15 rd mags for 6906?

[johornp228]

can some one point me to them?

 

[johornp228]

can some one point me to them?

 

[smith10]

15 rounders are simply 5900 series mags. They fit and function perfectly. They are longer to hold more rounds so they will extend from the bottom of a 6906 grip. You can get a plastic sleeve to fit on the mags to match the contour of the grip.

CDNN and others will have 5900 mags. Oh and stick with factory or Mec Gar.

 

[ispcapt]

Here's a 6904 with a 15 rd 59XX mag and the filler that Smith10 mentioned.

 

[Guest]

The factory did make 20 round mags for the 69xx family, they have a lip on the front that makes it impossible for them to fit into the larger frame 59xx family. Otherwise, you can use a standard 15 rounder as noted above, either with or without the plastic adapter.

Here's a pic of three versions, the standard 12 rounder on left, center is the 15 rounder with the PGS grip adapter and the one on the right is the 20 rounder for the 69xx family.

 

[PX15]

Where can the "fillers" be purchsed?

Thanks!

Jesse

 

[max]

Try CDNN.

 

[PX15]

Originally posted by max:
Try CDNN.

Thanks, I'll check 'em out.. My new CDNN catalog doesn't show anything like that, but you never know.

Best Wishes,
Jesse

 

[WaterburyBob]

Originally posted by PX15:
Where can the "fillers" be purchsed?

Thanks!

Jesse

Brownells.

"Mag Butt Plate/Grip W/2 Adapt", Brownells Item # 940-000-654

 

[shawn mccarver]

Originally posted by johornp228:
can some one point me to them?

Any high cap mag for the 59 Series will work in the 6906.

 

[johornp228]

Thanks I just need to find the butt plates then.
Does anyone know were i can find them in 9mm?

 

[PX15]

Originally posted by WaterburyBob

Brownells.

"Mag Butt Plate/Grip W/2 Adapt", Brownells Item # 940-000-654[/QUOTE]


Thanks!

Jesse

 

[johornp228]

Originally posted by PX15:

Originally posted by WaterburyBob

Brownells.

"Mag Butt Plate/Grip W/2 Adapt", Brownells Item # 940-000-654

Thanks!

Jesse[/QUOTE]

Will they work on 9mm. they said 40s&w

 

[bad_man_ one]

From my Smith and Wesson invoice:
Location - - Product code - - - - Description - - - - - - - - - - - - (Price)
E02H - - - - - 242120000 - - Grip Plus2 Butt Plate Rev. - - - - - - ($8.00)

Magazine Butt Plate +/2 Adapters from S&W, $8.00 ea.
Brownell's Magazine Butt Plate +/2 Adapters, $10.15 ea.
Regards,
BM1

 

[PX15]

Originally posted by bad_man_ one:
From my Smith and Wesson invoice:
Location - - Product code - - - - Description - - - - - - - - - - - - (Price)
E02H - - - - - 242120000 - - Grip Plus2 Butt Plate Rev. - - - - - - ($8.00)

Magazine Butt Plate +/2 Adapters from S&W, $8.00 ea.
Brownell's Magazine Butt Plate +/2 Adapters, $10.15 ea.
Regards,
BM1

BM1:

And thank you too!

Jesse

 

[SergeantC]

I don't know if you can still get them, but Ramline makes or made 15-round 69XX series magazines that fit flush into the 6906 grip. They were about the same size as the factory 12-rounders.

I'm not certain what Ramline's reputation for quality is, but I've had no problems with the three I own.

 

[PX15]

Originally posted by SergeantC:
I don't know if you can still get them, but Ramline makes or made 15-round 69XX series magazines that fit flush into the 6906 grip. They were about the same size as the factory 12-rounders.

Sergeant:

My 5906 came yesterday, and I ordered two extra 15rd. 5906 mags along with the deal. I will use one of these 15rd mags with the S&W grip+2 and be good to go.

Thanks,

Jesse

 

[SIGWolf]

There is a guy on gunbroker that has a pile of the 15 rounders with collars used.

 

[shawn mccarver]

Originally posted by johornp228:
can some one point me to them?

Any mag for the 59 series fits and functions. You may have to buy an aftermarket "sleeve" if you don't like the way it looks sticking out of the pistol.

US Customs had the 15 round mag tubes on their 69 series guns and they had a "sleeve" that fit over the mag tube that blended the mag tube in with the grip appearance wise.

 

[PX15]

And,
The "sleeves" are the S&W "Grip+2"mag plate extenders. Currently they are on backorder. Eight bucks and they make the 15rd 5906 mags look like they were standard issue for the 6906.

Jesse

 

[varoadking]

Originally posted by PX15:
And,
The "sleeves" are the S&W "Grip+2"mag plate extenders. Currently they are on backorder. Eight bucks and they make the 15rd 5906 mags look like they were standard issue for the 6906.

Jesse

They were to have been back in stock this past Friday. Waiting on 14 of 'em myself...

 

[PX15]

Originally posted by varoadking:
They were to have been back in stock this past Friday. Waiting on 14 of 'em myself...

vrk:

Well, I would surmise that with the 210+1 rounds that you would have available for your 6906 you are ready for any circumstance that might occur.

Best Wishes,

Jesse