4006 CHP and 4013 sighting

^^^^ that's a great looking gun. Weren't these some grail type guns for some not too long ago?
I don't have any 40's but being a CHP gun, and in that kind of condition............:D
 
RedCardinal said:
I also noticed that the CHP barrel had a little groove in the unlocking shoulder that is not on the regular 4006TSW barrel. Take a look at the photo. What is the reason for this? The CHP barrel is the top barrel.
Click to expand...

Dunno. Not discussed in the last 3rd gen update (done 3 years after the CHP started getting their new guns).

Might be something specific to something one of their agency smiths requested, or, it might just be some ongoing revision or machining change the factory engineers decided to incorporate.

I remember when I saw a change in the barrel lug machining of a 4566TSW barrel, from one gun to the next (as received). When I asked about it, out of curiosity when calling about something else, I was told that they'd made a machining change when the engineers decided the previous way of machining the barrels was no longer necessary. Also, like how they started "breaking" through the little connecting bit of steel between the firing pin channel and the rear of the ejector depressor plunger channel (not something you'd ever even see unless removing the manual safety assembly).

I've got a 4513TSW barrel that has an "extra" lengthwise, shallow groove machined high on the right side of the feedramp. The rearmost end of the cut doesn't interfere with feeding, but looks a bit weird. I've seen another 4513TSW barrel machined the same way, in the same serial number range. I asked about it once and was told that sometimes they may change machining methods for reasons only known to the engineers. (I also wondered if they used a batch of barrels where the CNC machine operator let a minor hiccup slip through, but since it didn't cause any problems they didn't scrap the barrels. ;) )
 
Last edited:
Well I couldn't help myself. I have been lusting after one of these since they were adoped. The price was just too good! Just got off the phone from placing my order. He said he had a few left and was expecting another shipment tomorrow.

Going to go great with my 4006 Colorado State Patrol in Melonite :)

4006_CSP_Melonite.jpg
 
Wow, that Colorado State Patrol in melonite blows away the CHP guns with ugly rail, not even close when it comes to curb appeal/looks! What a fine looking pistol. :D
 
Went to Summit's website yesterday, but it appears the latest batch of the 4006TSW's is sold out. Can somebody tell me the price they were asking?
 
I found one a few years ago and obviously paid more than what Summit is asking but that's how things go.
 
Last edited:
I just picked up my CHP 4006. Mine is in about 90-95% condition. Looks barely shot! The agency serial number on the frame, slide and barrel is E9969. One of the mags had "Geller #11118" on a sticker fixed to the floor plate. Must be the officers name and badge number. Trigger is heavier than my 4026 though.
 
MackTech said:
I just picked up my CHP 4006. Mine is in about 90-95% condition. Looks barely shot! The agency serial number on the frame, slide and barrel is E9969. One of the mags had "Geller #11118" on a sticker fixed to the floor plate. Must be the officers name and badge number. Trigger is heavier than my 4026 though.
Click to expand...

Man, when my CHP buddy talked me into becoming a cop, they were in the 9000 series badge numbers.

Using a printed tape strip (or even older Dymo labeling) became a not uncommon practice for identifying individual LE magazines.

The problem could come when the cop applying the tape/labeling didn't realize he/she still had to allow for the "hole" to be punched so mags that used buttplates and buttplate catches (with posts) could be disassembled for cleaning, as needed. ;)
 
My two 4006TSW (CHP) pistols from Summit arrived yesterday. Both are in truly great shape with very light holster wear on the metal and light to moderate wear on the grips from a decade of daily carry. Neither of the two show any scratches or dings from use. Bores are excellent. The 4006TSW (CHP) was one of my grail guns and I'm extremely pleased with both their condition and the level of service from Summit Gun Broker.

One of the pistols has grips with the curved back strap, so perhaps the officer that had this one swapped out the originals. I kind of like having an example of both types... All six magazines are AccuGuide, two of the six are LEO marked and one has a black follower (the rest are blue).

Lots of new factory spares are floating around right now for this model. You can find original springs, blue followers, firing pins, sights, grips and blue factory polymer boxes at Midway, Brownells, and/or Numrich for very fair prices. Heck, Midway has the recoil springs for $1.99 each! Downloadable copies of the manual are available on the Smith & Wesson site or you can call customer service and they'll send you a printed copy for free.

Many thanks to smith10 for the original post.

rkwood
 
Last edited:
I watched them since CHP got rid of the older ones and the new gun never came up for sale unless a retired CHP tried to cash in . I saw a few for 900 to 1000 range back then . I did a nice clean older CHP 4006 a gun guy must of had it , has a great trigger and gun was taken care off .
 
Well, I always said that if these came up for sale I'd buy one, despite my dislike of .40 S&W. I guess I'll be calling Summit on my lunchbreak come Monday.

I know a small run of these exact guns were made in 9mm. Does anyone know where they wound up? I'd love to pick up one of those, but the CHP guns will do nicely in the meantime.
 
StickShift said:
Well, I always said that if these came up for sale I'd buy one, despite my dislike of .40 S&W. I guess I'll be calling Summit on my lunch break come Monday.
Click to expand...
The mounting pressure to buy one of these is stunning... :o ... but I really don't have the money right now. :( I'm actually grateful that it *is* a .40 which helps ease the pain I'm feeling just a little. ;)
 
Received mine also. I got one of each, and if they were used, you can't tell. Now, all of the mags for the CHP are marked Law Enforcement. Are these valuable due to that? Maybe we found a new friend for the Forum. Who knows what else he will come up with in the future. On a side note, my FFL said the gentleman at Summit, was polite, knowledgeable, and a pleasure to do business with.
 
Back in 2014, Mark at Summit had Remington 870 Wingmaster riot guns from the early 80s. They were police model trade-ins from the Arizona Highway Patrol, $165 each in a group buy.

So, yes, it definitely pays to keep an eye on the Summit website.
 
You must log in or register to reply here.

Similar threads

X
Current value of 4006 tsw chp
Replies
11
Views
688
Exchipy
Exchipy
D
For Sale WTS S&W CHP 4006TSW with original box and 2 LE mags!!! Price lowered.
Replies
3
Views
603
Dave Baird
D
U
Making a list of 3rd Gen TSW Models with Integral Rails
2
Replies
32
Views
1K
scottr
S
ACEd
3rd Generation Match Marking of Frame, Slide, Barrel
Replies
6
Views
1K
AlHunt
A
DAOTSWGUY
R&S Recoil Buffers for a 4006TSW
Replies
17
Views
468
DAOTSWGUY
DAOTSWGUY

Latest posts

Back
Top