I go out towards the take down lever as the hole on the right side seems smaller than the pin on my gun and won't go through without beating the **** out of it like he did... It comes out right to left pretty easily... Haven't noticed a difference on the rear.
M&P22 Safety Plug v2 - kits for sale!
- Thread starter jobiin
- Start date
I go out towards the take down lever as the hole on the right side seems smaller than the pin on my gun and won't go through without beating the **** out of it like he did... It comes out right to left pretty easily... Haven't noticed a difference on the rear.
I confirm that's it's best to remove both pins going from right to left, when the back of the gun is facing towards you. I noticed that the left side of the rear pin's end may be slightly flared. Also, use a couple of small rubber bands to wrap around the front of the barrel/frame and rear assembly/frame before punching out the two pins. This will help keep parts from popping out as you punch out the rear pin. Lastly, I highly recommend reading the new instructions carefully before starting this project. It will help you to better understand and follow the procedure. Thanks to jobiin for putting together a great aftermarket product for the M&P 22. It definitely has improved the looks and operation of my pistol. Consider me now a happy camper.
Last edited:
They are wedged in. It's a tight fit - some sanding might be required. I make them .02mm wider than the frame so it's snug.
I lost count of how many rounds after a good dozen boxes of 550 and they haven't fallen out yet.
You might also consider adding a little dab of clear adhesive to help keep them in place. I used clear, non-permanent, adhesive that's safe for plastics.
Last edited:
I took mine back apart to check something and now after reassembling the gun it will not reset the trigger after each round. It ejects the spent casing OK but doesn't reset. If I manually eject the next unfired round the next bullet fires OK. Not sure if something is broke or missing.
Field strip it and check the hammer. Is it under spring tension? I ran into this issue as well when first prototyping everything and it ended up being the hammer rod thing wasn't set into the spring in the frame.
Field strip and decock hammer. Pull trigger and hold it back. Press in the little nub by the screwdriver in the photo. If it doesn't make a little pop sound and the sear drops back forward, you are either missing the little spring from a few posts back like that other guy, or the other reset bits are out of wack... You didn't take the Philips screws out of the frame did you?
Attachments
It's a cool idea, and it amazes me that we can buy 3D printers now and create anything we can dream up.
But my hat's off to jobiin, who is in for a lot of work and headaches implementing this cool little product. It seems like a ton of stress and liability. I mean the product can be as simple and common sense as possible, but IF someone shoots their foot with a modified M&P22, you can bet jobiin will be getting a letter from an attorney.
And attorneys don't listen to common sense.
What they like to do is take things to court, because that's where they get paid. Then you have to hire your own attorney who will get paid up front.
Good luck my friend. Great idea, looks beautiful too. Please stay safe!
But my hat's off to jobiin, who is in for a lot of work and headaches implementing this cool little product. It seems like a ton of stress and liability. I mean the product can be as simple and common sense as possible, but IF someone shoots their foot with a modified M&P22, you can bet jobiin will be getting a letter from an attorney.
And attorneys don't listen to common sense.
What they like to do is take things to court, because that's where they get paid. Then you have to hire your own attorney who will get paid up front.
Good luck my friend. Great idea, looks beautiful too. Please stay safe!
CoolComputerGuy
Member
- Joined
- Mar 3, 2013
- Messages
- 6
- Reaction score
- 0
Just got mine back from the gunsmith. Cost me $40 in stupid tax 
but he was able to get the plugs installed and the gun back together 
This picture shows some of the damage I did trying to remove the pins. Damage is purely cosmetic but drove me nuts (OCD I guess) so I sold the gun.
Time to order another set of plugs
This time I will pay to have them installed
but he was able to get the plugs installed and the gun back together This picture shows some of the damage I did trying to remove the pins. Damage is purely cosmetic but drove me nuts (OCD I guess) so I sold the gun. Time to order another set of plugs
This time I will pay to have them installed
Attachments
Just got mine back from the gunsmith. Cost me $40 in stupid tax
Time to order another set of plugs
This time I will pay to have them installed
Before you buy another set of plugs, email me at [email protected]. I'll just send them out to you. Also, we can talk about you sending the gun to my local FFL
I hope mine were included
I hope so too! Ha. Everyone's username doesn't match their real name, so I have no idea who ordered what.
bolewine
Member
How bout me were mine shipped haven't seen them yet?
All of the orders I've gotten have been shipped. If you haven't received one yet, and it's been over a week, email me with your name and address and I will look to see when it was sent.
[email protected]
[email protected]
Similar threads
