OP
Pigirondan
Member
No problem. Also did 25 rounds using the same bullet but with an increase to 5.0 grains of Unique. I found it to be more accurate than the 4.7 grain load.
Wadcutters, hollow base or double end?
- Thread starter Pigirondan
- Start date
No problem. Also did 25 rounds using the same bullet but with an increase to 5.0 grains of Unique. I found it to be more accurate than the 4.7 grain load.
bluetopper
Member
I also like double ended wadcutters with 12gr of 2400 behind them in 357 cases.
15gr of AA4100 powder behind them is awesome too.
And 6.2gr of Universal is a good stout target load in 357 cases.
Of course you need wadcutters with a brinell hardness of 17 or 18.
15gr of AA4100 powder behind them is awesome too.
And 6.2gr of Universal is a good stout target load in 357 cases.
Of course you need wadcutters with a brinell hardness of 17 or 18.
Dale53
Member
I use the H&G #251 dbl ended W/C ahead of 3.5 grs of Bullseye. I taper crimp on the tail end of the first band (nearly all of the band is outside the case). Here is what I have done, standing at 25 yards, so loaded:
Dale53
Dale53
Similar threads
