4006 ejector where?
- Thread starter Stevenas
- Start date
Register to hide this ad
novalty
Member
I would contact S&W directly.
Even if I bought it used?
Pardon my stupidity but what is a "call tag"?
(is it rather called an extractor?)
I have e-mailed S&W, waiting....
How long does it usually take them to respond or should I call them?
thanks
I would call them, email responses can take a long time.
The extractor is on the right side of the slide - it pulls ("extracts") the case out of the chamber.
On the way back, the case lip hits the ejector lever which is in the left side of the frame, it's one of those levers you have to push down to get the slide back on. This lever stops the case from going back any further, and the continuing pull of the extractor flips the case up and out to the right.
The extractor is on the right side of the slide - it pulls ("extracts") the case out of the chamber.
On the way back, the case lip hits the ejector lever which is in the left side of the frame, it's one of those levers you have to push down to get the slide back on. This lever stops the case from going back any further, and the continuing pull of the extractor flips the case up and out to the right.
Yeah, I know. I was just poking fun at my blunder at calling the extractor an ejector.
But there is the "ejector port" LOL
thanks!
It's hard to see those sly grins in print! Sometimes it's hard to tell when there's a joke in play.
Really, give S&W support a call, it will be much faster.
Repaired!
Well, I sent the pistol off to S&W and got it back in one week!
They replaced the extractor for free!
I shot 100 rounds through it today and had one failure to feed.
I'm thinking the spring is bad with one of my mags so I ordered 3 new springs from Wolf for replacements.
Well, I sent the pistol off to S&W and got it back in one week!
They replaced the extractor for free!
I shot 100 rounds through it today and had one failure to feed.
I'm thinking the spring is bad with one of my mags so I ordered 3 new springs from Wolf for replacements.
Palmetto Sharpshooter
Member
- Joined
- Aug 24, 2005
- Messages
- 864
- Reaction score
- 208
- Joined
- Sep 10, 2017
- Messages
- 4
- Reaction score
- 0
Replacing Ejector Bar on s&w 4006...??? ( Old Thread )...
Hello..!! Bill Watson here, in L.A. , Calif. , I was Wondering why You Had To Replace the Ejector Bar...?? As I was Told / Advised that the Ejector Bars Break Sometimes upon Inserting the Magazine Too Harshly..." how Many Rounds were fired previous to an ejector Bar Problem..?? How Much was the Changeout..? Did You Gain any Insight / Info. About ejector Bar damage re: the 4006 specifically...?? Please Fill me in, Thanks...( I realize Your Problem was 6 years ago...I Don't know if You are Still online....here , but I am a New Member...Today...9-10-2017.
Hello..!! Bill Watson here, in L.A. , Calif. , I was Wondering why You Had To Replace the Ejector Bar...?? As I was Told / Advised that the Ejector Bars Break Sometimes upon Inserting the Magazine Too Harshly..." how Many Rounds were fired previous to an ejector Bar Problem..?? How Much was the Changeout..? Did You Gain any Insight / Info. About ejector Bar damage re: the 4006 specifically...?? Please Fill me in, Thanks...( I realize Your Problem was 6 years ago...I Don't know if You are Still online....here , but I am a New Member...Today...9-10-2017.
