Recent content by rcp1936

I use a Barami Hip Grip on my 65-5 3" 357

My MP9C with the Apex breaks at 3.5lbs after a 1/16 take up My Ruger Sr1911 breaks at 4.5lbs after a 1/16 take up So my MP9C is just like a 1911 so much so I had a TS installed

79 and carry a 65-5 3" with Barami hip grip Easiest to carry IWB and no safety Goes bang and if not pull the trigger again If for some unknown reason I would need to carry a hi capacity it would be my CZ 75 BD

So do I Love the trigger on my CT9

I installed a wolf regular power and the pull is 9--9-1/2 lbs It is smooth and very acceptable Haven't been to range to check it out yet

65-5 3" 357 with Barami Hip Grip

65-5 3" 357 loaded with Buffalo Bore 38spl gold dot +P Barami Hip Grip

I have a Ruger SR1911 and a MP9C with the APEX FSS and Trigger mod BOTH have 1/16 free travel The SR 1911 then breaks ar 4.5 lbs The MP9C breaks at 3.5

Well I used the reduced power on my 65-5 with no problem But yes I did use the reduced power I'll try a full power As it is now the DA is over 11lbs SA is great at 3.5

An old thread but I bought a model 10-14 and don't like the trigger at all compared to a model 10 I bought in 94 and then like a fool sold it There is no firing pin like older models and trying to improve the trigger with Wolf Springs gave me over 60% light hits S&W ruined a classic with the...

After having the Apex installed I knew I needed a TS I didn't want the capability on the right side so the armorer at the LGS took it off and there is no plug Works OK Here are pics

Agree the 3 inchers have great lines Nice collection

It can also be carried using a Barami Hip Grip I have the same gun and that is what I use

I wish I had one instead of my 10-14 S&W ruined a classic with the internal lock but worse with the new firing pin removed hammer Putting Wolf Spring in and getting a 7.5 pull resulted in light hits I had to go back to the stock 11 lb pull

It is my carry gun