apex trigger kit on SD9VE

[Paul.Redmond]

I just recently installed the Apex spring kit and the Apex polymer trigger in my SD40VE and it was the best thing I did. Fortunately, I didn't have to file any off of my trigger. The whole process took 30 mins and it was literally a drop in install. I have fired about 150 rds through it now without any issues at all. I also installed the Galloway SS guide rod with the 20# spring as well. It's like a completely different (better) firearm now.

I did the same on my SD9VE (Aug 2016). I did have to spend two hours painstakingly filing the trigger to make it work. I was able to save myself some work by trimming off some of the excess polymer on the seam behind the trigger using a sharp penknife.

Filing the back of the trigger while it's installed is a bit tricky, but with patience, care you'll get there. Using a penknife to shave off the roughness created by the filing really makes for a nice finish too. The cost was over $100 for all the parts needed.


If you already own an SD9 series handgun, these upgrades are well worth the investment in time and money, not to mention the educational experience of completely disassembling and reassembling your firearm.


If you are contemplating these upgrades to your SD or MP, WATCH THE VIDEOS, and watch them more than once, and follow them step by step.

 

[star1]

ront sight

Thats the same problem I had trying to remove the front sight. I'm open to suggestions on how to get it off.

Put the slide in a vise. I took a round punch and hit one side with a grinder to make it flat. Take hammer and hit it harder than you think it will take to get it off (tapping it didn't do anything)

 

[Lemuel s&w]

Trigger filing

Just installed the Apex trigger on a new SD9VE. Still have factory springs. Noticed a glitch right away when dry firing...did not trip the striker, but only every now and then. Still, not acceptable. Used a high quality fingernail file to shave a bit off the back of the trigger...have dry-fired a few dozen times with each hand and it clicks every time. I will be taking it to the range on Friday...have springs coming, but depending on what I think, may not change them. LOVE the feel of the Apex trigger! Really didn't like the factory hinged trigger at all, but I assume it was to avoid further legal probs with Glock. I've put a lot of rounds through S&W .357 revolvers...a lot of rounds, so trigger pull weight is not as big a deal to me. I like the look and feel of this auto...can't wait to hit the range! The Apex install video is a MUST. I got the job done with very rudamentary tools. Proud to have another S&W in my arsenal.

 

[mnshutterbug]

After reading all these posts, I think I'd be better off paying a gunsmith $30 to do the job for me if I decide to go that route. However, I do think the pull on my 9mm is slightly less than on a friend's 40 caliber that I shot.

 

[wellwicked]

Hello Posters. My Wife Just Purchased The S&W SD9 VE. We Then Purchased The Apex M&P Polymer Action Enhancement Trigget Kit. My Cousin Installed It. I Just Realized That It Is The Wrong Kit. We Have Not Shot It Yet. Everything Seems To Work Well, The Trigger Feels Smoth. Should I Uninstall It, Trash It And Purchase The Apex SD Polymer Action Enhancement Trigget Kit?
Thank You, WellWicked

 

[SccyPilot]

Wrong Apex Trigger

If I were you I would call Apex direct or email them with your concern.

Why chance it and have something wrong...

 

[GKC]

SD wont be a great target gun... it will be a great self defense gun

Just a minor niggle...the SD 9VE IS a great self-defense gun. I just bought a new one (April 2016 production date) and the trigger is lighter and smoother than ever. I'm guessing 7 pounds (with my booger hook) and the frame has a more pronounced texture, so it's grippier. I won't need to put a grip sleeve on this one. I'm putting in the wider take down lever today, and then I'll put on night sights as soon as I can. That's all I plan to do to this great home and self defense pistol, other than run some ammo through it.

 

[mnshutterbug]

Maybe that explains why the trigger pull doesn't seem so bad on mine. They must have made recent improvements.

 

[SccyPilot]

GKC you are right...this is not a tack driver as the lockup is not the tightest however it feed and ejects anything I have been able to stuff it with with no problems at all! My trigger pull using the SW factory springs and the Apex trigger is 6 lbs. Good poundage for a self defense striker pistol...the reset with the new trigger is perfect for this type of weapon.

 

[mnshutterbug]

Maybe that explains why the trigger pull doesn't seem so bad on mine. They must have made recent improvements.

Wrong. I emailed S & W and was told the trigger pull is the same as it has always been. I'm just going to get used to it by shooting a lot and not be concerned. If I'd have been shooting a pistol with a 4# trigger pull I could see where this pistol would be a larger issue.

 

[GKC]

I'm just going to get used to it by shooting a lot and not be concerned.

That's the best thing to do!

 

[Dr Denby]

or perhaps I did not file enough of the back of the trigger away to make it work

That is EXACTLY what happened Rover.

You can do the filing with the gun assembled by the way.

Just keep filing a little at a time and then you will find that sweet spot.

I have put in a total of 7 SDVE Apex triggers and spring kits for me and my buddies and each one needed a different amount filed away. One I had thought something was defective or something I needed to file away so much. But then it hit that sweet spot and it was beautiful.

When you do, you will know right off.

I am loving my 40 trigger.

Doc

 

[mpreusse13]

Just got done installing my trigger and didn't have to file anything. Reset and fire work beautiful. I can't wait to get to the range

Sent from my R1 HD using Tapatalk

 

[Dr Denby]

Lucky ********

I'm jealous.

All 7 I have put in needed it.

Doc

 

[HyperTrigger]

CA Model SD9VE

I just installed a the Apex Trigger and Spring kit on my CA Model SD9VE. Getting through reinstalling the Magazine Disconnect with the Sear Housing Block was Brutal to say the least! I can go into it if anyone here is running into that issue.

 

[whatsay]

Its a trade off. A light trigger is wonderful to shoot but dangerous to carry or handle. A heavy trigger reduces unintentional discharges of the firearm but makes it hard to hit anything. I don't like to modify guns. So if you want a lighter trigger go with a Walther with a 5.5 lb trigger or a Bersa 9mm with a 3.9 lb trigger. But watch out for accidental discharges because they are dangerous.

 

[sgtsandman]

Generally speaking that is true but the above mentioned mods are reducing a trigger from about 8 pounds to about 6 pounds. Hardly a light trigger and no where near being a dangerous modification.

My XDs and UCII both have lighter triggers than that from the factory and aren't considered dangerous.

When considering heavy triggers in a panic situation, which one is more dangerous? The heavy trigger that is more inclined to make a person miss and hit someone else or the one that is a little lighter and will allow better shot placement that doesn't hurt anyone else? At 6 pounds, one still has to really mean it to discharge the pistol. 8 pounds and heavier is just placating the safety Nazis who don't know **** about firearms.