*Ad will be closing on Nov 7th*
Putting a few modified Delrin Chiefs Special CS9 grips up for sale, for those who may be interested. These were all made by myself and (unless otherwise stated) are unused. These are built for functionality over looks and will likely have a few minor marks from the process on the outer portions. The inside of the grips will look like someone's been at it with a Dremel.
A modified mainspring adapter is included with each grip set. A 3913 length grip pin is not provided, but is available from both S&W directly or at online retailers.
Prices include 1st Class USPS shipping to the lower 48, USPS Money Order or Paypal as acceptable payment. Please post an, "I'll take grip #_ ' followed by a PM.
Please PM me here with any other questions you may have. Discussion thread can be found here: (http://smith-wessonforum.com/smith-wesson-semi-auto-pistols/492932-modified-cs9-grips.html)
Now, about those grips:
1. (1st Gen)These are a lightly-used set of grips, my first successful set made IIRC. Tested out with no more than 200 rounds and never carried. These have an older fit that is not quite as good as the other grips I have to offer, but is still 100% serviceable. Mag catch area has been over-ground for clearance on these. The rear portion of the grips have a section of grip tape glued onto the factory checkering, which (in my experience) will last for years and offers superior traction. Factory checkering may be filed down underneath. $75
2. (2nd Gen)New production, made from an unknown used set of grips, these came to me partially modified by someone else, and I finished the job. As such, the inside looks a little uglier than most. A few minor bumps and dings on the outer portion, but an excellent, tight fit to the frame. $100
3. (2nd Gen)Made from a new set of 3913TSW pre-rail grips, the fit on these turned out great, but the bottom of the grips got cut a little high in one spot (see second pic). $100
4. SOLD (3rd Gen)The latest evolution of how I'm making these grips, fit is outstanding with a minor scuff or two. Made from current production factory grips, and the cut accommodates all 9mm base plates. SOLD
5. (3rd Gen)Just like #4 in gray, but these turned out cosmetically perfect, with a fantastic fit. $125
6. (3rd Gen) Another black set added with a very nice fit. Please see post below for picture. $125
Thank You!
Added Pics of #1 and #3.
Putting a few modified Delrin Chiefs Special CS9 grips up for sale, for those who may be interested. These were all made by myself and (unless otherwise stated) are unused. These are built for functionality over looks and will likely have a few minor marks from the process on the outer portions. The inside of the grips will look like someone's been at it with a Dremel.
A modified mainspring adapter is included with each grip set. A 3913 length grip pin is not provided, but is available from both S&W directly or at online retailers.
Prices include 1st Class USPS shipping to the lower 48, USPS Money Order or Paypal as acceptable payment. Please post an, "I'll take grip #_ ' followed by a PM.
Please PM me here with any other questions you may have. Discussion thread can be found here: (http://smith-wessonforum.com/smith-wesson-semi-auto-pistols/492932-modified-cs9-grips.html)
Now, about those grips:
1. (1st Gen)These are a lightly-used set of grips, my first successful set made IIRC. Tested out with no more than 200 rounds and never carried. These have an older fit that is not quite as good as the other grips I have to offer, but is still 100% serviceable. Mag catch area has been over-ground for clearance on these. The rear portion of the grips have a section of grip tape glued onto the factory checkering, which (in my experience) will last for years and offers superior traction. Factory checkering may be filed down underneath. $75
2. (2nd Gen)New production, made from an unknown used set of grips, these came to me partially modified by someone else, and I finished the job. As such, the inside looks a little uglier than most. A few minor bumps and dings on the outer portion, but an excellent, tight fit to the frame. $100
3. (2nd Gen)Made from a new set of 3913TSW pre-rail grips, the fit on these turned out great, but the bottom of the grips got cut a little high in one spot (see second pic). $100
4. SOLD (3rd Gen)The latest evolution of how I'm making these grips, fit is outstanding with a minor scuff or two. Made from current production factory grips, and the cut accommodates all 9mm base plates. SOLD
5. (3rd Gen)Just like #4 in gray, but these turned out cosmetically perfect, with a fantastic fit. $125
6. (3rd Gen) Another black set added with a very nice fit. Please see post below for picture. $125
Thank You!
Added Pics of #1 and #3.
Attachments
Last edited:
