Unknown Model

[justino04]

Good Morning,


This is my first post of many to come. I read the sticky of what to submit for identification.I found this at a local pawn shop. So here I go.


1. Hand ejector
2. 67193
3. 38 S&W Special CTG
4. Roughly 3 inches
5. Fixed sights


The firearm is black and top of the barrel is hashed marked and the hammer and trigger are almost an etch appearance. Thank you for your help.

 

[s&wchad]

Welcome aboard!
I moved this to the S&W Hand Ejectors: 1896 to 1961 section.
Does it hold 5 or 6 shots?

Video Tutorials on Posting Pictures

 

[Hawg Rider]

Welcome to the Forum! Please read and follow the link that s&wchad posted about posting pictures. As they say, pictures are worth a thousand words, and they greatly assist the Forum's members with identifying your revolver.

 

[Inusuit]

Pictures needed for this one. Disclaimer, I'm not good with early Smiths. Based only on the serial number, it could be a .38 Military & Police Model of 1905 (.38 M&P, 3rd Model) according to the Standard Catalog of Smith & Wesson, 4th Edition. I don't know about the "hashed marked" barrel or the "etch appearance" of the hammer and trigger. Hammer and trigger would have been color case hardened, I think.

Barrel is measured from the muzzle to the front of the cylinder. Should be 4 inches unless it has been cut.

I will now stand back and wait for others who know more than I do to chime in.

Welcome to the forum, one of the best on the internet for good people and solid information.

 

[Wiregrassguy]

Welcome to the forums from the cotton and peanut covered plains of the Wiregrass! Did the 67193 in #2 come from the yoke cut or the butt of the gun? If the gun is in your possession, please post pictures.

Does it look something like this one?

 

[mikepriwer]

A 4" .38 M&P measures 3 1/8" from the end of the muzzle to the front of the frame, where the barrel meets the frame.

Mike Priwer