S&W Hammer Camming Forward Problem 586-8

[unclerandy]

This is my cousin shooting his S&W 586. There is a problem with the trigger/hammer. You can see in the second trigger pull the cylinder turns but the hammer camms forward. I've never seen anything like this before. I shot it also and it happened many times. Neither one of us short stroked it. I even removed my finger completely out of the trigger guard to make sure after every shot and it still did it. The gun has not been modified in any way and only has a couple hundred rounds through it. About 2-3 years old. Does anyone have any ideas on what is wrong?

[ame]https://www.youtube.com/watch?v=CwpCptPzHh4[/ame]

 

[OLDSTER]

That's a new one on me. Folks will be along who can help you. BTW, welcome to the forum from North Dakota

 

[ms]

It looks like the double action sear is sticking sometimes. Might just need a drop of oil down the front of the hammer.

 

[chief38]

Didn't you hear.....that's the new S&W "safety" - only shoots sometimes - you guess when. LOL!!

I know.... it's not really funny when it happens to you, but I just couldn't resist. Forgive me.

I'm guessing something has either broken or has been Bubba'd. Without it in front of me apart on a bench, I won't guess, but needs immediate attention right away. Contact S&W for a call tag today.

 

[jjfitch]

Start with the obvious before making yourself crazy!

After 2-3 years of sitting the original lubrication may have become a "plasticized" mess. Has it ever been detail cleaned?

Don't attempt this unless you are completely comfortable disassembling the S&W revolver. In the mean time you may have success loosening this up by using a "gun scrubber" type of aerosol. Take the grips off first! Use it like a pressure washer and really flush things out. Let it dry and then lube using "copious" amounts of thin (Think CLP or transmission fluid) to lube and continue flushing out the "smuts"!

I'm a heavy use revolver shooter (competition) and after cleaning and prior to any range time I apply about 6-8 drops of ATF to any area the rotates or slides!

Enjoy this fine example of S&W artistry!

 

[armorer951]

You don't mention how long the gun has been in service, or whether your cousin is the original owner.

It appears that the double action sear is not resetting for some reason. This DA sear "re-set" occurs right at the end of the trigger return. The sear spring or sear may be compromised in some way or be sticking, the sear itself may not have been fit correctly when initially installed, or perhaps it's related to the rebound slide spring. A lighter rebound spring can cause this. There are other possibilities, but these would be the most common contributors.

If you are able to do so, I would suggest a good cleaning, inspection and re-lubrication of the internals. If the rebound slide spring has been altered or replaced with an aftermarket one, replacement of the spring with an OEM one may solve the problem.

As others have suggested, since it's under warranty, a return to Smith and Wesson Customer Service may be the best alternative.

 

[Dougaz]

I don't have a clue whats wrong but your video was awesome and what a great way to demonstrate the problem.

Well done!

Doug

 

[unclerandy]

My cousin is the first owner and only owner. The gun was bought new about two years ago. I personally took the gun apart and cleaned it thoroughly. It wasn't very dirty when he left it with me but way over lubricated. I cleaned it and lightly oiled appropriately. All factory parts nothing modified. It will go back to S&W but I really really want to know whats causing this. I've been shooting and "gunsmithing" for 40 years and I've never seen/felt this type of malfunction. While frustrated I'm absolutely fascinated by it and want to understand exactly how its happening.

 

[unclerandy]

I don't have a clue whats wrong but your video was awesome and what a great way to demonstrate the problem.

Well done!

Doug

Thank you, I was glad that I captured it happening.

 

[armorer951]

If you cycle the action very slowly, (with the sideplate on) at the end of the trigger return you will, or should, hear two clicks. One click will be what's called the "hook" at the front of the of the trigger passing fully over the bevel on the cylinder stop. You should see the top or "ball" of the cylinder stop snap to the rear as this click is heard.
The other click you should hear is the sear resetting. sometimes these two distinct clicks happen at the same time, so you can't hear them separately. Usually though, there are two very distinct clicks, with the sear click happening immediately after the cylinder stop has re-set.

 

[unclerandy]

If you cycle the action very slowly, (with the sideplate on) at the end of the trigger return you will, or should, hear two clicks. One click will be what's called the "hook" at the front of the of the trigger passing fully over the bevel on the cylinder stop. You should see the top or "ball" of the cylinder stop snap to the rear as this click is heard.
The other click you should hear is the sear resetting. sometimes these two distinct clicks happen at the same time, so you can't hear them separately. Usually though, there are two very distinct clicks, with the sear click happening immediately after the cylinder stop has re-set.

Thanks, I'll have him check this.

 

[unclerandy]

This is a de-milled no dash 686, but the same principle applies. Slow motion of internals during trigger return. Watch closely as the trigger hook passes over the bevel on the cylinder stop and the stop resets. (moves backward)

Then, as the trigger moves a bit more forward, the DA sear re-sets.
If his sear is not resetting, during the next trigger pull, the trigger passes by the DA sear, and the hammer is not raised. As you observed, the hammer "cams forward" because the rebound slide containing the hammer seat has moved back, allowing the hammer to move forward as this important safety obstruction has been temporarily removed.

I'm not getting any motion with your attachment.

 

[armorer951]

Anyone else having issues opening the video? If so, I'll take it down.

Clicking on the photo should re-direct you to Flickr. Thanks

 

[Protocall_Design]

Not working for me, either.

 

[armorer951]

OK thanks, I'll take it down. I have no idea how to post videos. It is an MP4 file. I thought clicking on the photo would redirect you to Flickr.

 

[unclerandy]

Anyone else having issues opening the video? If so, I'll take it down.

Clicking on the photo should re-direct you to Flickr. Thanks

It does redirect but there's no motion. I would really love if you can get it to work or even pm a link to me a working version. Thanks for your input!

 

[armorer951]

It's in slow motion. (very slow) So there's no motion when you click on the arrow in Flickr ??

 

[unclerandy]

It's in slow motion. (very slow) So there's no motion when you click on the arrow in Flickr ??

There isn't an arrow. If you look at the Flickr url it shows jpg at the end of it..

 

[armorer951]

I'm not sure I'm permitted to show a Youtube video link here or not.....or if it will work. Be advised that the video runs in slow motion, (very slow) and shows just the end of the trigger recovery cycle. Wait for it, or fast forward to about 0:55.

It's a de-milled 686 frame and internals........


YouTube

 

[Protocall_Design]

The you tube one is working for me. The main actions you're looking for are from about 0:55 to about 1:10.