sigma takedown guide

Register to hide this ad
There's one you can download from the Smith & Wesson website but they're timing-out on me right now, so I can't get the link.

You can also download one Here or Here .
 
Greetings,
Taking down a Sigma is super easy. Make sure the mag is out, chamber empty, pull the trigger, press the buttons and the slide goes off forward. Thats it.
 
kinda sad to say, but go to you tube and look up glock disassembly, its almost identicle
 
Originally posted by vanya:
Greetings,
Taking down a Sigma is super easy. Make sure the mag is out, chamber empty, pull the trigger, press the buttons and the slide goes off forward. Thats it.

Are you pressing inward or down?
 
Originally posted by vanya:
Greetings,
Taking down a Sigma is super easy. Make sure the mag is out, chamber empty, pull the trigger, press the buttons and the slide goes off forward. Thats it.

You've missed a few steps here...
 
Originally posted by shotgun131313:
where can i find a takedown guide for a sigma 40ve ?radocy does not list one

Go to the S&W factory web site and look up the instruction manuals. They are all on there and can be viewed on line or printed out.
 
Also,just go to UTUBE and type in Sigma field strip, and you will see at least two very good examples.
 
Originally posted by netspec:
Originally posted by vanya:
Greetings,
Taking down a Sigma is super easy. Make sure the mag is out, chamber empty, pull the trigger, press the buttons and the slide goes off forward. Thats it.

Are you pressing inward or down?

Downward. Once the trigger is pulled, you pull the slide back about an 1/8". Then pull down on the slide releases that are found on both sides of the gun.

As previous stated, there are good videos of this on utube.
 
Back
Top