Best Fitting Butt Stock?

[team sidewinder]

I used black electrical tape as a quick fix while I figured out a solution for the stock. In the end I gave up looking as the tape worked wonders.

Now im rocking a slidw fire and it is looser then well some things I cant say here. But boy is it cool.

I agree. If once at the length that fits me I don't care if the stock is adjustable or not as long as the slop is out. Nobody shoots my gun but me. Electrical tape works great.

 

[StobleCL]

Thanks Micocyco for the velcro idea. Great idea!

 

[xjnewbi]

Mine had too much play for my liking as well. I went with the Magpul CTR which locks down nice and snug. My wonderful lawmakers see to it that my stock cannot be adjustable and it must be pinned. Since it was going to be done once and set for quite some time, I wanted the friction lock for a little extra stability.

Oddly enough, even though the OEM stock was pinned by my FFL dealer before I could take posession, it still had quite a bit of slop in it (wiggled side to side)

 

[peterdeb]

Black electrical tape, 4-2inch strips works just fine. Nice and tight and still can adjust in case the wife and son want to shoot.

 

[photoracer]

Mine had too much play for my liking as well. I went with the Magpul CTR which locks down nice and snug. My wonderful lawmakers see to it that my stock cannot be adjustable and it must be pinned. Since it was going to be done once and set for quite some time, I wanted the friction lock for a little extra stability.

Oddly enough, even though the OEM stock was pinned by my FFL dealer before I could take posession, it still had quite a bit of slop in it (wiggled side to side)

Although not a requirement where I live that is the reason I went with the Magpul Fixed Carbine stock. By only cutting one cross notch in the fake buffer tube the stock will not lock down at any other position on the tube.