So what's the big deal about 1911's?++ S&W Pic Added!

[40cal]

Remington Arms 1911 R1

But as long as a person carries a 1911 in .45acp, they shall fear no evil, for they are protected, no matter what brand.

Brand new 1911 .45 made in the USA, modest price. Cocked & Locked protection.

[/IMG]

 

[oldman45]

Brand new 1911 .45 made in the USA, modest price. Cocked & Locked protection.

And a mighty nice looking one.

 

[rimfired]

I still don't like'em. I'd rather have a claymore strapped to my chest with the "this side toward enemy" side pointing
away from me. Anybody believe that?

 

[Cyrano]

I have a Colt and Springfield 1911; a Colt, Rem-Rand and Ithaca 1911 and a slightly tricked out Series 70, which is my go-to gun. I've shot on an Army pistol team so have put a lot of 45 rounds down range. A wonderful design, unbelievably reliable. Heavy enough to take your pants off when worn on the belt. Has ergonomic problems that probably weren't considered in 1911: The grip angle is too close to 90º, the grip itself is too big for all except a large hand and the trigger reach, even with the short trigger, is a little long. The hammer pinches against the grip safety, unless you have an extremely thin hand (Most of the finish on the back of the grip of my target 45 is gone: blood being warm, salty and wet really takes off the blueing quickly). The recoil is pretty stiff for someone who isn't an experienced pistol shooter, and it takes too long to train someone to shoot it well when a war starts.

 

[Kanewpadle]

Being fair, I have a Dan Wesson 1911 and a couple Wesson revolvers.

While they are really good guns and I would not hesitate to carry my DW 1911, it does not come close to comparing to the S&W 1911 guns I got this year. I own over 100 handguns and have some of the best customs money can buy but not a one reaches the level of either of my S&W 1911 from the PC or the factory S&W.

But as long as a person carries a 1911 in .45acp, they shall fear no evil, for they are protected, no matter what brand.

Yes, as long as it's a quality 1911 that works like it should.

 

[ditrina]

Getting ready for a 1500 mile road trip in the AM.. Slipped the SIG 9mm outta the briefcase.. and in went the CDP Ultra Carry.. .45ACP, secure in an El Paso Saddlery Rig. ..

1911.. when it absolutely.. positively has to be stopped DEAD in it's tracks

 

[GatorFarmer]

Colts - which tend to hold their value well, and boutique makers are probably the way to go for anyone that wants one. Most decent pistols that work cost about a grand these days for anything upper tier, so they really aren't any more than any other design.

Kimber and S&W... eh. The series II Kimbers with their schwartz style safeties of MIM parts were complained about by those in to such things.

My Series left the factory when I was 4 years old. I probably ought wrap the grips with friction tape to improve the grip, otherwise... eh.

Polymer and doublestack, and I think even polymer double stack, 1911 type guns have been available on and off for years.

The Colt SAA circa 1873 and its cap and ball forerunners are all still in production and older than the 1911s. Mauser 1898 actions have also stood the test of time.

 

[OIF2]

I guess I like them. The one I'm shooting (Iraq, 2004) is a WWII Rem Rand I borrowed from a Blackhawk dude. The Gold Cup Trophy is stock (not accurized). The next one is a Colt 1911 WWI repro. Beautiful pistol. Last is my Hoag-accurized bullseye service pistol. You can never have too many .45s.
Bob

 

[Bat Guano]

Shot my first one as a teenager in 1959--a DCM Remington Rand. Still have it (and a few others). Since I was still in my formative years I think my hand adapted to the gun.

When I actually find something better than a 1911, mark it sold.

 

[Rule3]

"I'm gonna buy a stock Ruger 10/22"

Let's see now - ummmh - Ruger 10/22 or 1911 ? Ruger 10/22 or 1911 ?? Why am I bothering to reply

Just yanking your chain. Folks buy a 10/22 for $150 and end up putting $2000 in after markets parts into them.

 

[HOUSTON RICK]

"So what's the big deal about 1911's?"

1911's are almost as good as a 4506 and only cost three times as much.

 

[G-Mac]

If you want a 1911 you buy a COLT 5" barrel.

I have a steel-framed Colt Combat Commander (4.25" barrel) and a Springfield Stainless Mil-Spec (5" barrel).

You just ruined my day...I thought that I was a 1911 owner.

I do see your point though...

 

[Vadermedic]

I'm an owner of a Sig 1911, SW&W 1911 and a sig P220. Thought for a long time that my P220 was the greatest thing since sliced bread. Carried it over seas while deployed for Desert Storm and Provide Comfort. Recently over last year purchased the 2 1911's and love them. If faced in combat though, would probably take the Sig, just because of familiarity and ease of field stripping. My S&W 1911 under $800, & shoots perfect.

 

[Joe in SC]

1911's are not a beginners handgun unless they are dedicated to learning the manual of arms specific to this pistol. I have seen many first time owners dismiss their 1911 as defective when all it needed was to be properly broken in or simply not be limp wristed while firing.

Kimber raised the bar for all 1911 manufacturers when they introduced their line of 1911's ! They were the first to mass produce pistols using superior CNC machine tooling techniques. Colt was doing business as usual, not concentrating on civilian markets, allowing custom pistolsmiths to correct their faults for high cost to the consumers. Other makers of the time were also asleep at the wheel and like Colt were taken by surprise when Kimber slipped on the scene.

Since that time, when Kimber woke up the rest of the manufacturers, everybody that makes em' has be trying to catch up. Now you can buy several different brands of 1911's for 6 bills or less that are reliable and more accurate than the average handgunner can potentially utilize.

Out of curiousity I bought one of the first Tarus 1911's that hit our area. I bought it on SC's tax free days around Thanksgiving and paid 465 out the door. At the time I owned a Les Baer Primier II and a Kimber Stainless Gold Match, both of which are exceedingly accurate, reliable pistols. The Taurus cost a little less than half the purchase price of the Kimber and about a forth the price of the Baer. It functioned 100% reliable out of the box, was match accurate and was fairly well finished, considering the price.

Earlier this year I fired a Para Expert that is currently available on GunsAmerica for 539 + shipping and fees that will satisfy even a seasoned 1911 fan. Accurate, well finished and available. As far as I know is MADE IN THE USA.

Again, 1911's are not for everyone, but if you are SERIOUS about self defense and willing to invest the training time, the 1911 can not be beat, equalled perhaps, but not beat by a handgun of any design or brand, for the purpose for which it was designed 100 years ago. And that's a fact Jack!!! I'd bet my life on it!

 

[vrichard]

The Colt with the Sid Bell grips is 1967,I bought it in 1968,I`m thinking
of shooting it someday.(still new with box)
Dick

 

[keith44spl]

Well Boys, a 1911 just suits me right down to the ground...

Su Amigo,
Dave

 

[gizamo]

Ok, folks....

I'm a 1911 addict. I've got more 1911's than S&W's....

I can't help myself - doesn't matter brand, size, caliber, or finish. Flash one in front of my eyes and you'll get the Pavlov effect.

 

[Cocked & Locked]

Cocked & Locked

My forum name kinda says it for me I reckon.

 

[DeadAye]

1911s are obsolete!
45 ACP is obsolete!
What you need is to get rid of those obsolete guns and get you a nice new S&W Bodyguard - Or some other piece of modern (not obsolete) junk -------- I mean modern wonderful firearms - Yep, that's what I meant.

I volunteer to help you out (it's a Tennessee thing).
Contact me off site and I'll give you my FFLs address to ship your old (or new - new's not a problem) obsolete gun(s) to. Don't forget to include $10 for the transfer fee - Cash is fine. No need to thank me - I LOVE being helpful.

My only 1911 isn't a 1911 --- It's a Colt Commander. Obsolete, like me, but I can take it.

Them's some fine pictures of some fine obsolete pistols, btw!

 

[Frailer]

1911s are beautiful things, both in form and function. Whenever I see one for sale--whether it's a plain Jane GI model or a fully tricked-out competition gun--I'm always tempted to buy it.

But I never do. I'm J-frame kinda guy.

 

[jed]

Ruger 10/22

If you buy one make certain that it is not loaded up with plastic parts.
Check out RimfireCentral.com - Rimfire Community! for every thing you want to know or need to know about 10/22 rifles.

I have a 1911 C3 Sig 45. It has been flawless. Buy used if possible as new ones are quite expensive.

jed

 

[Rule3]

Well Boys, a 1911 just suits me right down to the ground...

Su Amigo,
Dave

Only one??? I know I have seen some of your fine pictures with boatloads of them(or is it pack mules loads?)

 

[El_Jefe]

I had a colt commander for a while. Wouldn't trust my life with it, even after two trips back to the factory for tuning. I sold it

 

[El_Jefe]

Only one??? I know I have seen some of your fine pictures with boatloads of them(or is it pack mules loads?)

That is beautiful leather.

 

[ElToro]

lovely leather C&L and Keith 44

if its not a Colt its a copy
heres my meager stable of 1911s all Colt. i sold a kimber that i didnt like. the stainless is a Delta, the blue commander is a lightweight the parked commdaner is a 1991, the 2 full size with wood grips are series 80 and the blue with rubber is a "Special Combat" 1 of 500. ALl bought previously loved, i didnt put the idiot scratch on the ones were its evident.
all run really well. i want to send one back to Colts for their Model O package. The Yankee Fist

 

[wbraswell]

I have a bright nickel 70 series Government Model that I bought at a show about 30 years ago. It has a throated barrel, maybe a little trigger work, and aftermarket sights. That's all you really need.(and quality magazines) I love the gun, but I don't think it's a natural pointer. It is a gun that one needs to learn how to use and hold. I used to carry mine in the truck, but no more. It's just too valuable. The basic 1911 is kind of like a 1955 Chevy, it's a classic design, and you can customize and hot rod any part of it. Most of that stuff is just personal fluff.

 

[ladder13]

A 1911 is a Colt, pure and simple, everything else is a copy. Yes, I own 1911's and also copies.

 

[galena]

...after being the number one choice of those that go in harm's way for the last 100 years, if you have to ask...well...

Right on MOONDAWG. You said everything that needs to be said! If you've been there, you just know.

 

[keith44spl]

Pack Mule Load...

Only one??? I know I have seen some of your fine pictures with boatloads of them(or is it pack mules loads?)

*
*
*
*
Sometimes folks can't rightly tell if'n I'm a revolver man or just a cranky ol' pistolero!

Not all Colts, but by dabs they'll do...

Su Amigo,
Dave

 

[Gary]

I have 5. A 70s vintage Combat Commander, and Goverment Model Colts, an early NM Springfield, and a couple of Norincos. The Commander is stock. The rest have had varing degrees of alteration to suit me. The Norincos have both been extensively reworked. Part of the magic of the 1911 is that they can be modified to fit a shooters needs. They are a tinkers dream with an almost unlimited of enhanced parts and accessories. There is also a large group of gunsmiths that are willing to build you any type of gun that you want. I like a firearms related project as much as I like to shoot. 1911s fit the bill nicely.