I have been using an ultrasonic cleaner for SxS shotguns for years. I use 4 parts water to 1 part LA’s totally awesome from the dollar store . Did my 1st 2 revolvers yesterday. Rinse with hot water and blow dry with compressed air.
Ultrasonic Cleaner Question
- Thread starter AJ
- Start date
For small gun parts, WD-40. I use a small plastic container filled with WD-40 so as not to contaminated the tank.
I would not use vinegar on any firearm.
It is very acidic with a pH of 2 to 3 and may be a little too corrosive.
I use Simple Green on lots of stuff and buy it by the gallon jug.
That's just my worthless opinion.
It is very acidic with a pH of 2 to 3 and may be a little too corrosive.
I use Simple Green on lots of stuff and buy it by the gallon jug.
That's just my worthless opinion.
Always read the label for ingredients of the solvent used in the ultrasonic. Phosphoric acid is bad for steel, it will remove the blue, Sodium hydroxide is bad for aluminum parts, it will remove the anodize finish and etch polished parts. Ask me how I know? You almost need two different ultrasonic cleaners. I use a sodium hydroxide based engine cleaner I get from AutoZone in my ultrasonic cleaner for steel parts but lesson learned, I don't put aluminum framed firearms in it. Aluminum framed guns/parts get the brake cleaner and tooth brush treatment.I would not use vinegar on any firearm.
It is very acidic with a pH of 2 to 3 and may be a little too corrosive.
I use Simple Green on lots of stuff and buy it by the gallon jug.
That's just my worthless opinion.
kilroy2721
Member
That is my biggest problem and why I have not yet bought one. The idea of throwing my gun into water really bothers me.
I’ve had good results using an ultrasonic cleaning system for my revolver parts, but I always completely disassemble first. I learned early on that not removing certain parts can trap moisture in places you can’t see, like under the side plate. After cleaning, I use compressed air and let everything dry before oiling. The ultrasonic cleaning system saves time, especially on carbon buildup.
Similar threads
