R rmack Member Joined Sep 11, 2010 Messages 59 Reaction score 2 Location idaho Aug 14, 2012 #1 i have a 4 inch 617-1 that i want to replace the front sight with a SDM gold bead. i measured mine and it looks to be between 1/4 and 5/16 of an inch which would be around .300. would that be the correct one?
i have a 4 inch 617-1 that i want to replace the front sight with a SDM gold bead. i measured mine and it looks to be between 1/4 and 5/16 of an inch which would be around .300. would that be the correct one?
G GLV US Veteran Joined Aug 18, 2004 Messages 640 Reaction score 167 Location Indiana Aug 15, 2012 #2 Not sure how you measured, but with adjustable rear halfway, you should have lots of room for adjustment. Be sure you are measuring the same way as the sight you are going to buy, is measured.
Not sure how you measured, but with adjustable rear halfway, you should have lots of room for adjustment. Be sure you are measuring the same way as the sight you are going to buy, is measured.
OP R rmack Member Joined Sep 11, 2010 Messages 59 Reaction score 2 Location idaho Aug 16, 2012 #3 thanks for the reply. I measured from the top of the sight to the top of the base. is that correct?
