mounting stirrup and screw.
I've had several of these through the years and had listed these grips as K/L square but but took a look at them and decided that they are for N round butt. (I tried them on my 617-0 and they wouldn't begin to go. Tried them on my 646 and they fit but were too big at the top.) I think they may have come off of a 5" 625-4 I sold a few years back.
Was $15 - Now $12.50
NIB Hogue Finger Groove 1911 Grip
Full size fame (GM or Commander)
Was $15 - Now $12.50
SOLD Hogue S&W 3rd Gen Compact .45 Grip (Have two)
For slide mounted decocker but I’m pretty sure will work on standard TDA / DAO pistols also.
NIB
Was $14 each or $25 for the pair - Now $12 each or $22 for pair
Wolff Fullsize .45 / 10mm 17# Recoil Spring (includes extra power firing pin spring) #47917
NIB
Was $6 - Now $5
All prices shipped to lower 48.
Prefer MO or PayPal.
(If you elect to use PayPal PLEASE select Goods or Services. I want to make sure I "render to Caesar the things that are Caesar's.)
Thanks for looking.
James
SOLD - Dillon 5JR (made by Mitch Rosen) leather holster for 4” K / L frame.
Up to 1 ½” belt.
Very nice, lightly used.
$55
SOLD - OTHER VENUE BladeTech Full Size 1911 holster.
This is the Kydex model NOT the cheaper injection molded one.
Up to 1 ¾” belt.
Was $55 - Now $45
Handgun Scope mounts.
Useful for checking loads.
SOLD Full size 1911 grip frame.
Was $25 - Now $17.50
SOLD Browning HiPower
Was $25 - Now $17.50
SOLD - S&W Full Size 3RD Gen
$25
SOLD - Speedfeed Sport Buttstock and Forend Remington 870 12 Gauge Synthetic Black
The Speedfeed Sport model is made of a durable polymer and features a thick rubber buttpad. Raised checkering and classic styling make this a great choice for anyone who is looking for a replacement stock set.
Made with 30% glass-filled polymers, this stock and forend set is totally unaffected by bad weather. It will not chip, swell, or crack even under the roughest conditions. Patterned after the Remington Premier Stock, this Sport Stock Set features fine-line checkering, classic styling, and a non-reflective finish. The stock comes with a pre-drilled hole for a sling swivel stud* and a specially designed recoil pad. Since the sets are manufactured to factory specifications, the fit is truly excellent. Easy installation; no gunsmithing required. Set complete with stock, forend and recoil pad.
*Please note that this is a NEW Sport Model set and not the less expensive standard model and that it already has the sling swivel stud.
Speedfeed is now part of the Safariland Group.
NEW!!
Was $50 (Retail price is $104.10) - Now $40
SOLD - Three HKS #586 Speed Loaders.
Like New
$25
Two 6-48 Three Flute Plug Taps NEW!!
These are not cheap Chinese taps but were bought from Brownell’s
Was $15 - Now $12.50
Custom OD Ground 25 / 625 Chamfer Tool
OD ground to .576” for perfect chamfer on 25 / 625 cylinders.
Use in a vertical mill or a VERY good drill press that you can sweep (indicate) the table.
Was $25 - Now $17.50
Custom Amish SASS / CAS – Wild Bunch Ammo Belt
2 ½” width sued lined with 10 dual 12 gauge and 6 .44 loops.
Applicable size shown in pictures.
Was $55 - Now $47.50
RCBS .45 ACP / AR / GAP Expander Die NIB
Was $15 - Now $12.50
SOLD - Hogue N Frame Round Butt MonoGrip with S&W logo.
Slightly used but very nice.
Includes mounting stirrup and screw.
I've had several of these through the years and had listed these grips as K/L square but but took a look at them and decided that they are for N round butt. (I tried them on my 617-0 and they wouldn't begin to go. Tried them on my 646 and they fit but were too big at the top.) I think they may have come off of a 5" 625-4 I sold a few years back.
Was $15 - Now $12.50
NIB Hogue Finger Groove 1911 Grip
Full size fame (GM or Commander)
Was $15 - Now $12.50
SOLD Hogue S&W 3rd Gen Compact .45 Grip (Have two)
For slide mounted decocker but I’m pretty sure will work on standard TDA / DAO pistols also.
NIB
Was $14 each or $25 for the pair - Now $12 each or $22 for pair
Wolff Fullsize .45 / 10mm 17# Recoil Spring (includes extra power firing pin spring) #47917
NIB
Was $6 - Now $5
Last edited:
