- Joined
- Mar 13, 2024
- Messages
- 2
- Reaction score
- 0
Hello everyone,
Recently acquired an M&P 2.0 Perf Center and couldn't be happier. I am new to the gun world and have a lot of questions relating to the gun, where to buy replacement parts from, and how to go about extracting the maximum out of it.
My gun has a 5 inch ported barrel and optics ready slide with a Holosun 407 red dot and Streamlight 8 light laser combo on it. Since I had bought it used, there are some issues I am dealing with, which is what brought me here, because there seems to be not much support available from the manufacturer (I have called them multiple times during business hours and always get the message that they are closed!!??).
Hopefully, joining here and learning will help me resolve them.
Where do I go on the forum to ask questions about what I struggling with? The first issue pertains to the red dot (Holosun 407CX2) and the fact that the right side screw stays loose and does not thread into the slide. I put blue lotite on it, but that didnt help. The other (left side) screw is tight and is keeping the red dot in place, but I dont know for how long.
I cant seem to find the answer. The screw has broken off inside the hole, and I dont know where I can buy a replacement slide if needed. I cant find one (optics ready, ported, suitable for a 5 inch ported barrel).
Anyway, I am learning to shoot now by dry firing and going to the state land north of where I live, and practice there on targets to strengthen my grip and learn to isolate my trigger finger (left-handed with right eye dominance).
I appreciate you all helping a newbiw out.
Thanks.
Recently acquired an M&P 2.0 Perf Center and couldn't be happier. I am new to the gun world and have a lot of questions relating to the gun, where to buy replacement parts from, and how to go about extracting the maximum out of it.
My gun has a 5 inch ported barrel and optics ready slide with a Holosun 407 red dot and Streamlight 8 light laser combo on it. Since I had bought it used, there are some issues I am dealing with, which is what brought me here, because there seems to be not much support available from the manufacturer (I have called them multiple times during business hours and always get the message that they are closed!!??).
Hopefully, joining here and learning will help me resolve them.
Where do I go on the forum to ask questions about what I struggling with? The first issue pertains to the red dot (Holosun 407CX2) and the fact that the right side screw stays loose and does not thread into the slide. I put blue lotite on it, but that didnt help. The other (left side) screw is tight and is keeping the red dot in place, but I dont know for how long.
I cant seem to find the answer. The screw has broken off inside the hole, and I dont know where I can buy a replacement slide if needed. I cant find one (optics ready, ported, suitable for a 5 inch ported barrel).
Anyway, I am learning to shoot now by dry firing and going to the state land north of where I live, and practice there on targets to strengthen my grip and learn to isolate my trigger finger (left-handed with right eye dominance).
I appreciate you all helping a newbiw out.
Thanks.
