revolver research for arthritic father.

[firecop019]

Hey guys, I really only have shot my own 342. It's light easy to carry and kicks like hell. Me I can handle it but my dad on the other hand can't. He got arthritis in his hands and the recoil from that little pocket rocket is just too much. I don't think even dropping it down to a 125gr round would do much for him. I even have the full Crimson Trace (405) grips and that even hurt him.

I'm wondering though if one of the steel framed j frames might be a little softer shooting. He can handle the trigger pull ok, it's just the harsh recoil that bothers him. I was going to have him look at the 36 or the new Night Guard .38. But if the recoil is about the same then I'll keep him looking at the M&P compacts.

Thanks for the help in advance.

 

[firecop019]

Hey guys, I really only have shot my own 342. It's light easy to carry and kicks like hell. Me I can handle it but my dad on the other hand can't. He got arthritis in his hands and the recoil from that little pocket rocket is just too much. I don't think even dropping it down to a 125gr round would do much for him. I even have the full Crimson Trace (405) grips and that even hurt him.

I'm wondering though if one of the steel framed j frames might be a little softer shooting. He can handle the trigger pull ok, it's just the harsh recoil that bothers him. I was going to have him look at the 36 or the new Night Guard .38. But if the recoil is about the same then I'll keep him looking at the M&P compacts.

Thanks for the help in advance.

 

[photoman]

Have him try a 640 with Winchester 110gr Silvertips or Federal 148gr wadcutters. Use a large, three finger grip.

If that doesn't work, I would step up to a 4" light barrel Model 10 or 64.

 

[jmorrell]

I think any J frame may kick too much for someone with arthritis in his hands. My Model 60 with Crimson Trace 305's kicks so bad in my 58 year old hands that I rarely shoot it (it's a nightstand gun only). I think a K or L frame would be a better choice for your father.

 

[Revolver King]

The 4" 686 with crimson trace grips really work well, very controlable.

 

[otis24]

Try a Ruger SP101. The added weight may dampen recoil and the factory grips are good. Even better if you add Trausch SP101 grips.

 

[HEADKNOCKER]

Realy it all depends what the revolver is going to be used for..
Concealed Carry?
House Gun?
Target Gun?
For Concealed Carry I'd Look into a M640
House or Range Gun could be anything with a 3"-6" Barrel
Also The grips need to be the Full Three finger type, Forget Boot Grips..
You'll Find something..
Good Luck in Your Quest!!

 

[431pd]

Of the so called compacts, I would recommend the SP101. It is a little heavier than the model 60s. Also, if necessary, drop down to the wadcutter target loads. They are pretty tame. They also cut a neat .358 hole.

I have arthritis in my thumbs and had to give up shooting autos as they drive the recoil right back into the thumb. Revolvers seem to place it more in the palm.

If size is not an issue look to a k or l frame.

 

[arfmel]

Model 10 or 12, 4" barrel. Much easier to use than the J frames.

 

[Texas Star]

Keep in mind that the Ruger cylinder release is easier to operate than the one on a Smith, if he has a problem with that.

T-Star

 

[Grayfox]

My wife had the same problem. We cured it with a Model 30 in .32 long. Ain't no power house, but she can shoot it without any problems and put 'em where they'll count.

 

[riptrack44]

All J frames are small, light and kick like a mule. I would suggest a K frame. Maybe a model 66 with some lighter (reloaded) bullets. My 686 snubbie (L frame) is very heavy but has very little recoil (at least for me). I think this is one of the reasons most used J frames are in excellent condition.

 

[Double-O-Dave]

I also have arthritis in both hands, as well as damage to my right (shooting) hand. I asked here and some forum members were kind enough to recommend a 432 PD in .32 H&R Magnum. I bought it and am delighted with it. Your father could shoot .32 Long if his hands bother him, or the .32 H&R Magnum if he is up to it. I have the Lasermax J frame grips on it and it shoots like a dream. It's light, compact, accurate, and soft shooting. I would love to buy a 642, but I don't think my hands could manage the recoil except perhaps I use 148gr. wadcutters. I am waiting to see what S&W does with the .327 Magnum in the J frame and will make my decision then.

Best of luck to you and your father.

Regards,

Dave

 

[firecop019]

thanks guys, i was thinking of pointing him towards one of those new .327 Federal guns.

i'll have to see if i can find a ruger for for him to try, i'm not really willing to put my full trust in a charter arms just yet.

 

[Double-O-Dave]

I just saw one of the Charter Arms in .327 Magnum - I wasn't impressed and would not buy one. I'm told the Ruger SP 101 is big, but shoots well. As you probably know, Ruger DA revolvers are brute strong, but a little on the bulky side. If it is primarily going to be a house gun for your dad, the Ruger would probably be fine. I am waiting to see what S&W does with the .327 in the J frame.

Best of luck,

Dave

 

[photoman]

Good luck finding a .327! From what I'm hearing, they are all but impossible to obtain. The ammo will be spendy too I'm guessing. I'd look for a .32 Magnum if the .38 Special is too much.

 

[David Kachel]

If he has arthritic hands that means loading is going to be problematic too.
Perhaps consider the Jframe that takes 9mm Luger (don't recall the model number). IIRC this model takes moon clips so loading and reloading will be much easier and recoil should be fairly mild (? owners please jump in).

 

[Marshal Tom]

You may also want to consider a .22magnum in the 351PD. Very light but no recoil. Nasty little cartridge. It is not ideal but quite effective as an alternative to something larger.

T

 

[Spotteddog]

Is the gun intended for "carry" or "home defense"? For H/D, I'd go a K or L in a 3" or 4" with large covered back strap grips. For carry, a 640 as weight floor. The SP101 has enough mass to be helpful. A .38 only gun isn't going to be a drawback for this specific application, seems to me?

 

[38-44HD45]

Lots of good suggestions above. To the original point, steel framed Js recoil LOTS less than 342s. I have two 342Tis, and I know exactly what you mean; they are among the hardest of all my handguns to shoot well, and among the least enjoyable.

An SP-101, especially in .327, would be good. I recently shot one of the new .327s, and recoil is very mild, although muzzle blast is a bitch. The DA trigger was atrocious, but that is easily fixed.

If he's not going to carry it, he'll be better served by a K or L frame gun, as mentioned by others here. I managed to find a 4" Model 48 (K-frame .22 mag.) for a friend whose father has badly arthritic hands, and it has worked out very well for the old fellow.