Scratched up barrel on brand new 15-22!!

U

uniquesnd

Member
Joined
Feb 26, 2013
Messages
35
Reaction score
1
So I just purchased a brand new M&P 15-22 the other day for 439$ unthreaded model and when i got it home and pulled it out of the box there were long scratches running up and down the barrel horizontally! Is this because they are pumping them out as fast as they can and QC is slipping or is my rifle just a fluke? I know a gun is just a tool but i take care of my tools and one of the scratches is through the bluing and i can see some silver!:eek:
 
Register to hide this ad
Mine had this too, I had to send it back for a squib load and case rupture, I asked if they could just replaced the barrel and they did.
 
I don't know if that Blue will match up. I installed a threaded barrel adapter on the end of my unthreaded barrel and then installed a Bird cage flash hider. The finish on the flash hider was horrible and I sprayed it with some Brownells Teflon Moly oven cure gun finish. Of course I didn't bake it on. It matched up really nice. I've used this stuff to touch up nicks and ring marks on matte finish scopes and touch up scratches on matte guns. Item # 083-048-801. I used it to refinish an old mauser that I was fixing up and I didn't think it was very durable after I had baked it on. Seems to just work better to touch up stuff without baking.

Brant
 
Our stores here in Louisiana make sure you inspect it before you take possession, as there is no returning a gun. Then they put it back in the box and walk you out of the store, while they carry it, to your vehicle.
 
uniquesnd said:
So I just purchased a brand new M&P 15-22 the other day for 439$ unthreaded model and when i got it home and pulled it out of the box there were long scratches running up and down the barrel horizontally! Is this because they are pumping them out as fast as they can and QC is slipping or is my rifle just a fluke? I know a gun is just a tool but i take care of my tools and one of the scratches is through the bluing and i can see some silver!:eek:
Click to expand...

One of mine was scratched up, and it had other more serious probs, sent it back to get fixed, truth is that surface coating on the barrel scratches easy, i cleaned the barrel on the inside of the hand rail with a piece of cotton rag and a barrel rod, the little aluminum connector that i attached the plastic 22 jig to, scracthed it with no effort.
 
I would have inspected it but the store closed at 6 and I was there at 5:50 doing the background check they locked the door on me as I was paying for it so I rushed out of there so they could get home! My mistake
 
uniquesnd said:
I would have inspected it but the store closed at 6 and I was there at 5:50 doing the background check they locked the door on me as I was paying for it so I rushed out of there so they could get home! My mistake
Click to expand...

You seem like a nice guy. Easy to get rushed when we think others are waiting on us. However, it's a mistake you're not likely to make again.
 
uniquesnd said:
I would have inspected it but the store closed at 6 and I was there at 5:50 doing the background check they locked the door on me as I was paying for it so I rushed out of there so they could get home! My mistake
Click to expand...

You were in there making the transaction. They would've waited on you. Locking the doors is only to keep new customers out so they can focus on closing. Well, lesson learned. Good luck on getting those scratches taken care of. ;)
 
Your right lesson learned for sure! Now if i put on the barrel shroud from tacticool does it affect the accuracy? I would like to find one of the stainless steel looking shrouds that are ported on the end. seen them in a few picks but cant find who makes them!
 
Majorlk said:
NEVER go out the door without a close inspection, including opening the action and basic field strip. If the dealer objects, pick up you money and walk out the door.
Click to expand...

I agree. If they don't like it,there is "usually" something amiss. I have found broken firing pins along with other odds and ends. First time I did that at a few shops they about freaked out. Also a good way to tell if the person knows what they are talking about behind the counter. Now,it's no big deal and "most" of the time people will do it or a good dealer will too,so some one can't pull a fast one back on them.
 
I bought my oldest grandson a 15-22 for his 16th birthday. It was bought from a dealer in Augusta, Georgia. When they opened the box, there was no magazine. The dealer said S&W must have forgotten to put on in the box. My son told him what he thought of that possibility and the dealer "found" a magazine in the back room. :)
 
You must log in or register to reply here.

Similar threads

G
BFS AR-C1 Binary in 15-22 issues
Replies
1
Views
184
MattinSC
MattinSC
Shotguncoach
HomeSmith TrainWreck: Summer of 67
2
Replies
26
Views
1K
Marksman
M
M
  • Locked
Sold/Withdrawn **SOLD** Smith & Wesson Revolvers for Sale/Trade model 15 & model 15-4 PPC
Replies
3
Views
1K
629 3inch
6
O
Starting from scratch.
2
Replies
30
Views
2K
Mercury
Mercury
B
New Mountain Guns
Replies
8
Views
735
Gas tube
G

Latest posts

Back
Top