25-2 vs evil

feets

Member
Joined
Aug 3, 2012
Messages
68
Reaction score
25
Evil was found frolicking about on Sunday morning. A friend and I went to check the zero on the new sights for his Ruger bottom feeder. It seemed like as good a time as any to check the new Power Pistol loads in the 25-2 and my Kimber. The lack of Bullseye is killing us.
A quick tweak had his sights close enough to stack two rounds in one hole on his 15 yard target. It didn't take much longer to get the chrony data from the new loads.
Despite the pleasant morning and satisfactory results, something wasn't right. It almost felt like someone was watching us. Someone with bad intent.
As we were preparing to leave, we found the source of evil. Down at the far end of the range a ten inch plate was swinging ever so slightly in the breeze. It's slight shudder signaled it's intent to pounce as soon as we turned our backs.
With smooth and subtle movements, I slipped another moon clip in the big Smith. My shooting partner cleared the way and I was at the line in two quick steps. With a well practiced motion, I leveled the revolver and went for the trigger. I pulled it again and again until the firing pin found spent primers. The Smith barked six round. The sinister gong rang out six times. It jumped with each hit, staggering back each time.
When I lowered the gun, the gong hung limp. One chain broken, it swayed drunkenly clinging to life.
To guarantee it's ego was shattered, I handed my friend another clip. He drilled it five more times and gave it a final warning shot.

I don't think that plate will be bothering us again.



In all honesty, I consider it a tribute to the gun and the shooter when a man who has only put six rounds through a particular style of gun can pick it up months later and put rounds on a ten inch target at 50 yards.

We need to find a longer range. 50 yards is getting too easy with the 25-2. :D
 
Last edited:
Register to hide this ad
After Kirk lowered the gun was when I realized he only had six rounds through it and those were early this summer.
He's a good shot but it still speaks well for the tool in use.
 
In lieu of a longer range, you can always just hang up a smaller target. A 5" gong at 50 yards might prove sufficently humbling, at least for a little while. I envy your 25-2. I let mine get away about 20 years ago and have mourned it ever since. I make do with a 5" 625, but it just ain't the same.
 
I just tried Win. Super Target in my 25-2 with 230 jacketed (Hornady). Mine has slightly large throats and doesn't do that well with cast bullets but does extremely well with 230 factory. Have you ever used any of the copper coated like Berrys or similar in yours? The Hornady 230 and WST worked very well, just a little expensive.
 
The load used was a Rainier 200 gr round nose plated over a middle weight charge of Power Pistol.
So far, the 25 has liked everything I've fed it.
 
Nice shooting. I'm not sure I could even SEE a plate @50 yards well enough to hit it. My 25-2 is one of those with the naval cannon chamber throats and cast bullets have not fared well. It seems to like the 230 FMJ for which I believe it was intended well enough. Do you use full-moon clips or the halfies? If the full, what tool, if any, are you using to load and unload them? Mine loads them well enough, but the empties are still troublesome to remove. It's one reason I'm leaning back to the half-moons.
 
I still like the simple round tube de-mooners as the best tool fro removing the cases from full moon clips. You can make your own with any 1/2" ID tubing and cut a relief back on 3 sides about a 1/8". Slip over the case and twist, out pops the case. If you need a picture I have several different ones I use, let me know.
 
I shoot mine with full moon clips with a 225 Mo Bullet 225 gr round nose flat point over 5.3 of 231. It's a tack driver. Never measured the throats etc. Maybe I got lucky.
 
holes

I'm not as good a shot as you and only shoot tin cans with my 25-2, but it's my favorite because of the big old ragged holes it makes in the cans. My 686 and 27-2 make much too neat holes.
 
I love my 25-2. Hornady 230gr.FP with Bullseye does a nice job. They do shoot well.

D7K_1799.jpg


:):):):):)
 
Back
Top