...despite the fact that .38 Special is substantially less powerful than 9mm.
The Underwood 38+P I carry in my J-frame snubby advertise a 125 grain XTP at 1,250 which is about 100 fps faster than a 124 grain 9mm round.
I wouldn't believe those numbers. That is 357mag numbers. Underwood probably tested with a 6" barrel to get that. Anything full weight over 1000fps in a snub is super hot
In the spirit of apples to apples, what does a 9mm do in a 1.75" barrel?
I wouldn't believe those numbers. That is 357mag numbers. Underwood probably tested with a 6" barrel to get that. Anything full weight over 1000fps in a snub is super hot
I chronyed and that load was about 1150 in 4" model 15. Got some voodoo going on there.
Voodoo is a form of magic. There is no such thing as magic.
.
Most people that buy ammo from Underwood or Buffalo Bore do so because it is the hottest ammo available. They have a strong financial motive to err on the side of more pressure.
I buy the Underwood 38+P because I don't enjoy shooting .357 loads out of my Scandium snubby. Not worried about 38+P pressures. Shorter cases make ejection easier also with the short rod on a snubby.
I chronyed and that load was about 1150 in 4" model 15. Got some voodoo going on there.
Careful with +P in a Model 15. You don't want to potentially damage a fine old revolver. Some might reply that S&W made K-frame .357's, but those used different steel in the cylinders and you will recall they had forcing cone cracking issues.
Was in a gun store yesterday and saw that a 50 round box of Remington range/FMJ .30SC ammo was $39.99. Nearby was the same Remington range ammo, in 9mm, for $12.50. The .30SC is not long for this earth.
What can the .32 caliber do that a 38 caliber can't?