Show off your M & P revolvers (pre-10's)

[1blindref]

This one shipped in August 1953

this one shipped May 25th 1942

 

[pokute]

My 32 with Wondersight

Hi folks, this is my first post in this forum. I have two old Smiths, with one more "on the way". Here's my 32 (1919), plus a close-up of the Wondersight:

http://www.imbe.net/~phil/revolvers/sw-32_right-side_02.jpg

http://www.imbe.net/~phil/revolvers/wonder-sight.jpg

 

[AirCommando]

Welcome!

Nice revolver! Great 1st post!

 

[finaltoy]

Show pre model 10

My 1910 Hand Eject .38Spl. in nickel.

 

[Black_Sheep]

I just got this 5" .38 M&P on Monday so I have not fired it yet. Based on the serial number it was made around 1950...

 

[e6bill]

Here's mine. WWII export to New Zealand, has NZ numbers stamped on the backstrap. Barrel shortened slightly, also the hammer tab was broken off in a slight accident long ago. Now DA only. Still looking for a correct replacement hammer and block.

 

[bananaman]

1blindref, I am not a snub nose kind of guy, but yours is beautiful! My birth year too! Bob

 

[bananaman]

pokute, how do you like your Wondersight? I have thought about 1 for my 1919 6" .38 M&P. I am getting old, and my eyes need all the help they can get! Bob

 

[CajunBass]

I've got a couple.

Made in 1947/48

Looks like 55/56 for this one.

I put this one on layaway yesterday. Another 55/56, with a 2" barrel, diamond magna grips, instruction sheet, and box (numbered to the gun). There is a slight turn line, and no other wear that I can see. A very poor cell phone picture.

Normally I don't care for 2" barrel guns, but this one was too nice to pass up.

 

[10/22]

Vintage 1920-21 4th Change

I've posted this on the forum before, but beauty bears repeating. Insides are even better. Grips number to gun.
10/22.

 

[CptCurl]

Nobody can claim to be a collector of S&W revolvers unless there's an M&P in the group. Here's my 5" pre-10, one that can't really be called an M&P because it's neither "M" nor "P". The fact is, it's "SQ" - Safe Queen! It's basically new in the box.

 

[photoman]

This one followed me home today. Best I can tell, it's somewhere between 1920 and 1922. Can anyone narrow that down? The serial number is 303xxx.

 

[bananaman]

photoman, I have 2996xx, that was shipped from Smith in June of 1919 according to Roy Jinks. At the rate these were being made, you could be 1919 also. Bob

 

[Dennis S]

Here is my 2 inch from 1947.

 

[450 racer]

her is mine it was my first smith the best I can figure it is from 1939 1940

 

[TAROMAN]

From 1947, same as me, and its no "safe queen":

 

[Black_Sheep]

Here's better pictures of the M&P I picked up last Monday...

 

[DCWilson]

Here is my 2 inch from 1947.

I sort of like any snubnose .38 on the K frame, but I have a particular affection for the postwar long-action specimens. Something about the round top front sight and hammer profile really say "classic" to me. My 1947 snub is way back there in post 29 on this thread.

 

[z4lunch]

M&P

Steve here... found this late 40's i think.. 5 screw(serial # C 234xx) in the factory gold box at my local Cabelas the other day. Has some poor storage rust and the wrong grips, but it WAS unfired, til today

 

[finaltoy]

Pre Model 10

1910 Hand Eject M&P .38 Spl. Nickel.
Awaiting letter of authenticity from Smith & Wesson.

 

[cm289]

Here are some pics of mine with and w/o flash- I bought it and quite a few other really nice guns from a widow who was parting with her husband's collection in 2009. I haven't got around to sending off for its history, so I'm not sure when she was built- serial# is 252XXX.

 

[DCWilson]

cm289, that's a nice one. The serial number puts it in 1915, maybe 1916.

Daniel, I like that snubby in your picasa album.

 

[z4lunch]

'49 5 screw

Here is a pic of my new to me M&P I picked up last week, with the proper shoes.
Steve

 

[boatbum101]

Okay I'll play . I've posted these before but if it'll help we'll do it again .
1) .32-20 Hand Ejector Model 1905 4th change
2) 38 special M&P also a 1905 4th change
3) 38 special M&P Target Model also 1905 4th change
4) 38 special post war transition S prefix M&P

 

[above_all]

My New "Old" Pre-Model 10

After looking at the previous guns, I know this ain't so pretty. But, here it is.

Looks better in person. Didn't have any indirect light; had to use the flash. And the danged flash shows every bit of character.

Yep, at some point in the past, someone bobbed the hammer. Previous owner said the original grips had been sanded down when he got it and he lost them. Other than that, it's very nice. Doesn't appear to have been re-blued. Slight patina on the backstrap. Some holster wear on the high points. Bore is clean and lockup is tight.

This is going to be a shooter and worked into my carry rotation after I push some rounds downrange. Anyone have any suggestions on where I can get some period diamond grips?

 

[Retired W4]

I really like Mr. Wilson's comments. That being said, hear is my favorite M&P (pre-10), mostly because it is a birth year gun that happens to be a nice old .38 special.

 

[LOBO]

Steve here... found this late 40's i think.. 5 screw(serial # C 234xx) in the factory gold box at my local Cabelas the other day. Has some poor storage rust and the wrong grips, but it WAS unfired, til today

Via the 3rd Edition of the SC of S&W, the serial numbers C1-C223998 are given dates of manufacture as being 1948-1953.

 

[LOBO]

I sort of like any snubnose .38 on the K frame, but I have a particular affection for the postwar long-action specimens. Something about the round top front sight and hammer profile really say "classic" to me.

It's like you read my mind.

 

[crsides]

1956 four screw original nickel. Grips are from a 1953 K22 buy.
I am liking the semi bobbed hammer.

Charlie

 

[kdailey]