S&W M&P 15 22 Trigger

[wmuench]

Are there any drop-in trigger kits for the 15 22, similiar to the Timney units ?? tia

 

[Majorlk]

Are there any drop-in trigger kits for the 15 22, similiar to the Timney units ?? tia

Any AR-15 FCG will fit in the 15-22. Be aware, however, that the lower is polymer and not aluminum so drop-in modules like the Timney will most likely need a metal shim below them for the holding screws to bear against or the KNS trigger and hammer pins to keep it in place.

 

[yugowego]

ALG Defense makes some nice cleaned up MILSPEC triggers... Best of the best is Geissele...I personally run Geissele in all my ARs and 15-22.

 

[yugowego]

Any AR-15 FCG will fit in the 15-22. Be aware, however, that the lower is polymer and not aluminum so drop-in modules like the Timney will most likely need a metal shim below them for the holding screws to bear against or the KNS trigger and hammer pins to keep it in place.

+1... There are at least a couple guys here that learned the "hard" way...

 

[Dikinalaska]

I'd say I learned the hard way. Ended up going with the anti-walk pins because it was ten times easier IMO than messing with trying to move the spring legs out of the way while trying to get the tiny Allen wrench past them to get to the set screws underneath.

 

[Scandalous Yandellus]

I just put a Jard adjustable trigger in mine. Its not a drop in but it can be fine tuned exactly how you want it and it comes with a plate that locks your pins in position so they don't walk on you. Did a full mag dump on my first attempt with my slide fire stock. Awsome trigger!

 

[photoracer]

I prefer a Geissele Super 3-Gun and my alternate is a RRA NM 2 stage w/JP low power springs, even though the RRA does not have the short reset length and lock time you need for speed shooting like the S3G.